Technical Data
AMI
| Category | Specification |
| Inputs | 1 x Microphone Input 1 x Line Input |
| Microphone Input Specification | |
| Frequency response | 12 Hz - 44 kHz (+/-1 dB) |
| Dynamic range | 95 dB (A-weighted) |
| Input sensitivity | 5-200 mV |
| Phantom power | Yes (24 Volts) |
| Line Input Specification | |
| Frequency response | 8 Hz - 44 kHz (+/-1 dB) |
| Dynamic range | 101 dB (A-weighted) |
| Input sensitivity | max. 1 V / max. 40 V |
| Input Impedance | 10 kOhms |
| Outputs | 2 x Line output 1 x Optical output (SPDIF) |
| Line Output Specification | |
| Frequency response | 7 Hz - 44 kHz (+/-1 dB) |
| Dynamic range | 100 dB (A-weighted) |
| Maximum output voltage | 900 mV (RMS) |
| Minimum load | 5 kOhms |
| Loopback function | Yes |
| General Specification | |
| Audio sampling rate | 96 kHz / 32 Bit |
| USB power consumption | max. 250 mA |
| Supported operating systems | Windows, macOS, iOS and Android |
| Microphone | |
| Transducer principle | Condenser (back-electret) |
| Operating principle | Pressure receiver |
| Frequency response | 20 - 20,000 Hz (50 - 16,000 Hz ± 1.5 dB), diffuse-field equalized |
| Polar pattern | Omnidirectional |
| Sensitivity (0 dB = 1 V/Pa) | 15 mV/Pa (= -36.5 dBV) ± 1 dB |
| Nominal Impedance | 160 Ω |
| Nominal load impedance | ≥ 2.2 kΩ |
| Maximum SPL (Sound Pressure Level) | 122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 kΩ |
| Signal-to-noise ratio (related to 1 Pa) | > 57 dB |
| A-weighted equivalent noise level | Approx. 26 dB(A) |
| Power supply | 12 - 48 V phantom power |
| Current consumption | Approx. 1.9 mA |
| Output | Electronically balanced |
