BISSELL ICONPET TURBO 3175D

Introduction

This user guide provides essential information for operating and maintaining your BISSELL ICONPET TURBO 3175D vacuum cleaner.

What's Included

Your BISSELL ICONPET TURBO package contains:

• Main vacuum unit (handle and motor housing)
• Extension tube
• Floor head
• Crevice tool
• Upholstery tool
• Charging dock
• Power adapter

Assembly

Follow these steps to assemble your vacuum cleaner:

1. Mount the charging dock to the wall using a [Screwdriver].
2. Secure the charging dock in place.
3. Attach the extension tube to the main unit.
4. Attach the floor head to the extension tube.

Charging the Battery

Ensure the vacuum cleaner is fully charged before its first use.

1. Connect the power adapter to the charging dock and plug it into a wall outlet ?.
2. Place the vacuum cleaner onto the charging dock.
3. The charging indicator will display the charging status. A full charge typically takes approximately 4 hours ⏱️.

Relevant model numbers for charging accessories: SSC-320110EU, SSC-320110UK.

Operation

Operating your BISSELL ICONPET TURBO:

1. To turn the vacuum on or off, press the [Power Button] icon.
2. Select your cleaning mode: Standard or TURBO.
3. Battery indicators ? show the remaining charge.
4. Run times: Up to 50 minutes in standard mode, up to 18 minutes in TURBO mode.
5. Attach desired accessories by pushing them firmly into place.
6. Move the vacuum cleaner across surfaces for cleaning ➡️.

Maintenance and Cleaning

Regular maintenance is key to optimal performance.

1. Emptying the Dustbin: Detach the dustbin and empty its contents into a trash receptacle.
2. Cleaning the Filter: Remove the filter, wash it under running water ?, and allow it to air dry completely for at least 24 hours ☀️ before reinserting.
3. Cleaning the Brush Roll: Remove the brush roll from the floor head, clear any debris, and reinstall it.

Important Notes

Always follow safety precautions ⚠️. The vacuum cleaner has an operating range of approximately 5 meters.