lubluelu Quick Installation Guide

Remove the protective strips.

Install the side brushes. Press the left brush (L) and the right brush (R) respectively into corresponding holes until the [click] sound is heard.

Connect the adapter to the charging base and arrange the power cable properly.

Place the charging base in proper position and power on for charging. Ensure clearance of at least 0.5m on the sides and 1.5m in front.

Do not move the charging base arbitrarily and keep it away from [no direct sunlight].

Power-On and Charging. Press and hold the [power button] to power on. When the indicator is illuminated, place the robot on the base for charging. The voice prompt of "Start Charging" indicates successful charging.

Activate the [Wi-Fi symbol] on your phone to connect to a 2.4Ghz network.

Download App: Search "Smart Life" in the [App Store] or [Google Play], or scan the [QR code].

Registration: Open the "Smart Life" APP and complete the registration process.

Log in to the APP and tap the "Add Device" or [+] button.

Navigate to "Small Home Appliances" and select "Robot Vacuum (Wi-Fi)".

Enter your 2.4GHz Wi-Fi network password and tap "Next".

Connect your mobile phone to the device's hotspot, typically named SmartLife-XXXX.

Follow the on-screen instructions. Power on the device and long-press the relevant button(s) until the indicator light starts blinking ([blinking indicator]). Then, tap "Confirm the Indicator is Blinking". The document mentions two modes: EZ Mode and AP Mode. For AP mode, press both the Power + Charge buttons for 3 seconds.

Select "AP Mode" if prompted.

Tap "Go to Connect".

On your phone's Wi-Fi settings, select the SmartLife-XXXX network and return to the app.

Wait for the connection process to complete.

The device is added successfully. Tap "Done" to finish and access the app.