NZXT Kraken Z RGB Series LCD Liquid Cooler

Table of Contents

The table of contents is excluded as per instructions.

Product Contents

The following components are included:

• A. Kraken Z53 / Z63 / Z73 Liquid Cooler Kit (x1)
• B. Intel Retention Bracket (pre-installed) (x1)
• C. AMD Retention Bracket (x1)
• E. Intel Spacer Socket 1200/115X (x4)
• F. Intel Spacer Socket 1700 (x4)
• G. AMD Spacer (x4)
• H. AMD Sleeve (x4)
• I. Fan Screw 30 mm UNC 6-32 (Z53-x16, Z63-x16, Z73-x12)
• J. 5 mm Screw UNC 6-32 (Z53-x8, Z63-x8, Z73-x12)
• K. Washer (Z53-x16, Z63-x16, Z73-x24)
• L. Thumb Screw (x4)
• M. Multi-pin Cable (x1)
• N. Micro-USB Cable (x1)
• O. 500 mm Fan Connection Cable (x1)
• P. 50 mm Fan/Fan Cable (Z53 - x1, Z63 - x1, Z73 - x2)
• Q. Aer RGB Fan (Z53 - x2 120mm, Z63 - x2 140mm, Z73 - x3 120mm)

Preparation

2.1 Preparation - Intel LGA 1700 & 1200 / 115X

STEP 1 - BACKPLATE PREPARATION

Move the four movable elements of the Intel backplate inwards for socket 1200 / 115X or outwards for socket 1700.

• SOCKET 1200/115X: The movable elements should be positioned inwards.
• SOCKET 1700: The movable elements should be positioned outwards.

STEP 2 - BACKPLATE INSTALLATION

Install the Intel backplate on the rear of the motherboard as shown. Ensure the movable elements are properly seated in the motherboard holes and that the CPU bracket plate is correctly positioned within the backplate cutout.

STEP 3 - SPACER INSTALLATION

Install the four spacers for socket 1700 & 1200 / 115X onto the front of the motherboard.

2.2 Preparation - Intel LGA AMD

STEP 1

Remove the standard AMD mounting bracket and retain the original backplate on the rear of the motherboard. Note: For TR4 connector, proceed to AMD - Step 4.

STEP 2

On the front of the motherboard, install the AMD sleeves. Depending on your connection interface, ensure the sleeves are placed with the connection interface name facing upwards.

• AM5: Sleeve orientation indicated.
• AM4: Sleeve orientation indicated.

STEP 3

On the front of the motherboard, install the four AMD spacer screws.

STEP 4 - CHANGING THE RETENTION BRACKET

1. Press the Intel retention bracket and push it towards the pump.
2. Rotate the bracket counter-clockwise to release it.
3. Remove the Intel retention bracket.
4. Repeat the process in reverse order to install the AMD retention bracket onto the pump. For TR4 socket, install the AMD TR4 retention bracket provided in the Threadripper processor box.

Installation

3.1 Pump Installation - Pump Orientation

The display orientation can be adjusted in 90° increments via the CAM software. You can orient the pump tubes according to your motherboard component layout.

• DEFAULT: Shows the default orientation.
• LOGICAL ORIENTATION ADJUSTMENTS: Indicates the ability to adjust orientation.

Place the pump with the retention bracket onto the CPU. Ensure the four spacers pass through the bracket holes and secure the installation with the thumb screws.

• INTEL: Illustration showing pump installation on Intel socket.
• AMD AM5/AM4: Illustration showing pump installation on AMD AM5/AM4 sockets. The diagram indicates a specific tightening order (1-2-3-4) and shows the correct placement for socket 1700 and socket 1200 / 115X.

3.2 Pump Installation - INTEL/AMD AM5/AM4

This section is covered within 3.1.

3.3 Pump Installation - AMD TR4

Place the pump with the retention bracket onto the CPU. The screw holes for the TR4 socket are of different lengths. Ensure all four screws are aligned and tighten them in the indicated order (1 to 4).

• The diagram shows the TR4 socket with screw hole dimensions (46mm and 65.2mm) and the tightening sequence.

3.4 Radiator and Fan Installation

Depending on your installation type, use the appropriate hardware:

• DIRECT INSTALLATION
• INDIRECT INSTALLATION

NOTE: Always use washers to prevent damage.

DIRECT INSTALLATION

For an installation where the radiator is directly attached to the chassis, first install the fans using the 30 mm screws and washers. Then, use the 5 mm chassis screws and washers to install the radiator.

INDIRECT INSTALLATION

For an installation where the fans are placed between the radiator and the chassis, use the 30 mm fan screws and washers.

3.5 Fan Setup

Connect the fan cable to the first 4-pin connector of the multi-pin cable. Use the other available connectors as needed.

• The diagram shows the multi-pin cable (M) with multiple connectors for fans (Q).

3.6 Pump Tachometer Connection

Connect the 3-pin connector of the multi-pin cable to the CPU_FAN or AIO_PUMP 4-pin connector on the motherboard.

NOTE: You may need to disable the fan failure alarm in the motherboard BIOS if the CPU_FAN connector is unused.

3.7 SATA Power Cable Connection

Connect the SATA power cable to the corresponding power cable from the power supply unit.

3.8 USB Cable Connection

Connect the micro-USB cable to the pump and to an available internal USB 2.0 header on the motherboard.

3.9 Connecting RGB LED Peripherals for Lighting Control

Check the orientation and connect your NZXT RGB compatible peripherals to the RGB LED connector of the multi-pin cable.

3.10 Connecting Aer RGB Fans

Connect the fan connection cable to the Aer RGB 2.

To add another fan, connect the 50 mm fan-to-fan connection cable through the output port of the first fan and the input port of the second fan.

NZXT CAM Software

Download and install NZXT CAM from nzxt.com/camapp.

This software is available in multiple languages: English, Spanish, French, German, Italian, Portuguese, Russian, Korean, Japanese, Chinese (Simplified), and Chinese (Traditional).

5. APPENDIX

5.1 NZXT Global Warranty Policy

This NZXT Global Warranty Policy governs the sale of products by NZXT to you.

I. WARRANTY LENGTH

Any replacement product will be covered under warranty for the remainder of the warranty period or thirty days, whichever is longer. Proof of purchase is required for warranty service.

II. WHO IS PROTECTED

The Warranty covers only NZXT products purchased by the original consumer.

REFURBISHED NZXT PRODUCT

All NZXT Certified Refurbished Products: 1 Year Warranty Length for Parts.

III. WHAT IS AND IS NOT COVERED

Our warranty is not an unconditional guarantee. If the product, in NZXT's reasonable opinion, malfunctions within the warranty period, NZXT will provide a repaired or replacement product (new or refurbished, with similar function and equal or greater value depending on supply) at its sole discretion. Our warranty does not cover:

• Any product or serial number/warranty sticker modification without NZXT permission.
• Any damage that is not a manufacturing defect.
• Damage, deterioration, or malfunction resulting from: accident, abuse, misuse, neglect, fire, water, lightning, acts of nature, unauthorized product modification, or failure to follow instructions.
• Improper installation, unauthorized alterations or modifications, or repair or attempted repair by unauthorized personnel.
• Shipping or transport damage (claims must be made with the carrier).
• Normal wear and tear.

NZXT does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose. NZXT covers two-way return shipping for all exchanges and returns for NZXT Store orders. For other authorized dealers, NZXT Support covers one-way shipping from NZXT back to the end-user for exchanges. Two-way expedited shipping is provided for all PSUs under the Less Than Three program, regardless of purchase location, provided it's an approved NZXT reseller.

IV. EXCLUSION OF DAMAGES (DISCLAIMER)

NZXT's sole obligation and liability under this warranty is limited to the repair or replacement of a defective product with either a new or refurbished product with a similar function that is equal or greater in value at our option. NZXT shall not be liable for any incidental or consequential damage, including but not limited to damages resulting from interruption of service, loss of data, business, or liability in tort relating to this product or its use or possession.

V. LIMITATIONS OF IMPLIED WARRANTIES

There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I.

VI. TO OBTAIN TECHNICAL SUPPORT

If you need help after referencing your product owner's manual, contact NZXT by phone at +1 (800) 228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.com/customer-support.

VII. HOW TO OBTAIN A WARRANTY SERVICE FROM NZXT

To receive warranty service for products purchased directly from NZXT, submit a request via the NZXT Support site detailing the problem. If a technician deems the product defective or requiring testing, you will need to provide a copy of your proof of purchase to submit a Return Merchandise Authorization (RMA) request. Once approved, you will receive an RMA number and instructions to ship the defective item back to NZXT with the RMA number clearly marked on the package. NZXT recommends taking appropriate measures to safeguard the product from damage during shipping.

VIII. APPLICABLE LAW AND ADDITIONAL LEGAL RIGHTS FOR CONSUMERS

This warranty grants specific legal rights. These conditions are governed by the laws of California (excluding its conflict of law provisions). The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. The non-exclusive jurisdiction of the courts of California is agreed, meaning you may bring a claim to enforce your consumer protection rights in your country of habitual residence, where you may have additional rights. These rights may vary.

In the United Kingdom:

• Up to 30 days: immediate refund for faulty goods.
• Up to six months: full refund in most cases if goods cannot be repaired or replaced.
• Up to six years: entitlement to some money back if goods do not last a reasonable length of time.
• If the claimant is not the original consumer, the NZXT Warranty covers the product provided proof of transfer of the guarantee benefit from the original consumer is provided.
• Implied warranties under the Consumer Rights Act 2015 state that goods must be as described, fit for all purposes for which such goods are usually supplied, and of satisfactory quality.

In the EU:

• Consumers with habitual residence in the EU enjoy additional protections afforded by provisions that cannot be derogated from by agreement by virtue of the law where they have their habitual residence.

IX. WARRANTY SERVICE FROM RESELLERS

To obtain warranty service, provide proof of purchase (store receipt or invoice). If deemed necessary, repair or replacement product will be provided.

• In North America: Within the first 60 days, return to your dealer or reseller for replacement. If unable to return to dealer, contact NZXT Customer Support. NZXT will not accept returns without prior approval and an RMA number.
• In Europe: Within the first year, return to your dealer or reseller for replacement. If unable to return to dealer, contact NZXT Customer Support. NZXT will not accept returns without prior approval.
• In Australasia: Within the first two years, return to your dealer or reseller for replacement. If unable to return to dealer, contact NZXT Customer Support. NZXT will not accept returns without prior approval.

Shipping costs are initially borne by you; however, if the item is defective, NZXT will reimburse reasonable postage or transportation costs.

• Outside North America, Europe, and Australasia: Contact the retailer or distributor from whom you purchased the product for warranty service.

X. NZXT.COM STORE RETURNS/EXCHANGE POLICY

Eligible products under this NZXT Warranty qualify for a full refund or exchange only with an authorized RMA number and if returned to the NZXT.com store inventory within 30 days of purchase. Returns are not allowed beyond 30 days. The NZXT.com Store reserves the right to deny any return or exchange. Refunds will be credited to the original method of payment. To initiate a return, submit a request via the NZXT support site.

Support and Service

For questions or problems with your NZXT product, contact support.nzxt.com. Please include a detailed explanation of your problem and your proof of purchase. For comments and suggestions, email designer@nzxt.com. Thank you for purchasing this product.

For more information about NZXT, visit NZXT.com.

Multilingual Support Information:

• English: support.nzxt.com, service@nzxt.com, designer@nzxt.com, NZXT.com
• Spanish: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• French: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• German: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• Italian: support.nzxt.com, service@nzxt.com, designer@nzxt.com, NZXT.com
• Portuguese: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• Russian: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• Korean: support.nzxt.com, designer@nzxt.com, NZXT.com
• Japanese: service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• Chinese (Simplified): service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com
• Chinese (Traditional): service@nzxt.com, support.nzxt.com, designer@nzxt.com, NZXT.com

Compliance and Safety Information

Designed in Los Angeles, California. Made in China.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B) / NMB-3 (B)

The maximum ambient temperature is 50°C, the maximum normal operating temperature of the radiator (coolant) is 60°C, and the maximum abnormal temperature of the radiator (coolant) is 70°C.

This equipment is not suitable for use in locations where children are likely to be present.

Electrical Appliance Safety Management Act:

• Product Name: Liquid CPU Cooling System
• Model Names: RL-KRZ73-01 / RL-KRZ63-01 / RL-KRZ53-01
• Rated Input: 5Vdc, 12Vdc
• Country of Manufacture: China
• Manufacturing Date: To be indicated separately
• After-Sales Service Contact: 0802123278

Environmental Information: The number within this label indicates the product's eco-friendly use period of 10 years under normal use. Some components may also have eco-friendly use period labels; the eco-friendly use period for those components is indicated by the number on the label. Note: Ceramic or glass in circuit boards/connectors may contain lead.