Angle Grinder with Water Feed System
This document provides key dimensions and certification information for an angle grinder equipped with a water feed system, suitable for wet polishing and grinding tasks.
Product Dimensions
The angle grinder has the following dimensions:
- Length: 16.3 inches / 415 mm
- Height: 8.7 inches / 220 mm
- Base Diameter (approximate): 6.7 inches / 170 mm
Certifications
The product has been certified for safety and performance:
- Intertek Certified: 4009325
- Conforms to UL STD NO. 60745-1 and 60745-2-3
- Certified to CAN CSA STD C22.2 N 60745-1 and 60745-2-3
Product Features
The angle grinder features an integrated water feed system, indicated by the visible tubing and brass fittings. This system is designed to supply water directly to the grinding surface, which is beneficial for dust suppression and cooling during operation, particularly in applications like stone or concrete polishing.
The tool includes a main body with a power switch and a secondary handle for improved control and stability during use. The grinding head assembly is designed to accommodate polishing pads or grinding discs.
