Nedis WIFICO11xxx Outdoor IP Camera

Product Description

This document provides a quick start guide for the Nedis WIFICO11xxx Outdoor IP Camera.

Key Components:

• 1. Status indicator
• 2. Reset button
• 3. Speaker
• 4. Microphone
• 5. Memory card slot (microSD)

Getting Started

1. Download and install the "Nedis SmartLife" app from the Apple App Store or Google Play Store on your mobile device.
2. Launch the "Nedis SmartLife" app.
3. Create a new account or log in to your existing account.
4. Tap " + " to add the device.
5. Select "Security Camera" from the list of products.
6. Connect the power adapter to the device and plug it into a wall socket.
7. If the status indicator does not flash, press the reset button. If it flashes, confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter a device name. (Note: This name is also used for push notifications.)
10. Mount the camera to the desired location using the provided screws.
11. Optionally, drill a 14 mm hole to pass the cable through the wall.
12. Adjust the camera angle by aiming and rotating it as necessary.

Safety Precautions

CAUTION

• To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a problem occurs.
• Read the manual carefully before use and keep it for future reference.
• Use the device only for its intended purposes as described in the manual.
• Do not use the device if any part is damaged or defective. Replace it immediately if damaged or defective.

Cleaning and Maintenance

Warning!

• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. Replace it with a new device if it does not operate correctly.
• Clean the outside of the device using a soft, damp cloth.

Support

For further assistance, comments, or suggestions, please visit www.nedis.com/support.