EWEADN MK68 Keyboard - User Manual

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

I. Basic Parameters

Product Model: MK68

Battery Parameters: 3.7V 2000mAh (Fast charging not supported! Please connect your computer for charging)

Input: 5V=200mA

Connection Modes: Wired connection, Bluetooth connection (5.0), 2.4G connection

Wireless Version: 2.4G, BLE 5.0

Wireless Connection Distance: 10 meters (in unobstructed open environments)

Charging Port: Type-C (USB-C)

Supported Systems: Windows, MacOS, iOS, Android

Product Size: 28mm * 308mm * 102mm

Manual measurement of relevant parameters. In case of any discrepancies, the actual product shall prevail!

II. Battery Indicator

Low battery state: The red light flashes quickly.

Charging state: The light is always red.

Fully charged: The light returns to normal or follows the lighting effect.

III. Sleep Mechanism

In wireless mode, without any operation, the backlight will turn off after 2 minutes. Press any key to wake up the keyboard. After 10 minutes of no operation, the keyboard enters deep sleep mode. Trigger any key to wake up the keyboard.

IV. Lighting Settings

Switch lighting effects: FN + Back

Lighting brightness: FN + ↓ (decrease), FN + ↑ (increase)

Lighting speed: FN + ← (decrease), FN + → (increase)

Lighting effect modes:

1. Always on mode (default)
2. Guide the world
3. Breath mode
4. Press and go
5. Follow the flow
6. Dripping Ripples
7. Flowing Light Overflowing Color
8. Flowing Light
9. Highlighting Dots
10. Instant Trigger
11. No Trace on Snowy Feet
12. Button Ripple
13. Blossoming Wealth
14. Running Horse Light Effect
15. Rotating Storm
16. Snake shaped Running Horse
17. Starry Dots
18. Flowing Stream
19. Diagonal Transformation
20. Sinusoidal Light Waves

V. Combination Key Function

VI. Connection Method

1. 2.4G Connect

Mode: Insert the dedicated receiver that has been paired with the code, and turn the switch to the "ON" position. Press FN + B to enable 2.4G mode, and the keyboard can be used normally.

[2.4G Connection Diagram]

2. Bluetooth Connect

Mode: Turn the switch to the "ON" position. There are three Bluetooth channels in total: FN + Z: Bluetooth 1, FN + X: Bluetooth 2, FN + C: Bluetooth 3. Turn on Bluetooth pairing on the device, and the keyboard can be used normally.

Bluetooth Name: MK68

[Bluetooth Connection Diagram]

3. Wired Connection

Mode: First, plug the connecting cable into the TYPE-C interface, and then connect the other end to the computer. Press FN + V to enable wired mode, and the keyboard can be used normally.

[Wired Connection Diagram]

VII. List of Items

1. A keyboard
2. One TYPE-C line
3. 2.4G receiver
4. One manual warranty card

Quality Assurance Card

Thank you for purchasing products from EWEADN. To ensure you can use this product with peace of mind and better protect your rights, EWEADN strictly implements the joint information product department of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the "Repair, Replacement, and Return of Microcomputer Products" jointly issued by the State Administration for Industry and Commerce On the basis of the Goods Liability Regulations, EWEADN implements after-sales service and hereby makes the following commitments:

1. Service Validity Period:

Effective from the date of purchase, the date recorded in this certificate shall prevail.

2. Service Content:

From the date of purchase, any product malfunction caused by poor electrical performance will be free of charge within one year for maintenance. (The specific maintenance matters shall be handled by the provincial representative or the former product headquarters in the region)

3. Not Within the Scope of Services:

1. Those who have exceeded the effective service or free repair period.
2. Failure to use, maintain, or store according to the correct instructions, resulting in malfunction or damage.
3. Malfunctions or damages caused by unauthorized repair agencies for products that are not.
4. Products without dealer registration information and seal on the three guarantee certificate.
5. Unauthorized alteration of the content of the three guarantees certificate.
6. Consumers can remove the QC PASS sticker at the bottom of the product themselves.
7. Defective products caused by force majeure (such as earthquakes, fires, floods).
8. Product defects caused by human factors (such as operational errors, handling damage, bumps, input discrepancies), suitable voltage, etc.
9. Other malfunctions or damages caused by non-product design, technology, manufacturing, quality, and other issues.

Customer Information

User's Name:

E-mail:

Model No: MK68 keyboard

Tel. NO:

Date of Purchase:

This certificate is an important basis for the after-sales service of EWEADN products. Please keep it safe! Note: Please fill in each item clearly, do not make unauthorized changes, and keep this warranty service card properly to safeguard your legitimate rights and interests. If you need service or have any questions, please consult your local dealer or contact EWEADN.

Certificate of Conformity

QC PASS 0006