Walrus Audio Canvas Rehearsal
Your All-In-One Rehearsal Utility
Welcome to Canvas Rehearsal
Thanks for choosing the Canvas Rehearsal as your all-in-one rehearsal utility. Simply connect it to the end of your pedal chain, plug in some headphones, and you're ready to rehearse!
Getting Started
To get started, simply set your tempo by tapping it in or use the encoder to dial in a specific BPM. Press the Start/Stop switch to turn the metronome on and off.
Use the Guitar, Click, and AUX knobs to mix levels to taste. The Headphone volume knob will then adjust the overall mix.
Practice Along with Tracks
Want to practice along with a song? Use the 1/8" Auxiliary input or pair the Rehearsal with a Bluetooth enabled device to play along with a track.
Power Requirements
The Canvas Rehearsal requires a 9 volt DC power supply with a Center Neg. polarity and a minimum current draw of 300mA.
An isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Resources and Support
For the full manual, to register your pedal, watch videos, and more, please refer to resources available via the Walrus Audio website.
This product comes with a limited lifetime warranty.
For repairs, questions, or general advice, contact Walrus Audio support via email at help@walrusaudio.com. A member of the Walrus Audio team is available to assist you.
Product Description
The Walrus Audio Canvas Rehearsal is a compact audio effects pedal designed for musicians. It functions as an all-in-one rehearsal utility, providing a built-in metronome with adjustable tempo and meter. It allows users to mix the levels of their guitar signal, the metronome click, and an auxiliary audio source (via 1/8" input or Bluetooth). The pedal also features a headphone output with a master volume control for silent practice. The unit is powered by a standard 9V DC center-negative power supply.
Connect with Walrus Audio