OYPLA Plastic Shelving

Safety Information

Please ensure you read and fully understand instructions before use.

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on this condition, which no representative of the company can waive or change.

• This product is not a toy, and is only to be used for its designated purpose.
• This product is intended for indoor use only.
• Never carry out alterations or modifications to this product.
• Make sure to load the platform evenly, ensuring that the weight is balanced.
• Leaving the product outside and exposed to weather, especially direct sunlight, rain and salt air, will speed the weathering process. This can be slowed by removing the product from these conditions, or covering the product with a suitable cover.
• Do not drag the shelving unit; always lift it with no contents on board when you wish to move it.
• Only clean the shelving with a damp or dry cloth – do not use abrasive or industrial chemicals, as these may damage and weaken the structure.
• Make sure that the plastic racking is placed on even ground to avoid the product falling when items are placed on it.
• Do not discard any of the packaging until you have checked that you have all the parts and fittings required.
• If the product is damaged or has any defects, please contact cservice@oypla.com.
• It is recommended that the weight is evenly distributed on each shelf, to avoid any top-heaviness.
• Ensure to read the assembly instructions carefully to ensure no damage to the product.
• Keep heavier items towards the bottom of the shelves.
• Keep shelving dry at all times to prevent any slip hazards.
• Do not climb the shelving. Never allow children or pets to do so, either.
• Warning! Do not exceed the weight limit of 20kg per shelf. Doing so may cause product failure and/or personal injury.

What's In The Box?

Please note that you will be referring to the below parts list during assembly. If any of the below parts are missing or damaged, please contact our dedicated team at cservice@oypla.com.

Assembly Instructions

Please refer to the below information to help assemble your Oypla product. If you require assistance with the assembly of your Oypla product, please contact our dedicated team at cservice@oypla.com.

1. Start with one of the plastic shelves. Attach the four feet provided to the bottom of the shelf, forming the base of the shelving rack.
2. Next, apply four poles – one to each corner – to the base. This will create the foundations for the next shelf to be placed upon.
3. Repeat step 2 until the unit is fully assembled.
4. Simply attach the four plugs to the top of the unit, one in each corner, to finish.

Have a Question About Your Purchase?

Our dedicated customer services team are happy to help. Contact them via:

Telephone: 020 3600 22 55

Email: cservice@oypla.com

Live Chat: www.oypla.com

Consider the Environment!

By recycling the cardboard box in which this product was packed, you contribute towards helping the environment. If you see a recycling logo such as the below on the packaging, it can be recycled. If a recycling logo is not present, please check with your local authority before recycling.

[recycling-symbol] [recycling-symbol] [recycling-symbol]

PLEASE RETAIN A COPY OF THESE INSTRUCTIONS FOR FUTURE CONSULTATION

An Official Oypla Branded Product.

Imported by Oypla.com LLP, Uxbridge, UB8 2FX.