Headset Controls
The Stealth™ 600 Gen 2 MAX headset features various controls for an optimal gaming experience.
USB Charge & Update Port
This port is used for charging the headset and for firmware updates.
Power Button
- Press for 1 second: Power On/Off
- Press quickly: Superhuman Hearing™ On/Off
Superhuman Hearing™ Mode: This mode helps pinpoint quiet audio cues like enemy footsteps and weapon reloads. Activate or deactivate by pressing the POWER button once, quickly, during gameplay.
Master Volume (In USB Mode) / Game Volume (In Xbox Mode)
Adjusts the overall volume.
Chat Volume (When transmitter is in Xbox Mode)
Adjusts the chat volume.
Variable Mic Monitoring (When transmitter is in USB Mode)
Adjusts the level of your own voice heard in the headset.
Microphone Mute
Flip the microphone up to mute it. An audible tone will play when the mic is muted or unmuted. Flip down to unmute.
🎤 Mic Unmuted ✅ Mic Muted
MODE Button
Cycle through audio presets. Refer to the EQ presets table below.
| EQ Presets | Description |
|---|
| Signature Sound | Standard sound profile |
| Bass Boost | Amplification of bass frequencies |
| Bass + Treble Boost | Amplification of bass and treble frequencies |
| Vocal Boost | Amplification of vocal frequencies |
Regulatory Compliance Statements for the EAR FORCE Stealth™ 600X Gen 2 MAX
Models: Stealth600X-MAX-RX & Stealth600X-MAX-TX
Local Restrictions on Radio Usage
These wireless products are designed for use in specific countries. Users are responsible for ensuring products are used only in intended countries and configured with correct frequency/channel settings to avoid infringement of national wireless network regulations. For more information, visit turtlebeach.com/homologation.
FCC Compliance Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. Users are advised to try to correct interference by reorienting the receiving antenna, increasing separation between equipment and receiver, connecting equipment to a different circuit, or consulting a dealer.
RF Radiation Exposure & Hazard Statement
To comply with FCC RF exposure requirements, this device must be installed to ensure a separation distance of greater than 2 cm (0.8 in.) from all persons. Using higher gain antennas or types not covered under FCC certification is not allowed. The transmitter must not be co-located or operated with any other antenna or transmitter.
Non-Modification Statement
Only supplied external antennas should be used. Unauthorized modifications could damage the device and violate FCC regulations. Any changes not expressly approved by Turtle Beach could void the user's authority to operate this equipment. Contact Turtle Beach for approved 2.4 GHz antennas.
Canadian ICES Statements
This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference. To prevent radio interference to licensed services, this device is intended for indoor/outdoor operation to ensure maximum shielding. The equipment is not designed to be co-located or operated with other transmitters.
European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in EU and EFTA member countries (Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom, Iceland, Liechtenstein, Norway, Switzerland).
Declaration of Conformity CE Marking: Indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union [2014/53/EU]. Conformance standards include EN 62368-1, EN 301 489, EN 55032, EN 61000, EN 300 328, EN 62311. For a complete copy of the Declaration of Conformity, visit turtlebeach.com/homologation.
Waste Electrical and Electronic Equipment (WEEE) Symbol: This symbol indicates that the product must not be disposed of with other household waste. It should be taken to a designated collection point for recycling. Separate collection helps conserve natural resources and protects human health and the environment. For more information, contact your local authority or the product retailer. Turtle Beach Europe Ltd is obligated as a producer under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. More information on packaging waste management and recycling principles is available at complydirect.com/the-recycling-room/.
