NZXT Kraken X Series Liquid Cooler

Component List

• A. Kraken X53 / X63 / X73 x1
• B. Intel Retention Bracket (pre-installed) x1
• C. AMD Retention Bracket x1
• D. Intel Backplate x1
• E. Intel Socket 115X/1366 Standoff x4
• F. Intel Socket 2011/2066 Standoff x4
• G. AMD Standoff (AM4) x4
• H. Thumbscrew x4
• I. 30mm UNC 6-32 Fan Screw (Quantities vary by model: X53/X63 - x16, X73 - x12)
• J. 5mm UNC 6-32 Screw (Quantities vary by model: X53/X63 - x8, X73 - x12)
• K. Washer (Quantities vary by model: X53/X63 - x16, X73 - x24)
• L. Aer P Fan (X53 - 2x 120MM, X63 - 2x 140MM, X73 - 3x 120MM)
• M. Breakout Cable Set x1
• N. Micro-USB Cable x1

Preparation - Intel LGA 115X / 1366

Installing the Backplate

Step 1: Move all four sliders on the Intel backplate to the innermost positions for Socket 115X or the outermost positions for Socket 1366.

Step 2: Install the Intel backplate on the rear of the motherboard as oriented in the picture. Please ensure the sliders fit into the mounting holes and the backplate of the CPU socket fits within the cut-out of the Intel backplate.

Installing the Standoffs

Step 3: From the front of the motherboard, install the four Socket 115X/1366 standoffs.

Preparation - Intel LGA 2011/2066

Installing the Standoffs

Step 1: From the front of the motherboard, install the four Socket 2011/2066 standoffs.

Preparation - AMD

Preparing the Retention Bracket

Step 1: Remove the stock AMD mounting bracket and keep the original backplate on the rear of the motherboard. (*For SocketTR4, please skip to AMD - Step 3*)

Installing the Standoffs

Step 2: From the front of the motherboard, install the four AMD standoffs (AM4).

Changing the Retention Bracket

1. Press and hold the Intel retention bracket firmly towards the pump.
2. Rotate the Intel retention bracket counter-clockwise to release.
3. Pull out the Intel retention bracket.
4. Follow these steps in reverse order to install the AMD retention bracket onto the pump.

For SocketTR4, install the AMD SocketTR4 retention bracket included inside the Threadripper CPU retail box.

Installing the Pump - Pump Orientation

The pump cap has a rotatable upper cap with 12 locking points for NZXT logo orientation. Depending on your motherboard, you can orient the pump's tube orientation to fit your needs.

Installing the Pump - Intel/AMD AM4

Place the pump with the retention bracket onto the CPU. Ensuring the standoffs go through the holes on the bracket and securely apply the thumb nuts.

Refer to visual guides for specific socket dimensions (e.g., 54mm, 90mm).

Installing the Pump - AMD TR4

Place the pump with the retention bracket onto the CPU. The SocketTR4 screw holes have a short and long side. Ensure the four screws are aligned and tighten the screws in sequence from 1 through 4.

Refer to visual guides for specific socket dimensions (e.g., 46mm, 65.2mm).

Mounting the Radiator and Fans

Depending on your radiator mounting setup, please use the appropriate screws to mount the radiators. Note: Always use washers to prevent damage.

Direct Mounting

For mounting in which the radiator fits directly onto the case, please install the fan(s) first using the 30mm fan screws and washer. Use the 5mm case screws and washers to mount the radiator.

Indirect Mounting

For mounting in which the fan(s) fit between the radiator and chassis, please use the 30mm fan screws and washers for mounting.

Powering the Fans

Connect the fans to your motherboard or a fan controller (not included).

Connecting the Pump Tach

Connect the 3-pin connector on the breakout cable set to the 4-pin CPU_FAN or AIO_PUMP connector on the motherboard.

Note: You may need to disable fan-fail warning within the motherboard BIOS if CPU_FAN is unused.

Connecting the SATA Power Cable

Connect the SATA power cable on the power cable set to the SATA power cable from the power supply.

Connecting the USB Cable

Connect the Micro-USB cable from the pump to an available USB 2.0 internal connector on the motherboard.

Connecting RGB LED for Lighting Control (Optional)

Check the orientation and connect compatible NZXT RGB devices to the RGB LED connector on the breakout cable. (Lighting accessories sold separately)

Downloading NZXT CAM

After setting up the Kraken, turn on your PC and proceed to download and install NZXT CAM software to enable Kraken controls: nzxt.com/camapp/

Regulations

Designed in Los Angeles, California. Made in China.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B) / NMB-3 (B)

The maximum ambient temperature is 50°C, the maximum normal operating temperature of the radiator (coolant) is 60°C, and the maximum abnormal temperature of the radiator (coolant) is 70°C.

This equipment is not suitable for use in locations where children are likely to be present.

RoHS Compliance

Note: The table indicates the concentration of restricted substances. '>' symbol means 'greater than'.

NZXT Global Warranty Policy

I. Warranty Length

Refurbished NZXT Product:

Any replacement product will be covered under warranty for the remainder of the warranty period or thirty days, whichever is longer. Proof of purchase is required for warranty service.

II. Who is Protected

The Warranty covers only NZXT products purchased by the original consumer.

III. What is and is Not Covered

Our warranty is not an unconditional guarantee. If the product malfunctions within the warranty period, NZXT will provide a repaired or replacement product (new or refurbished) with similar function and equal or greater value. Our warranty does not cover:

• Any product or serial number/warranty sticker modification applied without permission from NZXT.
• Any damage that is not a manufacturing defect.
• Damage, deterioration or malfunction resulting from: accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification or failure to follow instructions.
• Improper installation, unauthorized alterations or modifications, or repair or attempted repair by anyone not authorized by NZXT.
• Shipping or transport damage (claims must be made with the carrier).
• Normal wear and tear.

NZXT does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose.

For NZXT Store orders, NZXT covers two-way return shipping for all exchanges and returns. For other authorized dealers, NZXT Support does not cover return shipping and only covers one-way shipping from NZXT back to the end user for exchanges. Two-way expedited shipping is provided for all PSUs covered under the Less Than Three program.

IV. Exclusion of Damages

NZXT's sole obligation and liability under this warranty is limited to the repair or replacement of a defective product. NZXT shall not be liable for any incidental or consequential damage, including but not limited to damages resulting from interruption of service and loss of data, business, or liability in tort relating to this product or resulting from its use or possession.

V. Limitations of Implied Warranties

There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I.

VI. To Obtain Technical Support

If you need help after referencing the owner's manual, contact NZXT by phone at +1 (800) 228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.com/customer-support.

VII. How to Obtain Warranty Service from NZXT

To receive warranty service for products purchased directly from NZXT, submit a request via the NZXT Support site. If the product is deemed defective or requiring testing, you will need to provide proof of purchase to submit a Return Merchandise Authorization "RMA" request. Once approved, you'll receive an RMA number and instructions to ship the defective item back to NZXT with the RMA number clearly marked on the package. NZXT recommends safeguarding the product from damage during shipping.

VIII. Applicable Law and Additional Legal Rights for Consumers

This warranty is governed by the laws of California (excluding its conflict of law provisions). You may have additional consumer protection rights in your country, state, or province of residence. These rights may vary.

In the United Kingdom:

• Up to 30 days: immediate refund for faulty goods.
• Up to six months: full refund if goods can't be repaired or replaced.
• Up to six years: entitlement to some money back if goods do not last a reasonable length of time.

If the person seeking warranty is not the original consumer, the NZXT Warranty will cover the product if they can provide proof of transfer of the guarantee from the original consumer.

The Consumer Rights Act 2015 states that goods must be as described, fit for purpose, and of satisfactory quality.

In the EU:

Consumers with habitual residence in the EU enjoy additional protections afforded by provisions that cannot be derogated from by agreement by virtue of the law of their habitual residence.

IX. Warranty Service from Resellers

For warranty service, provide proof of purchase (store receipt or invoice) to receive service, repair, or replacement. In North America: Within 60 days, return to dealer/reseller. If still under warranty and unable to return, contact NZXT Customer Support. In Europe: Within 1 year, return to dealer/reseller. If still under warranty and unable to return, contact NZXT Customer Support. In Australasia: Within 2 years, return to dealer/reseller. If still under warranty and unable to return, contact NZXT Customer Support. NZXT will reimburse reasonable shipping costs if the item is defective. Outside North America, Europe, and Australasia: Contact the retailer or distributor.

X. NZXT.COM Store Returns/Exchange Policy

Eligible products qualify for a full refund or exchange within 30 days of purchase with an authorized RMA number. Returns are not allowed beyond 30 days. NZXT.com Store reserves the right to deny any return or exchange. Refunds will be credited to the original method of payment. To initiate a return, submit a request via the NZXT support site.

Support and Service

If you have questions or problems with your NZXT product, please contact us using our support system: support.nzxt.com. Please include a detailed explanation of your problem and your proof of purchase.

For comments and suggestions, you can email our design team: designer@nzxt.com.

For more information about NZXT, please visit us online.

NZXT Website: nzxt.com