S10 Bluetooth Earphones Product Specification

Function Operation Description

1. Boot: Take the earphone out of the charging bin and it will start automatically, or press the left and right earphone multi-function button for 3 seconds to start.
2. Turn Off: Put the earphone into the charging bin to automatically shut down, or long press the left and right earphone multi-function button for 5 seconds to shut down.
3. Start and Reconnect: After pairing is successful, the Bluetooth headset will preferentially enter the connection state and automatically return when turned on for the second time to connect to an already connected cell phone.
4. Play/Pause: In the standby state, click the left and right multi-function keys of the headset to play music directly. Click the left and right headset multi-function keys to pause playback.
5. Switch Songs: When playing music, click the multi-function key of the earphone three times to switch up and down.
6. Volume Increase and Decrease: Double-click the left and right multi-function buttons to increase and decrease the volume.
7. Answer Incoming Calls: When a mobile phone call comes in, click the left and right multi-function keys of the headset to answer the call.
8. Hang Up Call: During a phone conversation, hang up the phone by clicking the left and right multi-function keys of the headset.
9. Call Rejection: When a phone call comes in, long press the left and right multi-function buttons of the earphone for 2 seconds to reject the call.
10. Activate Voice Assistant: Hold down the headset multifunction button for 3 seconds to activate Siri or Google's Voice Assistant to control phone operations.

Pairing

1. Take the earphones out of the charging bin or press the left and right multi-function button for 3 seconds to start automatic pairing.
2. Activate Bluetooth on your phone or other device and tap to enter pairing.
3. The two earphones can also be paired with a mobile phone. For details, go to Step 2 Operation Method Perform operations.

Charging Operation

1. Connect one end of the Micro USB charging cable to the USB port of the charging box and the other end to the charger. Charge the charging box. The white indicator light flashes at an interval of 2 seconds until the electric range of the indicator light is full. The indicator that enters the next power range blinks. After the battery is fully charged, all indicators are on.
2. Charge the earphone: Put the earphone into the charging bin to charge the earphone automatically. The light is red and goes off when it is fully charged. The blue indicator light of the charging bin keeps on. When the charging bin is fully charged, the four electric quantity indicators are all on. When the electric quantity of the charging bin decreases to the corresponding electric quantity, the corresponding indicator blinks. When the headset is fully charged, the blue indicator lights in the charging bin are all off.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.