R. STAHL Cable Gland CMP-40A2FRC
Article Number: 243630
Product Overview
The CMP-40A2FRC is an Ex d and Ex e metal cable gland designed for all types of unarmored cables and cables with metallic braid armor in flexible conduits. It provides sealing on the outer cable sheath via a self-sealing, explosion-proof gland seal. The cable gland is certified according to international standards including IECEx, ATEX, and CSA. A freely rotating connection facilitates installation, and the glands are designed to prevent cold flow.
Technical Specifications
Explosion Protection
| Feature | Specification |
|---|---|
| Ex Version | Ex eb & Ex db & Ex nR & Ex ta |
| Application Zone | 1, 2, 20, 21, 22 |
| IECEx Gas Certificate | IECEX CML 18.0179X |
| IECEx Gas Explosion Protection | Ex db eb IIC Gb |
| IECEx Dust Certificate | IECEX CML 18.0179X |
| IECEx Dust Explosion Protection | Ex ta IIIC Da |
| IECEx Grisou Certificate | IECEX CML 18.0179X |
| IECEx Anti-Vapor Safety Certificate | IECEX CML 18.0179X |
| IECEx Vapor Safety | Ex nR IIC Gc |
| ATEX Gas Certificate | CML18ATEX1321X |
| ATEX Gas 2 Certificate | CML18ATEX4313X |
| ATEX Gas Explosion Protection | II 2 G Ex db eb IIC Gb |
| ATEX Dust Certificate | CML18ATEX1321X |
| ATEX Dust Explosion Protection | II 1 D Ex ta IIIC Da |
| ATEX Grisou Certificate | CML18ATEX1321X |
| ATEX Anti-Vapor Certificate | CML18ATEX1321X |
| ATEX Vapor Safety | II 3 G Ex nR IIC Gc |
| Note | Product attestations and certificates can be downloaded from the manufacturer's homepage (www.cmp-products.com). |
Mechanical Characteristics
| Feature | Specification |
|---|---|
| Version | 40 |
| Strain Relief Device | No |
| Ingress Protection (IP) | IP66 |
| Ingress Protection (IP) UL | IP66 |
| Seal Material | SOLO LSF |
| Silicone-Free | Yes |
| Halogen-Free | Yes |
| Clamping Range | 23.5 - 32.2 mm |
| Armor Type | Cable with protective braid |
| Clamping Range (Armor) | 23.5 - 32.2 mm |
| Construction Type | BS 6121, CEI/EN 62444 |
| Overall Height | 55 mm |
| Flat Width | 50 mm |
| Thread Size | M40 |
| Thread Length | 15 mm |
| Thread Pitch | 1.5 |
| Thread Standard | Metric |
| Connection Size | 40 |
| Inner Sheath | 23.5 - 32.2 mm |
| Internal Conduit Thread | M40 |
| Protrusion Length | 57.7 mm |
| Impact Resistance (CEI 60079) | 7 J |
| Impact Resistance | 20 J |
| Nipple (PVC) | PVC13 |
| Weight | 330 g |
| Weight | 0.73 lb |
Dimensional Drawing
A dimensional drawing is provided, illustrating the following key dimensions:
- A: Inner Sheath
- C: Thread Size
- D: Overall Height
- D: Flat Width
- E: Thread Length
- F: Protrusion Length
- G: Internal Conduit Thread
Note: Dimensions are in mm [inches]. Subject to modifications in technical characteristics, dimensions, weights, construction types, and delivery possibilities. Figures are for indicative purposes only.
