Robot Vacuum Cleaner

Safety Warnings

Application Restrictions

• This machine is used for indoor cleaning only. Do not use the machine outdoors (such as open balcony), on non-floors (such as sofa) or in commercial or industrial places.
• Do not use the machine in the place of cliff without protective rails (such as duplex floors, open balcony, furniture top).
• Do not use the machine in temperatures above 104°F or below 32°F, or on the ground with any liquids and viscous substances.
• Please hang up wires on the ground indoors before use to avoid entanglement during cleaning.
• Please remove fragile items and debris (such as vases, plastic bags, etc.) from the ground to avoid valuables being damaged due to obstacles or minor collisions.
• Individuals with physical, mental, or perceptual impairments, including children, are prohibited from using or operating the machine.
• This machine should not be used as a toy by children. Keep children and pets away when the machine is working.
• Place the cleaning brush beyond the reach of children.
• Do not place any objects (including children or pets) on the stationary or moving machine.
• Do not keep any parts of human body or pets (such as hair and fingers) close to the suction port during cleaning.
• Do not use the machine to clean burning objects (such as unquenched cigarette butts).
• Do not use the machine to clean plush carpets (some dark carpets may not be cleaned properly).
• Do not use the machine to clean hard or sharp objects (such as decoration wastes, glass, iron nails, etc.).
• Do not use the bumper as a handle.
• Please cut off the power before cleaning or maintaining the machine or the charging base.
• Do not wipe any parts of the machine with a damp cloth or any liquid.
• Please strictly abide by the operation instructions. Any losses or injuries caused by improper operation shall be borne by the user.
• Do not activate the mop function on carpets or on top of furniture.
• Please remove the water tank during charging.

Battery and Charging

• Do not use batteries, charging bases, or chargers produced by third parties.
• Do not disassemble, repair, or modify the battery or charging base without authorization.
• Do not keep the charging base close to heat sources (such as radiators).
• Do not wipe or clean the spring contacts of the charging base with a damp cloth or wet hands.
• Do not discard used batteries arbitrarily. Used batteries should be handed over to a professional recycling agency for proper disposal.
• Do not use the machine if the power cord is broken or damaged; purchase a new power cord through official channels.
• Please power off the machine during transportation. Transporting the machine in its original package is recommended.
• If the machine will not be used for a long time, power it off after being fully charged, store it in a cool and dry place. Charge the battery at least every three months to avoid battery failure due to excessive discharging.

Introduction

Packing List

• Machine
• Charging Base
• 2-in-1 Dustbin & Water Tank
• Side Brush
• Mop Holder
• Mop
• Adapter
• Cleaning Brush

Machine Overview

WIFI Indicator: Light OFF: Offline; Light Flash: Connecting; Light ON: Online.

Power/Clean/Pause Button: Short press to start/pause cleaning. Press and hold for 3 seconds to Power ON/OFF.

Recharge Button: Short press to start recharging.

System Reset: Insert a pin to trigger the switch to reset the system.

Sensor and Structure

Top View Components: Button, Laser radar, Infrared Bumper Sensor, Infrared receiving sensor.

Bottom View Components: Cliff sensor, Charging Contacts, Omni Wheel, Side Brush, Battery cover, Driving Wheel, Rolling Brush, 2-in-1 Dustbin & Water Tank.

2-in-1 Dustbin & Water Tank Details

Components include: High-efficiency filter cover, Dustbin Button, HEPA Filter, Filter Sponge, Primary filter, Tank Cover.

Charging Base Details

Components include: Power Indicator, Signal Transmission, DC IN, Charging contact poles.

Installation and APP Connection

Notices

Before starting: Clear wires, debris, fragile, unstable, valuable, and potentially dangerous objects from the ground. Avoid entanglement, jamming, dragging, or bumping of equipment.

Usage Restrictions: Do not use the robot to clean liquid. When used near edges or on suspended surfaces, ensure protection (e.g., rails) to prevent accidental falling or pushing objects.

Setting up the Charging Base

1. Remove protective strips from the robot.
2. Install side brushes (L and R) until they click.
3. Connect the adapter to the charging base and manage the power cable.
4. Place the charging base against a wall on a flat surface. Ensure at least 0.5m clearance on both sides and 1.5m in front. The charging indicator will illuminate when powered on.
5. Do not move the charging base arbitrarily and keep it away from direct sunlight.

Power-On and Charging

Press and hold the power button to turn on. When the indicator is lit, place the robot on the charging base. A voice prompt "Start Charging" confirms successful charging. If the battery is critically low, the robot will automatically power on when placed on the base.

Installing the Mopping Module

1. Add water to the water tank (do not add cleaning agents) and screw the cover tightly.
2. Install the 2-in-1 dustbin & water tank into the machine.
3. Install the mop to the holder.
4. Attach the holder to the bottom of the 2-in-1 dustbin & water tank.

Note: Do not use the mopping function on carpets to avoid wetting them. Use Restricted Zone or Selected Zone features in the app to avoid carpeted areas.

Connecting to the Smart Life App (Quick Connection)

1. Activate Bluetooth and connect your phone to a 2.4 GHz Wi-Fi network (avoid 5GHz).
2. Download and install the "Smart Life" app from Appstore or Google Play, or scan the QR code.
3. Open the app, agree to the User Agreement and Privacy Policy, and register an account.
4. Turn on the robot vacuum. Press and hold the "OFF/ON" and "Home" buttons simultaneously for at least 3 seconds until the Wi-Fi indicator flashes.
5. In the "Smart Life" app, tap "Add Device" to add your robot vacuum.
6. Allow the app necessary permissions (e.g., Location) for device discovery and automation. Tap 'Add' when the device is discovered (this may take 8-10 seconds).
7. Enter your Wi-Fi password and click "Next".
8. Wait for the auto-connecting process (1-2 minutes).
9. Click "Done" to log in to the app's operation page.

Connecting to the Smart Life App (Slow Connection)

1. Activate Wi-Fi on your phone and connect to a 2.4GHz network.
2. Download the "Smart Life" app from Appstore or scan the QR code.
3. Open the app and complete the registration.
4. Log in to the app and tap the "Add Device" or "+" button.
5. Select "Small Home Appliances" and then "Robot Vacuum (Wi-Fi)".
6. Enter the Wi-Fi password and click "Next".
7. Press and hold both "Power + Charge" buttons for 3 seconds. The indicator light will flash, indicating network distribution has started.
8. Click "Confirm the Indicator is Blinking".
9. Select "AP Mode".
10. Click "Next".
11. Connect your mobile phone to the device's hotspot (e.g., "SMATR LIFE XXX").
12. Wait for the connection to establish.
13. Click "Done" to log in to the app.

Use Instructions

Power ON/OFF

Press and hold the power button for 3 seconds until the indicator illuminates (powered on). Press and hold for 3 seconds in standby mode until the indicator turns off (powered off). The machine cannot be powered off while charging.

Charging

Auto Mode: The robot automatically returns to the charging base after cleaning.

Manual Mode: In PAUSE state, short press the power button, or use the remote control/APP to start recharging.

Note: If the robot cannot find the charging base, it will return to its starting position. Manually place it on the charging base.

Clean/Pause

After powering on, short press the power button, or use the remote control or APP to start cleaning.

Notes:

• Do not clean liquids.
• The machine requires at least 15% battery to start cleaning. Charge if below this level.
• If the battery drops below 15% during cleaning, the robot will automatically return to the base to charge.
• Clear wires (including the charging base power cord) before cleaning to prevent entanglement and potential damage.

Function Module

Smart Clean (Default)

1. Before first use, the Robot Vacuum scans the environment and generates a map with smart area divisions.

2. Based on the map, the robot cleans edges, forms a closed area, then cleans the remaining areas in a Z-shaped pattern.

3. After cleaning, the robot returns to the charging base.

Notes: For better map generation, start from the charging base. Do not arbitrarily move the robot during operation, as it may attempt to reposition, potentially abandoning the task if unsuccessful.

Targeted Clean

1. Select "Press to run" in the APP.

2. Select a point on the map and tap "Go Here" to start cleaning.

3. The robot cleans a 1.6m x 1.6m area around the selected point twice before returning to charge.

Note: The map must be generated in the APP before use.

Designated Clean

1. Select the cleaning function for a specific area in the APP.

2. Select the area on the map and tap "Select Room".

3. The Robot Vacuum cleans the designated area.

Notes: Clear obstacles around the designated area. The map must be generated in the APP before use.

Customized Clean

Select "Area Sweep" in the APP, tap "+ cleaning area", select an area on the map, and tap "Go Here". The robot will clean the customized area.

Notes: Clear obstacles around the designated area. The map must be generated in the APP before use.

Restricted Area Setting

Select "Forbidden Edit" in the APP, set restricted areas on the map (e.g., Mop & sweep or Mop forbid area), save settings, and the robot will avoid these areas.

Notes: The map must be generated in the APP before use. Restricted areas should not be too close to the charging base. Moving the robot or significant environmental changes may invalidate the map and restricted areas.

Maintenance

Rolling Brush Cleaning

Recommended every 1-2 weeks. Turn the machine over, press the buckle to remove the brush lid, remove the rolling brush, and clean it with the provided tool. Remove entangled debris.

Side Brush Cleaning

Recommended weekly. Turn the machine over, pull out the side brush vertically. Remove entangled hairs and dirt, then reinstall. Press left (L) and right (R) brushes into corresponding holes.

Note: Replace side brushes every 3-6 months if deformed for optimal cleaning.

Dustbin and Filter Cleaning

Recommended every 2-3 days for dustbin/filter, weekly for dustbin.

1. Pull out the dustbin. 2. Open the dustbin and clean with a brush or rag. If too dirty, wash with water and dry thoroughly.

1. Clean the filter: Remove filter sponge and HEPA filter. Tap HEPA filter to remove dust.

Notes: Do not use detergent when washing. Ensure parts are thoroughly dry. Replace HEPA filter every 3-6 months.

Sensor Cleaning

Clean infrared bumper sensor and Cliff sensor monthly.

Charging Contacts Cleaning

Clean charging contacts monthly.

Signal Transmitting Area Cleaning

Clean signal transmitting area monthly.

Battery Care

The robot uses a rechargeable lithium-ion battery. Keep it fully charged for optimal performance. If not used for a long time, power off and charge every three months to prevent battery failure.

Firmware Upgrading

Firmware can be upgraded via the APP. Ensure the battery is more than half charged; upgrading on the charging base is recommended.

Malfunctions and Troubleshooting

Machine Issues

Voice Prompts and Solutions

The robot vacuum supports five languages for voice prompts: English (default), German, French, Italian, Spanish. Select language via the "SMART LIFE" app: "Setting" -> "Voice and volume".

SIMPLIFIED EU DECLARATION OF CONFORMITY

Shenzhen XinCheng Innovation Technology Co., Ltd declares that the radio equipment type Robot Vacuum Cleaner complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: https://files.innpro.pl/Lubluelu

Manufacturer's address: ShenzhenShi LongGangQu, BanTianJieDao, MaAnTangSheQu, HuanChengNanLu 17 Hao, HengDa DuHui Guang Chang 1 Dong 2809

Radio frequency: [Not specified]

Maximum radio frequency power: [Not specified]

Customer Service

Please contact us for assistance with:

• Technical Support
• Package not in perfect condition
• Parts missing
• Other quality issues

If problems occur, check the bottom of the robot.

EC REP: CET PRODUCT SERVICE SP. Z O.O., 33 Dluga Street, Apt. 102 Zgierz Łódzkie PL(Poland). Email: info@cetproduct.com

UK REP: GSG CONSULTING GROUP LIMITED, Montague houses unit 3 Matthew street Manchester m12 5bb. Email: GSG--GROUP@outlook.com

Made in China.