DOD Boneshaker Distortion Pedal

Product Overview

The DOD Boneshaker is a versatile distortion pedal designed to deliver powerful and dynamic tonal shaping for guitarists and bassists. It offers extensive EQ control alongside classic distortion, making it a flexible addition to any pedalboard.

Controls and Functions

The front panel of the Boneshaker features several knobs and a footswitch for comprehensive control:

• DISTORTION: Adjusts the amount of distortion gain.
• DEPTH: Adjusts the low frequency 'growl', particularly useful for extended range instruments.
• LEVEL: Controls the overall output level of the distortion effect.
• LOW EQ: Adjusts the low frequency range and its level.
• MID EQ: Adjusts the mid frequency range and its level.
• HIGH EQ: Adjusts the high frequency range and its level.
• INPUT: Connect your instrument here (e.g., guitar or bass).
• FOOTSWITCH: Engages or disengages the effect.
• LED: Illuminates when the effect is enabled.
• OUTPUT: Connect to the next pedal in your chain or directly to your amplifier's input.

Using the Boneshaker

For optimal performance, most guitarists and bassists prefer placing the Boneshaker at the beginning of their effects chain. A typical signal chain order often involves Distortion effects first, followed by Modulation effects (like Chorus, Flanger, Phaser, Tremolo), and finally Time-based effects (Delay and Reverb).

Positioning the Boneshaker towards the front of your signal chain helps preserve its unique character, regardless of the pedals that follow. Experimentation is encouraged, as the Boneshaker also pairs well with other distortion and fuzz pedals.

Specifications

Manufacturer Address: DOD, 59 Hwagok-ro 61gil, Gangseo-gu, Seoul 07590, Republic of Korea. Support: support@digitech.com

Compliance & Safety Instructions

Please read and follow all safety instructions carefully.

General Warnings:

• Electric Shock Hazard: Do not open the unit. Refer all servicing to qualified personnel. [caution symbol]
• Fire/Moisture Hazard: Do not expose the equipment to rain or moisture. [warning symbol]
• Altitude: This product is indicated for low altitude use; do not use above 2000m. [altitude symbol]
• Hazardous Voltages: The unit may contain dangerous voltages. [lightning bolt symbol]
• Refer to Manual: It is necessary for the user to refer to the owner's manual for important information. [exclamation mark symbol]
• User Serviceable Parts: The unit contains no user-serviceable parts. Opening the chassis will void the warranty.
• Liquid Spills: If liquid is spilled on the unit, shut it off immediately and seek service.
• Storms: Disconnect the unit during lightning storms or when unused for long periods to prevent damage.

UK Mains Plug Warning:

A molded mains plug cut from the cord is unsafe. Discard it properly. Never insert a damaged or cut mains plug into a 13 Amp power socket. Ensure the fuse cover is in place; replacement fuses must be 13 Amp and ASTA approved to BS1362.

Disposal Information:

Do not mix this product with general household waste. Utilize designated collection systems for electronic products for proper treatment, recovery, and recycling, to prevent negative environmental and health effects. Contact local authorities for disposal methods in your region. [recycling symbol]

Operating Precautions:

• Read and keep all instructions.
• Heed all warnings and follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• For indoor use only.
• Do not block ventilation openings. Install according to manufacturer's instructions.
• Do not install near heat sources like radiators, stoves, or other heat-producing apparatus.
• Only use attachments/accessories specified by the manufacturer.

Power Cord and Wiring:

Ensure the appliance is connected to a mains socket outlet with a protective earthing connection.

Mains lead wire colors typically correspond as follows:

• GREEN AND YELLOW: EARTH
• BLUE: NEUTRAL
• BROWN: LIVE

If wire colors do not match terminal markings, connect as follows:

• Green/Yellow wire to terminal marked 'E', Earth symbol, or Green.
• Blue wire to terminal marked 'N' or Black.
• Brown wire to terminal marked 'L' or Red.

The green/yellow wire should be connected directly to the unit's chassis.

WARNING: If the ground connection is defeated, certain fault conditions can result in full line voltage between the chassis and earth ground, potentially causing severe injury or death if touched simultaneously.

Power Switch Note: The power switch on this equipment does not break the connection from the mains.

Mains Disconnect: The plug must remain readily operable. For rack-mount installations where the plug is not accessible, an all-pole mains switch with at least 3mm contact separation per pole must be incorporated into the electrical installation.

For 240V supply, use a suitable CSA/UL certified power cord.