Bluetooth Pairing and Wearing
Bluetooth Pairing
- Pick up two earbuds from the charging case; they will power on and pair to each other automatically within 10 seconds.
- One of the earbuds' red and blue lights will blink alternately.
- Select "TOZO T10" from the device list in your Bluetooth settings.
Wearing
- Ensure the eartip is facing downwards, then place the earbuds into your ears.
- Rotate the earbuds back towards the auricle side to fit snugly.
*Eartip facing upwards is the incorrect way to wear the earbuds.
Correct Wearing
- Ensure the eartip is facing downwards.
- Rotate the earbuds back to the auricle side to fit snugly.
Wrong Wearing
*Eartip facing upwards is the incorrect way to wear the earbuds.
Smart Touch Control
X1: Press once | X2: Press twice | X3: Press three times | Hold: Press and hold for 2 seconds
Previous Song (L Earbud)
Action: X2 (Press twice)
Next Song (R Earbud)
Action: X2 (Press twice)
Volume Down (L Earbud)
Action: Hold (Press and hold for 2 seconds)
Volume Up (R Earbud)
Action: Hold (Press and hold for 2 seconds)
Play/Pause (L/R Earbud)
Action: X1 (Press once)
Answer Call (L/R Earbud)
Action: X1 (Press once)
Hang Up Call (L/R Earbud)
Action: Hold (Press and hold for 2 seconds)
Reject Call (L/R Earbud)
Action: Hold (Press and hold for 2 seconds)
Activate Voice Assistant (L/R Earbud)
Action: X3 (Press three times)
Power On/Off
Power On
Take the earbuds out of the charging case, or press and hold for 3 seconds.
Power Off
Place the earbuds back into the charging case, or press and hold for 5 seconds.
Reset
If only one earbud works, or if they fail to pair with each other, follow these reset steps:
- Delete all "TOZO T10" Bluetooth records on your phone, then turn off Bluetooth.
- Pick up both earbuds from the charging case, then quickly click both earbuds twice.
- The reset is complete when the blue light flashes rapidly, and then one earbud's red and blue lights blink alternately.
NOTE: If the connection is unsuccessful with your devices, please delete all historical records of "TOZO T10" and try the pairing process again.
Charging
Place the case upright on a wireless charger (wireless charging pad not included).
Alternatively, charge the case via the USB-C connector (USB-C cable included).
Battery Level Indicators:
- •* : 0%~25%
- **• : 25%~50%
- ***• : 50%~75%
- **** : 75%~100%
Warning: Do not put wet earbuds into the charging case. Fully dry off the earbuds before charging.
Warning: Do not place the case face up or face down during charging.