Lithium Electric Polishing Machine

Thank you for purchasing this product. Please read the instruction carefully before use.

I. Safety Instructions

Warning! Read the full instructions. Failure to follow the instructions below may result in electrocution, fire, or serious injury.

1. Working Environment:

Ensure that the environment is clean and bright.
Do not use tools near explosive substances such as flammable liquids or gases.
Ensure that bystanders, especially children, are kept at a safe distance from deployed equipment.

2. Electrical:

The plug of the tool must be appropriate to the type of power socket initially suitable.
Conduct electricity in contact with the ground. Contact with such objects increases the risk of electric shock.
Do not use tools under conditions that may result in direct contact with water.

3. Personal Safety:

Use common sense carefully when using tools. Do not use this tool if you are exhausted and under the influence of alcohol, drugs, or medications that reduce your concentration.
Take good care of yourself at work. Always take care of your eyes.

4. Use and Maintenance of Tools

If the switch does not work properly, please stop using the equipment.
Equipment that cannot be deactivated by the switch poses a risk and requires immediate repair.
If power tools or accessories are damaged, please repair them.
Keep tools out of reach of children and do not provide them to persons who are not familiar with their operation and instructions.

II. Equipment Use

Car polishing: waxing, dewaxing, polishing, sanding.

Home cleaning: floor, marble, wood furniture, metal, tile, etc.

Diagram of Polishing Machine

The polishing machine features a switch, a grip, a lithium battery, a six-speed adjusting knob, and the paste chassis.

III. Operation Instructions

Do not use this product on soft, uneven ground, sloping, or slippery and unstable areas.
Before each use, be sure to check for loose screws, missing parts, and the installation status of the polishing tool.
Before using the product, please read the instruction manual carefully to fully understand how to use the product.
Do not insert batteries when adjusting the equipment.

Battery Charging Indicators:

Indicator Light	Status
Red light is on	Batteries need to be recharged
Red and yellow lights are on at the same time	About half of the power
Red, yellow, and green lights are on at the same time	The battery is full

One battery can last for around 40 to 50 minutes. If the red light is on, it means the battery is charging. Charging is ready when the green one lights up. It takes 50-60 minutes to fully charge.

How to Remove Batteries

Press the release button on the battery.
Remove the battery from the battery dock.

How to Install Batteries

Insert the battery into the base of the machine.
Check whether the battery is fixed.

How to Install the Adhesive Disc

Make sure the switch is off.
Stick the fluffy side of the adhesive disc to the chassis.
Make sure the paste is firm.

Waxing Polishing

Apply the wax to the sponge dish.
Do not apply liquid wax directly to the vehicle.
Move the equipment at a uniform speed on the surface to work at a matching speed.
Do not press the equipment.
Be sure to turn off the equipment before removing it from the surface.
Corners or grooves that are hard to reach need to be done manually.

IV. Technical Parameters

Polishing Machine

Parameter	Specification
Voltage	DC 12V
Chassis Diameter	145 mm
Net Weight (excluding batteries)	1.08 kg
Electric Current	5A
Rotation Speed	2500-5000 RPM

V. Cleaning and Maintenance

Turn off the device and remove the battery from the battery dock.
Do not store it in a place with dust and dirt.
Use a twisted wet cloth to clean the equipment shell.
Do not lubricate the inside of the machine. Dust and debris may deposit on the grease.
Do not store it in a damp place.
Protect the machine from direct sunlight.
Storage temperature: 5-20°C.

	Bench Buffer Polisher with Dual Wheels A bench buffer polisher featuring a powerful motor, dual buffing wheels, and a compact design for various polishing tasks. Includes dimensions and operational information.
	High-Quality Angle Grinder with Water Feed System Detailed specifications and dimensions for a powerful angle grinder designed for wet polishing and grinding applications, featuring a water feed system for dust suppression and improved performance. Includes safety certifications.
	4.5" x 7/8" XA60 Grit Flap Disc for Grinders Information on a 4.5" x 7/8" XA60 grit flap disc, including safety warnings and operating specifications. This disc is designed for use with grinders and features a maximum safe operating speed of 13,300 RPM.
	Exterior Rearview Mirrors with Electric Drive - Adjustment and Features This document provides instructions on adjusting and operating the electric exterior rearview mirrors, including features like automatic folding and reverse tilt.
	Wheels and Tires: Specifications and Maintenance Detailed information on wheel and tire sizes, specifications, and pressure for various models, including temporary spare tires. Learn about optional wheels and tire pressure guidelines.
	F07-01 Car Jump Starter User Manual Comprehensive guide for the F07-01 car jump starter, covering safety, usage, charging, and specifications. Learn how to safely jump-start your vehicle and maintain the power pack.
	20V 4Ah Brushless Rotary Hammer Drill Specifications Detailed specifications and dimensions for the 20V 4Ah brushless rotary hammer drill, featuring a powerful BL motor and lithium-ion battery.
	Bluetooth Device Specifications Detailed technical specifications for a Bluetooth device, including version, connectivity range, waterproof rating, charging details, battery type, compatible operating systems, and Bluetooth protocols.