S10 Bone Conduction Wireless Headphones

Key Function Overview

The S10 headphones are bone conduction wireless headphones designed for a healthy and comfortable listening experience, allowing users to enjoy music while remaining aware of their surroundings.

Description of Controls

• Power On: Long press the on/off button for 2 seconds. A beep indicates power on.
• Shutdown: Long press the on/off button for 3 seconds. A beep indicates power off.
• Connect BT: Power on the device to enter pairing status (Bluetooth LED blinks). Search for "S10 (Bluetooth)" on your phone, computer, or laptop and manually connect.
• Pairing Successful: Upon powering on, the headset automatically enters Bluetooth search mode. For the first connection, manual pairing is required. A beep confirms connection.
• Disconnect Bluetooth: Disconnect via your phone's Bluetooth settings.
• Pause/Play: Click the power on button during Bluetooth connection or music playback.
• Answer/hang up/reject: During an incoming call, long press the on button for 2 seconds to reject. During a call, click the on button to hang up.
• Volume up: In music or call mode, click the "+" button to increase volume.
• Volume Down: In music mode, press and hold the "-" button for 2 seconds to play the previous song.
• Next song: In music mode, press and hold the "+" button for 2 seconds to play the next song.
• Previous song: In music mode, press and hold the "-" button for 2 seconds to play the previous song.
• Voice assistant: After connecting Bluetooth (without making a call), continuously press the power button 3 times to enter voice mode, and press 3 times again to exit. (Note: For Siri/Android, ensure the "Bluetooth headset button start" option is enabled in the voice assistant settings. For iOS, disable background app refresh for Siri.)

MP3 Function

1. In any state, double-click the power button to switch between Bluetooth mode and MP3 mode. A beep confirms the switch.
2. During Bluetooth playback, double-click the "power on" button to switch to MP3 mode. The MP3 mode screen will flash, and a tone will indicate successful switching.
3. During MP3 mode playback, double-click the "power on" button to switch to Bluetooth playback. A Bluetooth mode tone will accompany the switch.
4. The MP3 function supports only MP3/WAV music formats.

Charging

1. When charging with a 5V charging cradle, the headset will turn off and cannot be turned on. The last digit of the percentage display will flash.
2. When charging is complete, the display will show 100%.

Charger and Battery

Before charging, verify the charger specifications meet the requirements: recommended output voltage DC5V +/-0.25V, output current 100mA-500mA. Excessive voltage can damage the headset.

Warning: Use only approved chargers. Using unapproved chargers may void the warranty and pose risks. If a charging cable was included, connect through a 3C certified charger or computer. Avoid severe impact or collision, which can damage the internal components.

Charging the battery

The headset has a built-in, non-removable rechargeable battery. Do not attempt to remove it. For long-term storage, keep the headset in a dry, ventilated place and charge it every two months.

1. When the headset battery level is 10% or less, a low battery tone will sound, indicating the need to charge. The headset will automatically shut down if used further.
2. Plug the charger into an AC power outlet.

Wearing Instructions

Product Specifications

• Music playback time: 8 hours (standard state)
• Standby time: 10 days
• Charging time: 2.5 hours
• BT version: 5.4
• Speaker impedance: 8Ω±3db
• Microphone sensitivity: -42±2db
• Product weight: 30g
• TF card capacity: 32G

Important Notes

• Ensure correct placement of speakers on the cheekbones in front of the ears, not inside the ear canal.
• Listening at high volumes for extended periods can cause discomfort. Use medium volume levels when possible.
• Be aware that headphones can affect your perception of surrounding sounds. Pay attention to your environment.
• Do not throw, sit on, or immerse the headset in water. Keep away from fire and high voltage equipment.
• Not suitable for children under three years old due to small parts.
• Dispose of the product responsibly by taking it to an appropriate electronic waste recycling facility.
• The company is not liable for personal injury or property damage resulting from misuse or violation of these warnings.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modifications may void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, interference is not guaranteed in all installations.

If this equipment causes harmful interference to radio or television reception, users are encouraged to try correcting the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.