Turtle Beach Stealth 600 Gen 3 Quick Start Guide

Setup

For Xbox®

1. Set the USB wireless transmitter to "Xbox" mode.
2. Connect the USB wireless transmitter to the USB-A port on your Xbox. [Diagram showing USB transmitter connection to Xbox]
3. Power on the headset. [Diagram showing headset power button]
4. Wait for the headset and USB transmitter to pair. [Diagram showing headset and transmitter pairing]

For PlayStation®, PC, and Nintendo Switch™

1. Set the USB wireless transmitter to "USB" mode.
2. Connect the USB wireless transmitter to the USB-A port on your PlayStation®, PC, or Nintendo Switch™. [Diagram showing USB transmitter connection to PlayStation, PC, or Nintendo Switch]
3. Power on the headset. [Diagram showing headset power button]
4. Wait for the headset and USB transmitter to pair. [Diagram showing headset and transmitter pairing]

Firmware Update

Ensure your headset is updated with the latest firmware for optimal performance.

Download the Swarm™ II mobile app for Android or iOS to update your headset and customize settings. Alternatively, use the Swarm™ II desktop software for Windows available at turtlebeach.com/swarm2.

Package Contents

• Stealth™ 600 Gaming Headset
• USB Wireless Transmitter
• Charging Cable (USB-A to USB-C)

Headset Controls

• Power Button [PWR]: Press [2s] to power on/off.
• Superhuman Hearing Button [SH]: Press [1.5s] for Superhuman Hearing on/off.
• EQ Mode Button [EQ]: Press [1.5s] to cycle EQ presets.
• Bluetooth Multi-Function Button [MFB]: Press [1.5s] for Bluetooth pairing. Press [1s] to answer/end calls or play/pause media.
• QuickSwitch Button [QS]: Press [1s] to switch between 2.4GHz wireless and Bluetooth modes.
• Mute: Press the microphone boom to mute/unmute.
• Master Volume [VOL]: Rotate dial for volume adjustment.
• Game/Chat Mix: Rotate dial to adjust balance between game and chat audio.
• Variable Mic-Monitoring: Rotate dial to adjust how much of your own voice you hear.
• USB Charge & Update Port: USB-C port for charging and firmware updates.

Bluetooth Setup

The Stealth 600 will enter Bluetooth pairing mode when powered on. If no device is connected within two minutes, pairing mode will stop.

1. Press and hold the Bluetooth multi-function button (MFB) until you hear the Bluetooth pairing tone.
2. After placing your headset in pairing mode, select the headset from your device's Bluetooth settings to connect.
3. The Bluetooth MFB can also be used to answer/end calls and control media playback on compatible mobile phones. Incoming calls can be answered by a single press of the Bluetooth MFB. The headset will automatically switch back to 2.4GHz Wireless mode after the call.

QuickSwitch Button

The QuickSwitch button allows you to quickly switch between low-latency 2.4GHz Wireless and Bluetooth modes.

Use Bluetooth mode for calls, music, or connecting to other Bluetooth devices. The 2.4GHz Wireless mode is recommended for the best gaming performance on consoles or PC. Note: Some advanced audio features available in 2.4GHz Wireless mode may not be supported in Bluetooth mode.

Regulatory Compliance

This product complies with relevant EU directives and regulations, indicated by the CE marking.

Disposal: This symbol [waste electrical and electronic equipment symbol] on the product or packaging indicates that this product must not be disposed of with household waste. Dispose of waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment to conserve natural resources and protect human health and the environment.

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that this device does not cause harmful interference.

Canada: Complies with Innovation, Science and Economic Development Canada's licence-exempt RSSs.

Warranty and Support

For questions, visit turtlebeach.com/support.

Register your product for important updates at turtlebeach.com/productregistration.

For warranty information, visit turtlebeach.com/warranty.

For warranty service for purchases in Australia, contact the VTB repair centre at 1300 074 512.