NZXT T120 & T120RGB CPU Air Cooler Installation and Warranty Guide

1. Component List

Ensure all components are present before installation:

• A. Heatsink (T120 / T120RGB) - Quantity: 1
• B. F Series - Static Pressure Fan (T120) - Quantity: 1
• C. F Series - RGB Fan (T120RGB) - Quantity: 1
• D. Fan Clip (T120 & T120RGB) - Quantity: 4
• E. Intel Backplate - LGA 1700 - Quantity: 1
• F. Intel Backplate - LGA 1200/115X - Quantity: 1
• G. Intel Retention Brackets (Pre-installed) - Quantity: 2
• H. AMD Retention Brackets - Quantity: 2
• I. Countersunk Screws (Pre-installed) - Quantity: 2
• J. AMD Sleeves - Quantity: 4
• K. #6-32 Screws for AMD - Quantity: 4
• L. NZXT High-Performance Thermal Paste 1g (T120RGB) - Quantity: 1
• M. 200mm 5V ARGB (Female) to NZXT RGB (Male) Adapter (T120RGB) - Quantity: 1

2. Installation Guide

Follow these steps for proper installation:

Step 1: Prepare Motherboard

For Intel: Install the appropriate Intel backplate (E for LGA 1700, F for LGA 1200/115X) on the rear of the motherboard.

For AMD: Remove the stock AMD mounting bracket. Retain the original motherboard backplate.

Step 2: Install Retention Brackets

For Intel: Attach the Intel retention brackets (G) to the heatsink. Ensure they align with the socket type (LGA 1700 or 1200/115X).

For AMD: Install the AMD retention brackets (H) onto the heatsink and secure them using the countersunk screws (I).

Step 3: Prepare CPU

Carefully peel off the protective sticker from the CPU contact surface of the heatsink.

Step 4: Apply Thermal Paste

Apply a small amount of NZXT High-Performance Thermal Paste (L) onto the center of the CPU.

Step 5: Mount the Heatsink

For Intel: Place the heatsink onto the CPU, aligning the bracket screws with the motherboard's backplate holes. Secure the screws in the indicated order (e.g., cross pattern).

For AMD: Install the four AMD sleeves (J). Place the heatsink onto the CPU, aligning with the motherboard. Secure it using the #6-32 screws (K) in the indicated order (e.g., cross pattern).

Step 6: Attach Fan

Secure the fan (B or C) to the heatsink using the fan clips (D).

Step 7: Connect Fan Cable

Connect the 4-pin PWM fan cable to an available fan header on your motherboard or fan controller.

Step 8: Connect RGB Lighting (T120RGB Only)

For RGB lighting control on the T120RGB model:

• Connect the 4-pin NZXT RGB Cable (C) to an NZXT RGB lighting channel on your motherboard (Option 1) or a lighting controller (Option 2).
• Alternatively, use the 200mm 5V ARGB to NZXT RGB Adapter (M) to connect to a 5V ARGB header (Option 3).

WARNING: Do not connect the RGB cable to 12V RGB headers on motherboards.

3. Downloading NZXT CAM Software

To enable control and customization of your RGB fans, download and install the NZXT CAM software from nzxt.com/software/cam.

4. Appendix

3.1 NZXT Global Warranty Policy

This policy outlines the terms and conditions for NZXT product warranties.

Warranty Length

New NZXT Products: Typically 2 years for most components (Fans, Lighting Accessories, Air Coolers), 3 years for Motherboards, 4 years for Kraken X/Z Coolers, and 6-10 years for Power Supplies.

Refurbished NZXT Products: 1 year for all certified refurbished products.

What is Covered and What is Not

NZXT will repair or replace products that malfunction due to manufacturing defects within the warranty period. The warranty does NOT cover:

• Product modifications without NZXT permission.
• Damage not resulting from manufacturing defects.
• Damage from accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature.
• Failure to follow product instructions.
• Improper installation, unauthorized alterations, or repairs by unauthorized personnel.
• Shipping or transport damage (claims must be made with the carrier).
• Normal wear and tear.

Exclusion of Damages

NZXT is not liable for incidental or consequential damages, including loss of data, business interruption, or tort liability related to product use.

Obtaining Technical Support

For assistance, reference the owner's manual, or contact NZXT via phone at +1 (800) 228-9395, email at service@nzxt.com, or visit the support site at nzxt.com/customer-support.

Obtaining Warranty Service

Submit a request via the NZXT Support site. Proof of purchase is required. Upon approval, you will receive an RMA number to mark on the return package.

Consumer Rights

This warranty provides specific legal rights, which are in addition to consumer protection laws in your region. For UK consumers, rights include refunds within 30 days for faulty goods, and longer-term rights for goods not lasting a reasonable time. For EU consumers, additional protections apply based on habitual residence.

3.2 Support and Service

For questions or problems with NZXT products, contact the support system at support.nzxt.com. Include a detailed problem description and proof of purchase. For comments and suggestions, email the design team at designer@nzxt.com. Visit NZXT.com for more information.

Multilingual support contact information is provided for various regions.

3.3 Regulations

This lighting kit complies with FCC standards, Australian standards, and the EU EMC Directive (2014/30/EU).

WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received.

3.4 Revision History

Version 1.0, dated 2022/07/29.