ENDURA® FLOOD SPLIT
Product Information and Installation Guide
Brand: LEDVANCE
Product Overview
The ENDURA® FLOOD SPLIT series by LEDVANCE offers solar-powered floodlights designed for efficient outdoor illumination. This document provides technical specifications, dimensions, and installation guidance for the available models.
Available Models
| Model Name | EAN | Wattage (W) | Light Source Output (Im) | Color Temperature (K) | Voltage (VDC) | IP Rating | Beam Angle (°) |
|---|---|---|---|---|---|---|---|
| ENDURA FL SPLIT SOL SEN 10W 840 RC | 4099854276675 | 10 | 1450 | 4000 | 4.2 | 65 | 120 x 60 |
| ENDURA FL SPLIT SOL SEN 30W 840 RC | 4099854276699 | 30 | 4550 | 4000 | 6.4 | 65 | 120 x 60 |
Technical Specifications & Dimensions
Detailed specifications including weight and physical dimensions.
Weights
- 10W Model (EAN 4099854276675): 985 g
- 30W Model (EAN 4099854276699): 1960 g
Dimensions
Measurements are provided in millimeters (mm).
| Model | W (Width) | L (Length) | H (Height) | W2 | L2 | H2 |
|---|---|---|---|---|---|---|
| 10W | 202 | 221 | 31 | 153 | 147 | - |
| 30W | 255 | 374 | 49 | 200 | 191 | - |
Note: Dimensions are illustrative. Please refer to specific product diagrams for exact placement.
Installation Guide
Follow these steps for proper installation of the ENDURA® FLOOD SPLIT floodlight.
Step 1: Mount the Solar Panel
The solar panel can be rotated 270° [?] and swiveled 360° [?] to optimize sun exposure. It attaches to a mounting bracket using screws. For the 10W model, the bracket dimensions are approximately a=83.5mm and b=75mm. For the 30W model, a=165mm and b=83.5mm. The mounting requires a Ø8mm hole.
Diagram Description: Shows the solar panel with a mounting bracket, indicating rotation and swivel points, and dimensions for attachment.
Step 2: Attach the Floodlight
Connect the floodlight unit to the mounting bracket. This typically involves securing it with screws.
Diagram Description: Illustrates the floodlight being attached to the solar panel's mounting arm.
Step 3: Connect the Cable
The floodlight connects to the solar panel via a waterproof cable connector.
Diagram Description: Shows the connection of the floodlight cable to the solar panel assembly.
Step 4: Wall Mounting and Placement
Mount the fixture to a wall. The recommended mounting height for optimal performance is 2-4 meters for the 10W model and 2-5 meters for the 30W model.
Diagram Description: Depicts the floodlight mounted on a wall, with visual indicators for recommended mounting heights for both 10W and 30W models.
Operation and Modes
The floodlight features motion and light sensors, with adjustable modes for operation.
Sensor Activation
The sensor has a 120° detection angle [?️?️]. The detection range is 6 meters for the 10W model and 8 meters for the 30W model. The light activates when ambient light levels are below 20 lux [?] and turns off when above 40 lux [☀️].
Diagram Description: Shows the sensor's detection angle and range, and the LUX thresholds for activation and deactivation.
Operating Modes
The floodlight offers two primary operating modes, selectable via controls on the unit.
Mode 1 (Timed Operation with Dimming)
This mode allows for timed illumination with dimming options. Users can select durations of 3 hours [3h], 5 hours [5h], or 8 hours [8h]. Brightness can be set to 60%, 45%, or 30% for these durations, or 100%, 60%, 5% respectively. The unit has a memory function [?] to retain the last setting.
Diagram Description: Illustrates Mode 1 settings with icons representing time durations and brightness levels. Shows the memory function indicator.
Mode 2 (Timed Operation with Adjustable Brightness)
This mode also offers timed illumination for 3 hours [3h], 5 hours [5h], or 8 hours [8h], with brightness levels set at 100%, 60%, and 5% respectively. Dimming can be adjusted using '+' and '-' buttons [➕/➖], with a minimum brightness of 15% and a maximum of 60%.
Diagram Description: Illustrates Mode 2 settings with time durations and brightness levels. Shows the dimming control buttons and their range limits.
ON/OFF and Test Function
The unit has an ON/OFF switch [▶️/⏹️] and a TEST function button for initial setup and verification.
Diagram Description: Shows the ON/OFF switch and the TEST button on the back of the floodlight.
Battery Information
Details on the batteries required for the remote control and the unit itself.
Remote Control Battery
For the 10W model, the remote control requires 1x 3V Lithium Metal battery (CR2025) [?].
Floodlight Power Source
For the 30W model, the floodlight unit requires 2x 3.7V Lithium Ion batteries (18650) [??] or 2x 3.2V Lithium Iron phosphate batteries (32700) [??].
Diagram Description: Shows the battery compartments and types for both 10W and 30W models.
Indicator Lights
The floodlight features indicator lights to show its status:
- Green [?]: Indicates normal operation or charging.
- Blue [?]: May indicate a specific mode or status.
- OFF [⚫]: Unit is off or in standby.
- Red [?]: Indicates an error or low battery status.
Diagram Description: Shows colored indicator lights and their corresponding states.
Compliance and Recycling
The product complies with relevant standards and is designed for responsible disposal.
- CE, UKCA, EAC certifications
- IP65 rating (dust and water protection)
- Recycling information: "Cet appareil, ses accessoires et ses piles se recyclent. À DÉPOSER EN MAGASIN OU EN DÉCHÈTERIE." (This device, its accessories and batteries are recyclable. To be deposited in stores or recycling centers.)
- Collection points available at www.quefairedemesdechets.fr
Manufacturer: LEDVANCE GmbH, Steinerne Furt 62, 86167 Augsburg, Germany
Website: www.ledvance.com
Document Reference: C10449057, G11186025, Date: 25.01.2024
