Bubble Fish Lamp

Warnings

• Use the lamp indoors only.
• Before connecting to the mains, check that the voltage indicated on the rating plate matches your electrical installation.
• Do not pull on the cord; pull on the plug to disconnect the lamp.
• Do not touch the base of the lamp with wet hands.
• Install the lamp away from moisture, flammable materials, and heat sources.
• The lamp is not a toy. Keep out of reach of children and pets.
• Do not leave the lamp unattended.
• Do not place the lamp where it could be unsafe for young children if they accidentally pull the power cord.
• Do not attempt to open or repair the lamp yourself. Electrical parts must be serviced by a qualified electrician or specialized workshop.
• Do not modify, open, disassemble, puncture, or repair the base of the lamp.
• Do not use if the USB cable is damaged. All repairs must be carried out by a qualified technician.
• Do not cover the lamp when it is switched on.
• Handle the product with care. Avoid blows, shocks, or falls, as these can cause damage.
• If not using the lamp for an extended period, remove the cable from the outlet.
• Keep the lamp away from direct sunlight.
• DO NOT drink the contents of the container. DO NOT eat the jellyfishes.
• The LEDs are not replaceable.

Specifications

• Power source (USB cable included): 5V, 1A
• LED: 6 pieces (0.25W for each)

Operation

Included Items

• USB cable (x1)
• Bubblefishes (x 6)
• Tank (x1)

Before Filling the Container

1. Before first use, carefully remove the container from the packaging.
2. Check that it is not damaged. If the glass is cracked, do not use it.
3. Place the lamp on a flat, dry, stable, secure, and non-slippery surface that can reliably withstand the weight of the lamp once filled.

Filling Up the Container

1. Open the top lid.
2. Pour clean water into the tank, leaving approximately 1cm from the rim to the water level.
3. Place the fishes into the tank. It is recommended to let the small fishes soak in the water for a day prior to use.
4. Close the top lid. Plug one end of the USB cable into the lamp's USB port and the other end into a compatible adapter (5V 1A max, not included).

Change the water occasionally if it becomes cloudy or dirty.

Lamp Operation

Important Note: If using batteries as a power source, insert them before filling the container.

1. Press the button to turn on the LEDs. The light color will change automatically.
2. Press the button repeatedly to cycle through 7 lighting colors. Stop pressing when you reach your desired color.
3. Pressing the button for the eighth time will turn the lamp off.

Using the Remote Control

• 1. Increase brightness
• 2. ON
• 3. OFF
• 4. Reduce brightness
• 5. Five main colors (Red, Green, Blue, Yellow, White)
• 6. Color switching frequency control (Flash, Strobe, Fade, Smooth)
• 7. RGB colors

Color Modes:

• Flash Mode: Activates a sequence of seven colors displayed one after another.
• Strobe Mode: Displays 7 flashing and changing colors. Red, green, and blue are primary colors from which other luminous colors evolve.
• Smooth Mode: The lamp smoothly transitions through 7 colors.
• Fade Mode: A transition of 7 colors fading from lightest to darkest, creating a smooth gradient effect.

Cleaning

• DO NOT IMMERSE THE LAMP IN WATER OR ANY OTHER LIQUID.
• DO NOT USE ABRASIVE OR CLEANING AGENTS.
• Before cleaning or maintenance, turn off the lamp, unplug it, and let it cool for a few minutes.
• Clean the exterior surface with a soft, dry, lint-free cloth. For heavy dirt, use a cloth slightly moistened with water, then wipe dry.
• Avoid the USB power port during cleaning; do not let water enter.
• Change the water occasionally if it becomes cloudy or dirty.
• Keep the lamp away from dust, moisture, and extreme temperatures.

Disposal Information

ATTENTION: Do not dispose of this device with your household waste. Your local authorities provide a selective collection system for such products. Please contact your local municipality for information on collection points. Electrical and electronic products contain hazardous substances that can negatively affect the environment or human health and must be recycled.

The symbol ? (a waste container on wheels crossed out with an X symbol) indicates that electrical and electronic equipment must be collected separately.