Ninja BL642W Blender Duo with Auto-iQ™ Technology Owner's Guide

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.

WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

Assembly

The assembly process involves placing the motor base on a clean, dry, level surface, ensuring suction cups adhere. The pitcher is then aligned onto the motor base, handle slightly to the right of the "LOCK" symbol, and rotated clockwise until it clicks into place. The pitcher can be positioned with the handle on the front right or front left corner. The stacked blade assembly is placed onto the drive gear inside the pitcher, ensuring it stands upright. Ingredients are added, with liquids first. The lid is then placed on top, aligning the triangle (✔) on the lid with the triangle (▲) on the pitcher's handle, and pressed down until it clicks. The power light will be solid when correctly assembled.

1. Review warning and caution statements above before proceeding.
2. Place the motor base on a clean, dry, level surface such as a counter or table top. Press down on the motor base to make sure that the Suction Cups adhere to the counter or table top.
3. Align and lower the Pitcher onto the motor base. Handle should be aligned slightly to the right of the "LOCK" symbol on the motor base.
4. Rotate the pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base.
5. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
6. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright. NOTE: The Stacked Blade Assembly will fit loosely on the drive gear.
7. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher. NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening. When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the "MAX" liquid mark (1.9 L) on the Pitcher.
8. Holding the lid by the handle in the upright position, place it on top of the Pitcher aligning the triangle (✔) located on the lid with the triangle (▲) located on the Pitcher's handle. Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. IMPORTANT: As a safety feature, the power light (?) will flash and the motor will not work if the Pitcher and lid are not installed correctly. When the Pitcher and lid are installed properly, the power light (?) will be solid, indicating that the appliance is ready for use.
9. Plug the power cord into the electrical outlet and press the power button (⏻).

Use and Removal of the Pitcher

The control panel lights will illuminate based on the jar placed on the motor base. To use, press the power button, then select a speed or Auto-iQ program. Auto-iQ programs stop automatically. Pulse ingredients by holding the Auto-iQ Pulse button. To pause, press the selected speed/program button again. To stop, press the power button and wait for blades to stop. To remove, turn the pitcher counter-clockwise and lift off the base.

WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

For removal, open the pour spout cap to empty liquids. For thicker consistencies, remove the lid by pressing the release button and pulling the handle up to a 90-degree angle. Then, carefully remove the Stacked Blade Assembly by the top of the shaft, placing it away from the work area. Finally, empty contents from the pitcher. Ensure the unit is unplugged when not in use. To release the motor base from the counter, place hands underneath both sides and gently pull up.

1. Review warning and caution statements.
2. NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology can sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base.
3. Press the power button to turn on the unit. Select the speed or Auto-iQ program that best suits your needs. The Auto-iQ program will stop the appliance automatically at the end of the program.
4. NOTE: Pulse ingredients for even chopping by holding the Auto-iQ Pulse button until your desired consistency is reached.
5. To pause the appliance, press the selected speed or Auto-iQ program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.
6. When you have reached your desired consistency, stop the appliance by pressing the power button (⏻) and wait for the blade to stop turning.
7. Turn the pitcher counter clockwise to remove and then lift off the base.
8. WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.
9. Open the pour spout cap and use the spout to empty liquid contents.
10. For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher.
11. Make sure that the unit is unplugged when not in use.
12. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Assembly and Use of the Nutri Ninja® Cups

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.

WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

Assembly and Use

The Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology senses which jar is on the motor base, illuminating available functions. To assemble, place the motor base on a clean, dry, level surface, ensuring suction cups adhere. Add ingredients to the Nutri Ninja cup, not exceeding the "Max Liquid" line. Place the Pro Extractor Blades onto the cup and screw it on tightly clockwise. Turn the cup upside down and place it onto the motor base, aligning tabs and rotating clockwise until it clicks. Press the power button, then select a speed or Auto-iQ program. Auto-iQ programs stop automatically. To pause, press the selected speed/program button again. To stop, press the power button and wait for blades to stop. To remove, turn the cup counter-clockwise and pull straight up. Turn the cup upright and remove the Pro Extractor Blades by twisting counter-clockwise. Place the Sip & Seal® lid onto the cup, twisting to seal. Ensure the motor base is unplugged when not in use. To release the motor base from the counter, place hands underneath both sides and gently pull up.

1. Review warning and caution statements.
2. Place the motor base on a clean, dry, level surface, ensuring suction cups adhere.
3. Add ingredients to the Nutri Ninja cup.
4. Place the Pro Extractor Blades onto the cup and tightly screw it on clockwise until you have a good seal.
5. Turn the Nutri Ninja cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja cup clockwise until it locks in place, you will hear a click when the lock is engaged.
6. Press the power button on, and select the speed or Auto-iQ program that suits your needs. The Auto-iQ program will stop the appliance automatically at the end of the program.
7. To pause the appliance, press the selected speed or Auto-iQ program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.
8. Once you have reached your desired consistency, stop the appliance by pressing the power button and wait for the blade to stop turning. Turn the Nutri Ninja cup counter-clockwise and pull straight up to remove.
9. NOTE: Do not overfill! To avoid spilling, do not add ingredients past the "Max Liquid" line.
10. Turn the cup upright and remove the Pro Extractor Blades by twisting the Pro Extractor Blades counter clockwise.
11. Place the Sip & Seal® lid onto the Nutri Ninja cup, twist to seal and enjoy!
12. Make sure that the motor base is unplugged when not in use.
13. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Programs, Speed Settings & Uses for the Pitcher

* When blending soups, make sure they're cooled to room temperature first - Ninja® containers are not intended for hot blending.

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

Care & Maintenance

How to Clean

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any blade assembly and before cleaning.

CAUTION: DO NOT immerse the motor base into water or any other liquid.

1. Separate/remove all parts from each other.
2. Hand Washing: Wash the lids, pitcher, Nutri Ninja® cup, and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
3. Dishwasher: The containers, lids, blade assemblies and attachments are all dishwasher safe. The lids and blade assemblies are top rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.
4. WARNING: Handle the Stacked Blade Assembly, and Pro Extractor Blades Assembly with care when washing, as the blades are sharp. Contact with the blades' edges can result in laceration.
5. Wipe the motor base clean with a damp cloth.

Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

How to Store

1. Store the Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won't cause harm. Wrap the power cord around the cord wrap on the back of the motor base.

Resetting the Motor Thermostat

The Nutri Ninja | Ninja Blender with Auto-iQ Technology features a unique safety system which prevents damage to the unit's motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the container and ensure that no food is jamming the blade assembly or cutting disc.
3. Allow the appliance to cool for approximately 15 minutes.
4. Re-install the container onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

Available Accessories

Thank you for purchasing your Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology. You may have purchased some of the following additional accessories. Please refer to the assembly and usage instructions on the next few pages for the accessories you purchased.

To purchase the additional accessories shown below, please call customer service at 1-877-646-5288.

The available accessories include a Food Processor Bowl, Food Processor Lid, Chopping Blade Assembly, Dough Blade Assembly, Feed Chute Lid, Slicing/Shredding Disc, Grating Disc, 24 oz. Mini Prep Bowl, Spindle for Discs & Mini Prep Bowl, and Mini Prep Bowl Blade Assembly.

Assembly and Use of the Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

The Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology senses which jar is on the motor base, illuminating available functions. To assemble, place the motor base on a clean, dry, level surface, ensuring suction cups adhere. Hold the desired blade assembly by the top of the shaft and place it onto the drive gear inside the bowl, ensuring it stands upright. The blade will fit loosely. Align and lower the Processor Bowl onto the motor base, handle slightly to the right of the "LOCK" symbol, and rotate clockwise until it clicks. The bowl can be placed with the handle on the front right or front left corner. Add ingredients to the bowl, not exceeding the highest measured marking line. Hold the lid by the handle in the upright position, place it on top of the Processor Bowl, aligning the triangle (✔) on the lid with the triangle (▲) on the handle, and press down until it clicks. The 64 oz. bowl is not intended for blending drinks. Plug the power cord into the electrical outlet and press the power button (⏻). The power button will flash if the bowl and lid are not installed correctly; it will be solid when properly installed.

1. Review warning and caution statements.
2. Place the motor base on a clean, dry, level surface, ensuring suction cups adhere.
3. Holding the desired blade assembly by the top of the shaft, place it onto the drive gear inside the bowl. Ensure that the blade assembly is seated properly and is standing upright. NOTE: The blade will fit loosely on the drive gear.
4. Align and lower the Processor Bowl onto the motor base. Handle should be aligned slightly to the right of the "LOCK" symbol on the motor base.
5. Rotate the bowl clockwise until it locks in place, you will hear a click when the lock is engaged.
6. The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
7. Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
8. Holding the lid by the handle in the upright position, place it on top of the Processor Bowl aligning the triangle (✔) located on the lid with the triangle (▲) located on the Processor Bowl handle. Press the handle down until you hear a click. The triangles on the lid and the Processor Bowl handle MUST be aligned in order for the blender to turn on. NOTE: The 64 oz. bowl is not intended for blending drinks. Do not overfill.
9. Plug the power cord into the electrical outlet and press the power button (⏻). NOTE: As a safety feature, the power button (?) will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button (?) will be solid, indicating that the appliance is ready for use.

Assembly and Use of the Chopping Blade Assembly

To use the chopping blade assembly, review warnings, place the motor base on a clean, dry, level surface, and secure the bowl. Hold the chopping blade assembly by the shaft and place it onto the gear shaft inside the bowl, ensuring it stands straight. Add ingredients and secure the bowl lid. Plug in and press the power button, then select a speed or Auto-iQ program. Pulse ingredients by holding the Auto-iQ Pulse button. Refer to "Speed Settings & Uses" chart. To stop, press the power button and wait for the blade to stop. To remove the lid, press the release button and pull the handle up to a 90-degree angle. Turn the bowl counter-clockwise and lift it. To release the motor base, place hands underneath both sides and gently pull up.

1. Review warning and caution statements.
2. Place the motor base on a clean, dry, level surface, ensuring suction cups adhere.
3. Secure the bowl onto the motor base.
4. Holding the Chopping Blade Assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the Chopping Blade Assembly fits around the gear shaft and that it is standing straight.
5. Add the ingredients and secure the bowl lid onto the bowl.
6. Plug the power cord into the electrical outlet and press on the power button (⏻). Select the speed or Auto-iQ™ program that best suits your needs. Pulse ingredients for even chopping by holding the Auto-iQ Pulse button until your desired consistency is reached. NOTE: Please refer to "Speed Settings & Uses" chart for suggested uses and speeds.
7. When you have reached your desired consistency, stop the appliance by pressing the power button (⏻) and wait for the blade to stop turning.
8. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle.
9. Turn the bowl counter-clockwise and lift it to remove it from the motor base.
10. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Assembly and Use of the Dough Blade Assembly

To use the dough blade assembly, review warnings, place the motor base on a clean, dry, level surface, and secure the bowl. Hold the dough blade assembly by the shaft and place it onto the gear shaft inside the bowl, ensuring it stands straight. Add ingredients and secure the bowl lid. Plug in and press the power button, then select the LOW/DOUGH button and process until ingredients come together. Refer to "Speed Settings & Uses" chart. To stop, press the power button and wait for the blade to stop. To remove the lid, press the release button and pull the handle up to a 90-degree angle. Turn the bowl counter-clockwise and lift it. To release the motor base, place hands underneath both sides and gently pull up.

1. Review warning and caution statements.
2. Place the motor base on a clean, dry, level surface, ensuring suction cups adhere.
3. Secure the bowl onto the motor base.
4. Holding the Dough Blade Assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the Dough Blade Assembly fits around the gear shaft and that it is standing straight.
5. Add the ingredients and secure the bowl lid onto the bowl.
6. Plug the power cord into the electrical outlet and press on the power button (⏻). Select the LOW/DOUGH button and process until ingredients come together to form a mass. NOTE: Please refer to "Speed Settings & Uses" chart for suggested uses and speeds.
7. Once finished making dough, stop the appliance by pressing the power button (⏻) and wait for the blade to stop turning.
8. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle.
9. Turn the bowl counter-clockwise and lift it to remove it from the motor base.
10. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Assembly and Use of the Cutting Discs

WARNING: The Cutting Discs are sharp. Always use the finger holes when placing or removing the cutting discs. Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: Use only the LOW/DOUGH setting when using either disc.

NOTE: The feed chute lid features a two part pusher to guide food through the chute. Use the full pusher for larger items such as cucumbers. Twist and pull to remove the smaller pusher and use the narrow chute for smaller items such as carrots.

NOTE: The Slicing/Shredding Disc is reversible. Use the side labeled "Slicer" for Slicing. Carefully flip the disc over to the side labeled "Shredder" for shredding.

To use the cutting discs, review warnings, place the motor base on a clean, dry, level surface, ensuring suction cups adhere. Secure the bowl onto the motor base. Place the spindle inside the bowl. Use the finger holes to grasp the selected disc and place it over the spindle. Place the feed chute lid on the bowl and turn clockwise until it clicks. Plug in and press the power toggle (⏻) to turn "On". Select LOW/DOUGH on the control panel; the discs will begin spinning. Add food through the feed chute on the lid, using the two-part food pusher. When finished, stop the appliance by pressing the power button (⏻) and wait for the disc to stop turning. Press the button on the feed chute lid to unlock and turn counter-clockwise. Lift to remove from the processor bowl. Using the finger holes, carefully lift the disc out of the bowl and remove the spindle. To release the motor base, place hands underneath both sides and gently pull up.

1. Review warning statements.
2. Place the motor base on a clean, dry, level surface, ensuring suction cups adhere.
3. Secure the bowl onto the motor base.
4. Place the spindle inside the bowl.
5. Use the finger holes to grasp the selected disc and place it over the spindle.
6. Place the feed chute lid on the bowl and turn clockwise until you hear a click indicating the lid is locked in place.
7. Plug the power cord into the electrical outlet and press up on the power toggle (⏻) to turn the power "On".
8. Select LOW/DOUGH on the control panel. The discs will begin spinning.
9. Add the food that you want to slice, shred or grate through the feed chute on the lid. Use the two-part food pusher to help guide the food through the feed chute. The middle piece of the food pusher is removable to use for smaller ingredients.
10. When finished, stop the appliance by pressing the power button (⏻) and wait for the disc to stop turning. Press the button on the feed chute lid located near the handle to unlock and turn the lid counter-clockwise. Lift to remove from the processor bowl. Using the finger holes, carefully lift the disc out of the bowl and remove the spindle.
11. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Assembly and Use of the Mini Prep Bowl

WARNING: Handle the Mini Prep Bowl blade assembly with care as the blades are sharp, and not locked in place. Before emptying the contents of the Mini Prep Bowl, carefully remove the Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the Mini Prep Bowl to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Remove the lid from the Mini Prep Bowl upon completion of processing.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

The mini prep bowl must be used with the flat food processor lid. To assemble, place the 64 oz. bowl onto the motor base. Hold the spindle by the shaft and place it onto the gear shaft inside the 64 oz. bowl, ensuring it stands straight. Place the mini prep bowl aligning the spindle inside the center post. Hold the Mini Prep Bowl Blade Assembly by the shaft and carefully place it over the center post of the mini prep bowl. Add ingredients into the mini prep bowl, not exceeding the "MAX" fill line. Hold the lid by the handle in the upright position, place it on top of the 64 oz. bowl, aligning the arrow (✔) on the lid with the arrow (▲) on the bowl's handle, and press down until it clicks. Plug in and press the power button. Select the speed that best suits your needs. For best results, hold the Auto-iQ™ Pulse button down. Refer to "Speed Settings & Uses" chart. When finished, stop the appliance by pressing the power button and wait for the Mini Prep Bowl Blade Assembly to stop turning. To remove the lid, pull the lid handle up to a 90-degree angle and lift the lid off. Carefully hold the Mini Prep Bowl Blade Assembly by the shaft and lift it out of the mini prep bowl. Turn the bowl counter clockwise and lift it off the base. To release the motor base, place hands underneath both sides and gently pull up.

1. Review warning and caution statements.
2. NOTE: The mini prep bowl must be used with the flat food processor lid.
3. Place the 64 oz. bowl onto the motor base.
4. Holding the spindle by the shaft, place it onto the gear shaft inside the 64 oz. bowl. Ensure that the Mini Prep Bowl Blade Assembly fits around the gear shaft and that it is standing straight.
5. Place the mini prep bowl aligning the spindle inside the center post.
6. Hold the Mini Prep Bowl Blade Assembly by the shaft and carefully place it over the center post of the mini prep bowl.
7. Add ingredients into the mini prep bowl. NOTE: Do not fill ingredients past the "MAX" fill line.
8. Holding the lid by the handle in the upright position, place it on top of the 64 oz. bowl aligning the arrow (✔) located on the lid with the arrow (▲) located on the bowl's handle. Press the handle down until you hear a click.
9. Plug the power cord into the electrical outlet and press on the power button (⏻).
10. Select the speed that best suits your needs. For best results, hold the Auto-iQ™ Pulse button down until you have reached your desired consistency. NOTE: Please refer to "Speed Settings & Uses" chart for suggested uses and speeds.
11. When you have reached your desired consistency, stop the appliance by pressing the power button (⏻) and wait for the Mini Prep Bowl Blade Assembly to stop turning.
12. To remove the lid, pull the lid handle up to a 90° angle and lift the lid off.
13. Carefully hold the Mini Prep Bowl Blade Assembly by the shaft and lift it out of the mini prep bowl.
14. Turn the bowl counter clockwise and then lift off the base.
15. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Programs, Speed Settings & Uses for the Food Processor

* When blending sauces and soups, make sure they're cooled to room temperature first - Ninja® containers are not intended for hot blending.

Warranty & Registration

One (1) Year Limited Warranty

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at its option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC's sole discretion, it will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC, if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. Ninja recommends insuring the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package "ATTENTION CUSTOMER SERVICE".

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable Ninja to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.