Wheels and Tires

Wheel and Tire Specifications

This section details the wheel sizes and technical characteristics of the tires.

Wheel Size Tire
5.5J x 19 T175/80 R19 122M (Temporary spare tire)
8J x 19 255/55 R19 111 H or V – All-terrain tires
8.5J x 20 255/50 R20 109 Y – All-terrain and all-terrain sport tires

Optional Wheels and Tires – Specify Parameters

The diagram below illustrates key parameters related to wheels and tires:

  1. Front tire pressure.
  2. Rear tire pressure.
  3. Wheel/tire size, type, and technical specifications.

Note: Additional tires intended for off-road use with speed ratings Q or T have speed limitations. If a tire has a speed rating of Q, the speed should not exceed 160 km/h (100 mph). For speed rating T, the limitation is 190 km/h (118 mph).

Tire Pressure

Tire pressure is indicated on the sticker located on the B-pillar on the driver's side (visible when the driver's door is open). Refer to the "Tire Information" section on page 288.

Tire Pressure for Temporary Spare Wheel kPa bar psi
Any position or load variant 420 4.2 60

PDF preview unavailable. Download the PDF instead.

65 GPL Ghostscript 10.03.0

Related Documents

Preview Vehicle Safety Procedures: Wheel Replacement Guide
A comprehensive guide on the safe procedures for replacing a vehicle's wheel, including essential safety precautions, tool usage, and step-by-step instructions for jacking and wheel removal/installation.
Preview Vehicle Identification and Warning Labels Location Guide
This guide details the location of various identification plates and warning labels on the vehicle, including VIN, engine number, tire pressure, and safety information. It explains the meaning of symbols on warning labels related to high voltage and component handling.
Preview Stainless Steel Farmhouse Sink Dimensions and Specifications
Detailed dimensions and specifications for a stainless steel farmhouse sink, including exterior and interior measurements, and minimum cabinet size requirements.
Preview Drill Pipe Slip Specifications and Weight Chart
A detailed technical specification chart outlining drill pipe slip dimensions, body sizes, pipe sizes in inches and millimeters, and corresponding weights in kilograms and pounds for SDS, SDML, and SDXL models.
Preview Product Size and Material Information
Details on product dimensions (length, width, height), weight, and material composition.
Preview Product Size and Material Information
Details on product dimensions, weight, and material composition.
Preview Product Size and Material Information
Provides size and material details for a product, including dimensions and weight for different sizes.
Preview Product Size and Material Information
This document provides size, weight, and material details for a product. It includes dimensions (length, width, height) and the material composition.