Specifications of Zigbee Solar Version Soil Sensor
The image displays a Zigbee Solar Version Soil Sensor. It is a cylindrical device with a domed top, mounted on three pointed legs designed to be inserted into the soil.
Product Specifications
- Product name:
- Zigbee Solar Version Soil Sensor (temperature, moisture and Electrical Conductivity detection)
- Product Size:
- 86mm*86mm *146mm
- Product Weight:
- 120g (battery not included)
- Power Supply:
- 3pcs 1.2V AA Ni-MH battery (rechargeable through solar panel)
- Solar Charging Current:
- 35mA
- Wireless Protocol:
- Zigbee IEEE 802.15.4
- Wireless distance:
- 50m
- Waterproof level:
- IP66
- Temperature detection range:
- -10~60°C (14°F~140°F)
- Moisture detection range:
- 0~100%RH (Non-Condensing)
- Maximum detection range of Electrical Conductivity:
- 20ms/cm
- Temperature Detection Accuracy:
- 0.5°C (Adjustable)
- Moisture Detection Accuracy:
- 5%RH (adjustable)
- Electrical Conductivity Detection Accuracy:
- 3%FS, 0.01ms/cm
- Time span of detection:
- 10min (adjustable)
- Working temperature:
- -10~60°C (14~140°F)
- Working humidity:
- 0~100%RH (Non-Condensing)
- Frequency:
- 2.4GHz
- Communication Protocol:
- Zigbee 3.0
Indicator and corresponding device status
| Device Status | LED State |
|---|---|
| Mode of waiting for configuration | LED flashes quickly (2 times per second) |
| Reset | Press the reset key and hold it for 7 seconds. During holding the reset key, the LED state keeps on. Once the LED flashes, it means soil sensor has been reset successfully. |
Function Features
- Support Zigbee 3.0 protocol, low consumption, the maximum range can reach 50m for wireless connection.
- Support battery charged through solar power.
- Support detecting soil's temperature, moisture, and Electrical Conductivity.
- Support iOS and Android system and free App.
- Support to set the sensitivity of soil's moisture and temperature, in order to adjust the variation range of soil's moisture and soil temperature.
- Support to set the time span of detection, in order to adjust the count of report.
- Support to switch between Fahrenheit and Celsius degrees.
- Support to check history record via curve chart.
- Support multi-account sharing, in order to adjust the device and receive notifications.
- Support scene linkage with other devices.
