Blaupunkt VIO-D40 IP Camera Quick Start Guide

1. Kit Content

The package includes:

• VIO-40 IP Camera: A white dome-shaped IP camera with a Blaupunkt logo.
• Antenna: A white, slender antenna.
• Quick Start Guide: An icon representing an open book with a wrench.
• Power Supply EU type: A white power adapter with a plug and cable.
• 3 wall screws / 3 plastic anchors: An image showing three screws and three wall anchors.
• Mounting map sticker: A circular sticker with crosshairs and markings for drilling.

NOTE: This manual is for reference only. Slight differences may be found in the user interface. Designs and software are subject to change without prior written notice. All trademarks are the property of their respective owners.

2. Product Description

The camera features the following parts:

1. Dome cover
2. Dome housing
3. Camera Power connector
4. Ethernet Network port
5. Wireless antenna
6. Waterproof ring
7. Reset button
8. Micro SD card slot
9. Indicator light 1
10. Indicator light 2

Indicator LED Status and Camera Status:

NOTE: This quickstart guide explains the installation and registration of the VIO camera. For more details, please check chapter 6.

3. Learn in a Camera (Setup)

1. Download and install the “Cam4Home Plus" APP from your smartphone's App Store.
2. Connect your smartphone to your Wi-Fi network.

NOTE: If using a dual-band router, ensure your smartphone is connected to a 2.4 GHz WiFi Network, not a 5GHz Wifi Network. Refer to your router manual for details.

3. Open the “Cam4Home Plus" APP. Create a user account by pressing the "sign up" button.
4. Add a new camera by tapping the "+" button and scanning the camera's QR code (refer to chapter 2). Follow the app's instructions to complete registration.

NOTE: For registration issues, refer to Chapter 5.

4. Cam4Home Plus Management

Camera Dashboard:

Access the camera dashboard from the main "device" menu to view the live stream.

Camera Settings:

Navigate to the camera dashboard and tap the settings icon ⚙️.

Push Notifications:

In the device menu, tap the 3 dots icon ••• and select "Alarm Notifications" ?. Tap the "Alarm Notification" button to enable/disable notifications.

Important: Ensure you have granted the app permission to display pop-up notifications.

Motion Detection:

To enable/disable motion detection: Camera dashboard --> Settings icon ⚙️ --> Arm settings --> Motion detection. Motion detection is enabled by default.

Video Storage:

Local video recording requires a Micro-SD card (see chapter 5.1) or an activated Cloud Storage Plan.

NOTE: Motion detection must be enabled to receive push notifications.

5. Installation

Check your WiFi signal strength at the camera's location. For optimal performance, your smartphone should be connected to the same Wi-Fi network.

Note: Photograph the label on the back of the camera for serial number, MAC address, or QR-Code reference.

5.1. Micro SD Installation (Optional)

Locate the Micro SD-Card compartment (chapter 2, point 8). Slide the card slot to the OPEN position, insert the Micro-SD card, and slide it back to the LOCK position.

NOTE: A Micro SD-Card is mandatory for local recording. Ensure it is CLASS10 rated (8GB to 256GB).

5.2. Installation Without Mounting Bracket

1. Choose an installation location near a power socket. Turn on the camera and use the app's live view to position it for optimal monitoring.
2. Use the included hex wrench to open the dome cover by unfastening three inner hex screws.
3. Stick the mounting map sticker onto the ceiling or wall.

Diagram of camera parts with labels:

• 1. Antenna
• 2. U-shaped side exit
• 3. Rotational Bracket
• 4. LED Ring
• 5. Ceiling or Wall
• 6. Plastic Anchor
• 7. Dome Pedestal
• 8. Installation Screw
• 9. Dome Cover
• 10. Inner Hex Wrench

4. Use the mounting map sticker to mark drilling points: three for screws, one large hole for Ethernet port and power connector.
5. Drill the marked points and install plastic anchors. Choose cable exit option:
   • For rear exit: Drill a hole matching the large marking on the sticker (ideally SDS-max 20mm drill).
   • For side exit: Route cables through the U-shape side exit on the dome pedestal.

   NOTE: If a 20mm hole is not feasible (e.g., concrete wall), the Ethernet port can be cut off (see Chapter 2) and sealed. This requires a 12mm drill. Warning: Cutting the Ethernet port disables wired connection and may void the return right.

6. Align the dome camera with the sticker and fix screws into the anchors.
7. Adjust the camera lens using the rotation bracket (355° horizontal, 64° vertical). Ensure the LED ring is not blocked by the housing.

Note: When rotating vertically by 64°, pay attention to image rotation to avoid IR light blockage.

8. Secure the dome housing to the pedestal with the inner hex screws.
9. Connect the camera power connector to the power supply cable and plug into a socket. Optionally, connect via Ethernet cable to the router.

5.3. Installation with Mounting Bracket (Optional)

The VIO-DMB1 mounting bracket is an optional accessory. Refer to the bracket's manual for installation.

6. Help

6.1 FAQ

Check the in-app FAQ: Menu "Me" --> Settings --> FAQ.

6.2 Cam4Home Plus Manual

Download the manual from blaupunkt.com/service. Select language, "VIO-Series", and "Manual", then click "Submit" to find "VIO-- Cam4Home Plus - Manual".

6.3 How to Videos

Visit the YouTube channel by scanning the QR code for installation and registration videos. Select your language.

6.4 Customer Support and Returns

For support, visit security.blaupunkt-service.com. For returns, delete linked cameras from your account first.

6.5 Factory Reset

1. Connect the camera and wait 1 minute for it to boot.
2. Press the reset button (chapter 2) for 15 seconds until the red LED lights up and flashes.
3. Wait for the green indicator light to flash slowly.
4. The camera is now reset to factory settings.

Technical Specifications

• Image sensor: 1/3" 4 Megapixel progressive CMOS
• Resolution: 2304×1296
• Video: H.264 encoding 20fps@4M(2304x1296) & 25/30fps@2M (1920×1080)
• Lens: 2.8mm F2.0
• Angle of View: Horizontal 100°, Vertical 55°
• Digital Zoom: 16x
• Minimum Illumination: 0.1Lux(Color), 0Lux(B/W)
• Wireless Interface: Wi-Fi(IEEE802.11b/g/n), 50m (open field)
• IR LEDs: 24
• Power Input: DC12V
• Operating Temperature: -20°C ~ +50°C
• Operating Humidity: Up to 95% non-condensing
• Ingress Protection: IP67
• Dimensions: 109.9 x 109.9mm x 81mm
• Video stream encryption: TLS