Tuya Smart 1080P IP Video Doorbell

Key Features

Resolution: 2 Megapixels, Full HD 1080P
Night Vision: IR CUT with no color deviation, Black & White night vision
Unlock: Power on/off unlock, adjustable unlock delay time
Indoor Monitor: 7-inch or 10.1-inch capacitive touch screen (1024*600 resolution)
Connectivity: Master indoor monitor connects via 2.4G WiFi (802.11 b/g/n)
Multi-device Support: Connect up to 4 outdoor doorbells and 6 indoor monitors. Indoor monitors can talk to each other.
Functionality: Take photo, record video, unlock, lock delay, motion detection, calendar, brightness/contrast/color adjustment.
Storage: External TF card for saving photos/videos, leaving messages.
App Integration: Supports up to 20 App users via Tuya Smart or Smart Life APP. Users can talk to visitors, take photos/videos, monitor, and unlock from anywhere. Push notifications for motion detection or calls.
Playback: Video recording after calls or motion detection.
Angle: 140° Horizontal Angle

Packing List

1x Outdoor Doorbell
1x Indoor Monitor (7-inch or 10.1-inch)
Screws and rubber plugs
Unlock cable
Hex screwdriver
Hanging plate (for indoor monitor)
DC cable
12V 2A Power Supply
Optional: Cat5E/Cat6/Cat6A cable, Remote control, POE injector

Specifications

Outdoor Doorbell (Model 1):

Camera: 2MP, 140° Horizontal Angle
Night Vision: IR CUT
Unlock Terminals: COM, NC, NO
Power Input: DC 12~36V, AC 8~24V, 12~15V, 48V POE
Components: Microphone, IR LEDs, Photoresistor, Speaker, Reset Button, Call Button

Outdoor Doorbell (Model 2):

Camera: 2MP
Power Input: DC 12V, 12~15V, 48V POE
Components: Microphone, Camera, IR LEDs, Photoresistor, Speaker, Call Button, Reset Button

Indoor Monitor:

Display: 7-inch or 10.1-inch Touch Screen (1024*600)
Storage: TF card slot
Power Input: 12V~15V, POE & 48V POE Port, 12V~15V Backup power supply
Dimensions: 7-inch (198*130*21mm), 10.1-inch (272*180*20mm)

Installation Diagram and Steps

Outdoor Doorbell Installation:

Mount the outdoor doorbell at a height of 1.4 to 1.7 meters, avoiding direct sunlight and rain.
Secure the doorbell to the wall, wooden board, or door using screws or tape. It can also be mounted on an 86-type junction box.
Drill holes for the Cat5e cable. Use anchors if mounting on brick or concrete.
Attach the rain cover to the wall using screws.
Route the Cat5e cable through the wall opening and connect it to the doorbell.
Fix the rain cover onto the doorbell and secure it with bottom screws.

Indoor Monitor Installation:

Fix the hanging plate to the wall using screws.
Insert a MicroSD card into the indoor monitor's TF card slot.
Connect the Cat5e cable to the indoor monitor.
Connect the power supply (12V~15V) if using a single outdoor doorbell and monitor setup.
Hang the indoor monitor onto the hanging plate.

Network Connection:

Connect the Cat5e cable from the outdoor doorbell to the indoor monitor.
For POE connections, connect the cable to a POE switch or via a POE injector connected to a router.
Maximum cable lengths are recommended: 80 meters for standard Cat5e, 100 meters for POE connections, and up to 120-150 meters with POE switches.
Ensure cameras are configured with appropriate IP addresses (e.g., 192.168.250.101-240) and gateway (192.168.250.1) before installation if required.

RFID Card Settings

The system supports RFID cards for access control. Default cards include 1 admin add card, 1 admin delete card, and 5 user cards (125KHz).

Set Admin Card: Enable ID card setting, swipe a card to set as admin add card, swipe a second card to set as admin delete card, then exit setting mode.
Add User Card: Swipe the admin add card, then swipe the user card to add it. Swipe the admin add card again to finish.
Delete User Card: Swipe the admin delete card, then swipe the user card to delete it. Swipe the admin delete card again to finish.
Delete All User Cards: Swipe admin add card, then admin delete card, then admin add card again.

Unlock Settings

The system supports connecting electric locks or magnetic locks.

Wiring Diagram: Connect the lock to the COM, NC (Normally Closed) or NO (Normally Open) terminals on the outdoor doorbell or an optional unlock controller, along with 12V power and GND.
Unlock Controller: An optional unlock controller can be used for magnetic locks.

Device Pairing

Pair Unlock Control with Smart Doorbell: Press the 'pair' button on the unlock control, then press the 'Unlock' icon on the app. Follow on-screen prompts to complete pairing.

Pair Remote Control with Unlock Control: Press the 'pair' button on the unlock control, then press the 'unlock' button on the remote control. Follow on-screen prompts to complete pairing.

Clear Pairing: Press and hold the 'pair' button on the unlock control for over 3 seconds.

System Connection Details

The Cat5e/Cat6 cable connects the doorbell and indoor monitor. Different connection methods are available:

Way 1 (Direct Power): Indoor monitor powered by 12~15V adapter, Cat5e cable connects doorbell to monitor (up to 80m).
Way 2 (POE Injector/Switch): Connect to router via POE injector or POE switch. Supports up to 100m with POE.
Way 3 (48V POE Switch): Supports up to 4 outdoor doorbells, 4 cameras, 6 indoor monitors, with cable lengths up to 150m.
Way 4 (Non-standard 12V/15V POE Switch): Supports up to 120m cable length.

Note: When connecting cameras, ensure they are configured with the correct IP address (e.g., 192.168.250.101-240) and gateway (192.168.250.1) via a PC before installation.

Indoor Monitor Operation

Access settings via the 'Settings' icon (⚙️).

1. System Settings:

Device ID: Set sequentially for master (1) and slave monitors (2-6).
Language: Select display language.
Date/Time: Set current date and time.
Factory Settings: Restore default configurations.
Software Update: Update system firmware.
SD Card: Check status and format.
Software Version: View current version.

2. Door Settings:

Door ID: Assign an ID to the door.
Unlock Delay: Set the duration for the unlock pulse (e.g., 2S).
Message: Configure message recording settings.
Motion Detection: Enable/disable and set sensitivity (Low/Medium/High/Off).
MD Preview Switch: Enable/disable preview for motion detection.
Ring Select: Choose from 10 ringtones.
Ring Volume: Adjust volume (0-9).
Ringback: Enable/disable ringback tone.

3. Camera Settings:

Connect and configure network cameras (Hikvision, Dahua, other brands).

Connecting Hikvision Cameras: Use SADP tool to activate the camera, set IP address (192.168.250.101-240) and gateway (192.168.250.1), set resolution (1920*1080P), video encoding (H.264), enable ONVIF, and add a username/password.
Connecting Other Network Cameras: Set IP address and gateway. Log in via IE to set resolution (1920*1080P) and video encoding (H.264/H.265X). Default password may be 123456.
Connecting Dahua Cameras: Use ConfigTool to initialize the device, set a password, search settings, set IP address (192.168.250.101-240) and gateway (192.168.250.1), set resolution (1920*1080P), and video encoding (H.264).
Adding Cameras to Monitor: After camera setup, search for cameras on the indoor monitor, select the camera, enter username and password, and click login. A green dot (?) indicates a successful connection.

4. Network Settings:

Configure the master indoor monitor's network connection (2.4G WiFi only).

EZ Mode: Connect to WiFi, then follow app prompts to pair.
AP Mode: Connect to the monitor's generated WiFi hotspot (SmartLife-XXXXXX, password 12345678), then follow app prompts.

5. Monitoring & Intercom:

Click 'Monitoring' or the call button on the outdoor doorbell.
Controls include: Monitor next doorbell, Take photo (?), Video (?), Unlock (?), Talk (?️), Hang up, Zoom in/out, Adjust volume.
A visitor icon (?) appears when someone calls. Calls can be transferred between indoor monitors.

6. Working Modes:

At home: Monitor rings, APP receives call/push. If unanswered, doorbell prompts to leave a message.
Not at home: Visitor prompted to leave a message, APP receives push.
Dormant: No ringtones or prompts on devices; APP receives the call.

App Integration (Tuya Smart / Smart Life)

1. App Download:

Search for "Tuya Smart" or "Smart Life" in the App Store or Google Play, or scan the QR code.

2. App Register & Login:

Register a new account or log in.
Create a home in "Home Management" to add devices. The user adding the device becomes the owner.
Up to 20 administrators or home members can be added. Shared users may not have unlock functionality.
Devices must be removed from the original account before binding to a new one.

3. Adding Master Indoor Monitor to App:

Only the master indoor monitor can be added to the app.

EZ Mode: Select "EZ Mode" in Network Settings. In the app, click '+', select "Add Manually" -> "Security & Video Surveillance" -> "Smart Doorbell", choose "EZ mode", confirm network configuration, select 2.4GHz WiFi, enter password, and wait for pairing.
AP Mode: Select "AP Mode" in Network Settings. The monitor will restart and display a hotspot "SmartLife-XXXXXX" (password: 12345678). In the app, select "AP Mode", check the box, click "Next", connect to the "SmartLife-XXXXXX" hotspot, then return to the app to complete pairing.

4. Motion Detection and Call Push:

Receive push notifications on your mobile phone for motion detection (? [Motion Detected]) or when someone rings the doorbell (? [Visitor Alert]). Access alarm messages or live video from notifications.

5. Live Video:

Click on the device in the app homepage to view live video. Controls include taking photos (?), talking (?️), video recording (?), unlocking (?), playback (▶️), and viewing albums (?️).

Device Settings within App:

Modify icon, name, location.
View IP address, ID, time zone.
Configure device automation, doorbell button light, screen mirroring (?).
Manage motion detection (enable/disable, sensitivity ?, time period ⏰).
Check and format memory card (??).
View alarm list (?).
Share device access with other users (?).
Remove device (?️).

Help and Service

Access "Service and Help" via the "Me" (?) tab in the app for:

Home Management (?)
Message Center (✉️) for alarm information
Help and Feedback (❓) for troubleshooting and guides.

	Standalone WiFi Doorbell Operation Instruction Manual This manual provides detailed operation instructions for the Standalone WiFi Doorbell, covering specifications, parameters, network settings, functions, app connection methods, administrator operations, user card management, and wiring diagrams.
	Smart WiFi Cube Indoor Camera JS-K218 - Product Specifications Detailed specifications and features of the JS-K218 Smart WiFi Cube Indoor Camera, including 1080P HD video, motion detection, two-way audio, and app connectivity for remote monitoring.
	Smart Valve Controller User Manual V2.0 User manual for the Smart Valve Controller V2.0, detailing product structure, parameters, installation, app connection, and remote control pairing.
	Tuya Smart Fall Down Detector WiFi v2.0 Quick Installation Guide Step-by-step instructions for installing and pairing the Tuya Smart Fall Down Detector WiFi v2.0 with the Tuya Smart app. Learn how to set up your device, connect to Wi-Fi, and position the sensor for optimal fall detection.
	Tuya Smart Pet Feeder 5G Instruction Manual Comprehensive instruction manual for the Tuya Smart Pet Feeder (Video 5G), covering setup, app installation, feeding schedules, troubleshooting, and maintenance.
	Smart Outdoor Camera User's Manual - Model IPC176 User's manual for the IPC176 Smart Outdoor Camera, covering setup, app usage, features, specifications, and FCC compliance.
	Tuya Smart Dinosaur Temperature Monitor WiFi Quick Installation Guide Quick installation guide for the Tuya Smart x Dinosaur Temperature Monitor WiFi ver.2.0, detailing app setup, device pairing, and usage instructions.
	Tuya Smart App V3.8.0 User Manual Comprehensive user manual for the Tuya Smart App version 3.8.0, covering app download, account registration, device management, control, smart features, and settings.