Nedis WIFICO20CWT Outdoor IP Camera
Quick Start Guide
Product Description
The Nedis WIFICO20CWT is an outdoor IP camera.
Key Components:
- 1. Status indicator: Shows the operational status of the camera.
- 2. Reset button: Used to reset the device to factory settings.
- 3. Speaker: For audio output.
- 4. Microphone: For audio input.
Diagram Description: The camera unit is shown from the front and side. Key components are indicated by numbers: 1. Status indicator, 2. Reset button, 3. Speaker, 4. Microphone.
Getting Started (Use)
- Download and install the "Nedis SmartLife" app from the Apple App Store or Google Play Store on your mobile device.
- Launch the "Nedis SmartLife" app.
- Create a new account or log in to your existing account.
- Tap "+" to add the device.
- Select "Security Camera" from the list of products.
- Connect the power adapter to the device. Insert the mains plug of the power adapter into the wall socket.
- If the status indicator does not flash: Press the reset button. If the status indicator flashes: Confirm in the app.
- Confirm the Wi-Fi network and password.
- Enter the device name. (Note: The device name will also be used for push notifications.)
- Use the metal bracket to mount the camera on the wall or in an angle.
- Place the camera on the bracket and rotate to fixate.
Safety Information
[Caution Symbol: Risk of Electric Shock, Do Not Open]
[Disconnect Symbol] Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
Cleaning and Maintenance
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support