Ninja BL642Z Owner's Guide

Important Safety Instructions

For Household Use Only

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions before using your Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology.

To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.

Do not allow the appliance to be used by children. Close attention is necessary when used near children. This is not a toy.

Never leave an appliance unattended when in use.

Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

Do not abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.

Do not let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.

Always use appliance on a dry, level surface.

Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.

Avoid contact with moving parts.

Do not attempt to sharpen blades.

Do not use the appliance if blade assemblies are bent or damaged.

To reduce risk of injury, never place the blade assemblies on the base without the pitcher or Nutri Ninja cup properly attached.

Do not operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).

The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.

Do not remove the container from the motor base while the appliance is in operation.

To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

Do not expose containers to extreme temperature changes.

Do not overfill.

Do not operate the appliance empty.

To reduce the risk of burns, always allow the appliance to cool before taking off parts and before cleaning.

In the event that the unit overloads, the control panel lights will flash and the unit will shut down. Unplug the appliance and let it cool down for approximately 15 minutes before using again.

This product is intended for household use only. Do not use this appliance for anything other than its intended use. Do not use outdoors.

The maximum rating is based on the Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw significantly less power or current.

Save These Instructions

Technical Specifications

Getting To Know Your Nutri Ninja® | Ninja® Blender Duo™ with AUTO-IQ™ Technology

The Nutri Ninja® | Ninja® Blender Duo™ with AUTO-IQ™ Technology is a professional, high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. It features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Features:

• Ninja Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups and Lids
• Drip-Free Pour Spout
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low, Medium, & High
• 5 AUTO-IQ Programs - AUTO-IQ Frozen Drinks/Smoothies, AUTO-IQ Puree, Nutri Ninja AUTO-IQ Blend, Nutri Ninja AUTO-IQ Ultra Blend and AUTO-IQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
• * Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies

Components:

The system includes:

• Jumbo Multi-Serve 32 oz. Nutri Ninja® Cup
• Regular 24 oz. Nutri Ninja® Cup (x2)
• Pro Extractor Blades® Assembly
• Sip & Seal® Lids (x3)
• Pitcher
• Pitcher Lid with Locking Handle
• Stacked Blade Assembly
• Motor Base
• Power Cord (not shown)

NOTE: Blade assemblies are not interchangeable.

Before First Use & Assembly

1. Remove all packaging material and labels from the appliance. Separate/remove all parts from each other.
2. Wash the lids, pitcher, Nutri Ninja® cups and Blade Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

3. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
4. The pitcher, Nutri Ninja cups, lids, and blade assemblies, are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.
5. Wipe the motor base clean with a damp cloth.

Assembly and Use of the Pitcher

It's best to add the liquid ingredients first and then the dry ingredients.

1. Review warning and caution statements above before proceeding to number 2.
2. Place the motor base on a clean, dry, level surface such as a counter or table top. Press down on the motor base to make sure that the Suction Cups adhere to the counter or table top.
3. Align and lower the Pitcher onto the motor base. The handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
4. Rotate the pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base.
5. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
6. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright. NOTE: The Stacked Blade Assembly will fit loosely on the drive gear.
7. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher. NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening. NOTE: When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the “MAX” liquid mark (1.9 L) on the Pitcher.
8. Holding the lid by the handle in the upright position, place it on top of the Pitcher aligning the triangle (✔) located on the lid with the triangle (▲) located on the Pitcher’s handle. Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. IMPORTANT: As a safety feature, the power light (⏻) will flash and the motor will not work if the Pitcher and lid are not installed correctly. When the Pitcher and lid are installed properly, the power light (⏻) will be solid, indicating that the appliance is ready for use.
9. Plug the power cord into the electrical outlet and press the power button (⏻).

Use of the Pitcher

1. Review warning and caution statements on page 8 before proceeding. NOTE: Nutri Ninja® | Ninja® Blender Duo™ with AUTO-IQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base.
2. Press the power button to turn on the unit. Select the speed or AUTO-IQ™ Program that best suits your needs. The AUTO-IQ™ program will stop the appliance automatically at the end of the program.
3. To pause the appliance, press the selected speed or AUTO-IQ™ Program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.
4. When you have reached your desired consistency, stop the appliance by pressing the power button (⏻) and wait for the Stacked Blade Assembly to stop turning.

Removal of the Pitcher

1. Turn the pitcher counter clockwise to remove and then lift off the base.

15. Open the pour spout cap and use the spout to empty liquid contents.
16. For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher.
17. Make sure that the unit is unplugged when not in use.

Assembly and Use of the Nutri Ninja™ Cups

1. Review warning and caution statements above before proceeding to number 2.
2. Place the motor base on a clean, dry, level surface such as a counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.
3. Add ingredients to the Nutri Ninja cup.
4. Place the Pro Extractor Blades Assembly onto the cup and tightly screw it on clockwise until you have a good seal.
5. Turn the Nutri Ninja cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja cup clockwise until it locks in place, you will hear a click when the lock is engaged.
6. Press the power button on, and select the speed or AUTO-IQ program that suits your needs. The AUTO-IQ program will stop the appliance automatically at the end of the program.
7. To pause the appliance, press the selected speed or AUTO-IQ Program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.
8. Once you have reached your desired consistency, stop the appliance by pressing the power button and wait for the blade to stop turning. Turn the Nutri Ninja cup counter-clockwise and pull straight up to remove. NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max Liquid” line.
9. Turn the cup upright and remove the Pro Extractor Blades Assembly by twisting the blade assembly counter-clockwise.
10. Place the Sip & Seal® lid onto the Nutri Ninja cup, twist clockwise to seal and enjoy!
11. Make sure that the unit is unplugged when not in use.

Programs, Speed Settings & Uses

For the Pitcher

* When blending soups or sauces, make sure they're cooled to room temperature first - Ninja containers are not intended for hot blending.

For the Nutri Ninja® Cup

Care & Maintenance

How to Clean

1. Separate/remove all parts from each other.
2. Hand Washing: Wash the lids, pitcher, Nutri Ninja® cup, and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
3. Dishwasher: The containers, lids, blade assemblies and attachments are all dishwasher safe. The lids and blade assemblies are top rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.

3. Wipe the motor base clean with a damp cloth.

Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

How to Store

1. Store the Nutri Ninja® | Ninja® Blender Duo™ with AUTO-IQ™ Technology upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won't cause harm. Wrap the power cord around the cord wrap on the back of the motor base.

Resetting the Motor Thermostat

The Nutri Ninja | Ninja Blender Duo with AUTO-IQ Technology features a unique safety system which prevents damage to the unit's motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the container and ensure that no food is jamming the blade assemblies.
3. Allow the appliance to cool for approximately 15 minutes.
4. Re-install the container onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

One (1) Year Limited Warranty

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at their option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call customer care and product specialists at 1-877-646-5288 or visit their website www.ninjakitchen.com.

If the appliance is found to be defective in material or workmanship, SharkNinja Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja™ product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable SharkNinja Operating LLC to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

Replacement Parts

To order additional parts and attachments, please visit www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.