R. STAHL CMP-50A2FRC Cable Gland
Article No. 243632
Product Description
The CMP-50A2FRC cable gland is designed for all types of unarmored cables and cables with metallic braid armor, suitable for use in flexible conduits. It offers sealing on the outer cable jacket via a flameproof sealing gasket and holds international certifications from IECEx, ATEX, and CSA.
This cable gland is suitable for Ex d and Ex e applications and is designed to prevent cold flow. The swivel connection facilitates installation.
Technical Specifications
Explosion Protection
| Feature | Specification |
|---|---|
| Ex Version | Ex eb & Ex db & Ex nR & Ex ta |
| Application Areas (Zones) | 1, 2, 20, 21, 22 |
| IECEx Gas Certificate | IECEX CML 18.0179X |
| IECEx Gas Explosion Protection | Ex db eb IIC Gb |
| IECEx Dust Certificate | IECEX CML 18.0179X |
| IECEx Dust Explosion Protection | Ex ta IIIC Da |
| IECEx Griso Certificate | IECEX CML 18.0179X |
| IECEx Anti-Vapor Safety Certificate | IECEX CML 18.0179X |
| IECEx Vapor Safety | Ex nR IIC Gc |
| ATEX Gas Certificate | CML18ATEX1321X |
| ATEX Gas 2 Certificate | CML18ATEX4313X |
| ATEX Gas Explosion Protection | II 2 G Ex db eb IIC Gb |
| ATEX Dust Certificate | CML18ATEX1321X |
| ATEX Dust Explosion Protection | II 1 D Ex ta IIIC Da |
| ATEX Griso Certificate | CML18ATEX1321X |
| ATEX Anti-Vapor Certificate | CML18ATEX1321X |
| ATEX Vapor Safety | II 3 G Ex nR IIC Gc |
| Note | Product attestations and certificates can be downloaded from the manufacturer's homepage (www.cmp-products.com) |
Mechanical Characteristics
| Feature | Specification |
|---|---|
| Version | 50 |
| Tension relief device | No |
| Degree of protection (IP) | IP66 |
| Degree of protection (IP) UL | IP66 |
| Seal Material | SOLO LSF |
| Silicone-free | Yes |
| Halogen-free | Yes |
| Clamping Range | 35.6 - 44 mm |
| Armor Type | Protective braid cable |
| Clamping Range (Armor) | 35.6 - 44 mm |
| Construction Type | BS 6121, CEI/EN 62444 |
| Angle Dimension | 66 mm |
| Flat | 60 mm |
| Thread Size | M50 |
| Thread Length | 15 mm |
| Thread Pitch | 1.5 |
| Thread Standard | Metric |
| Connection Size | 50 |
| Inner Sheath | 35.6 - 44 mm |
| Internal Conduit Thread | M50 |
| Protrusion Length | 64.4 mm |
| Impact Resistance (IEC 60079) | 7 J |
| Impact Resistance | 20 J |
| PVC Nipple | PVC18 |
| Weight | 440 g |
| Weight | 0.97 lb |
Overall Dimensions (all dimensions in mm [inches])
A diagram illustrating the overall dimensions is provided, showing:
- A: Inner Sheath
- C: Thread Size
- D: Angle Dimension
- D: Flat
- E: Thread Length
- F: Protrusion Length
- G: Internal Conduit Thread
Note: Dimensions are subject to change. Figures are for indicative purposes only.
