WIFI Thermometer Hygrometer User Instructions
Introduction
This section provides an overview of the WIFI Thermometer Hygrometer.
Key Display Elements: WiFi Signal (?), Temperature (?️), Time (⏰), Power Level (?), Humidity (?).
Device Components: Pairing Button, Battery Compartment, Rear Cover.
Pairing Settings
Step 1: Power On
Step 2: Enter Pairing Mode
Press and hold the middle button for 5 seconds. The device enters pairing mode, indicated by the signal icon (?) flashing.
Reminder: Pairing takes approximately 120 seconds.
Installation
Simply place the device wherever you want.
Mobile App
Search for the 'Smart Life' app on the iOS App Store or Google Android market. Register an account with the app before use.
(QR code for app download is excluded from this document).
*App version subject to change without prior notice.
Pairing Procedure
Follow these steps to pair the device with your smartphone:
- Power on the device.
- Ensure the signal icon (?) is flashing. If not, press and hold the middle button until you hear two beeps (??), then the device enters pairing mode.
- Make sure your smartphone is connected to a WiFi network (Bluetooth is recommended to be enabled).
- Open the 'Smart Life' mobile app and tap the '+' icon in the upper right corner.
- Follow the on-screen instructions in the app to pair the device.
You will hear a long beep (?...) when pairing is successfully finished.
Time Display
The device automatically syncs the time when connected to a WiFi network.
The display cycles through the following items sequentially each time you press the middle button:
- HOUR: MINUTE
- MINUTE: SECOND
- YEAR
- MONTH DAY
- DAYS OF THE WEEK
- BACK TO 1
Warning Temperature & Humidity Display
(APP control also supported)
Pressing the left button cycles through the following temperature-related displays:
- 1. Warning value of temperature (high)
- 2. Warning value of temperature (low)
- 3. Current temperature
- 4. BACK TO 1
Pressing the right button cycles through the following humidity-related displays:
- 1. Warning value of humidity (high)
- 2. Warning value of humidity (low)
- 3. Current humidity
Setting Warning Values
Setting Warning Temperature Value
(APP control also supported)
- Press the left button, then press the middle button to enter setting mode for warning temperature.
- Press the left button to increase the warning value by 1 unit each time, or press and hold it to increase the value continuously.
- Press the right button to decrease the warning value by 1 unit each time, or press and hold it to decrease the value continuously.
- Press the middle button to save the settings.
- If no buttons are pressed for 5 seconds, the device will exit setting mode automatically.
Setting Warning Humidity Value
(APP control also supported)
- Press the right button, then press the middle button to enter setting mode for warning humidity.
- Press the left button to increase the warning value by 1 unit each time, or press and hold it to increase the value continuously.
- Press the right button to decrease the warning value by 1 unit each time, or press and hold it to decrease the value continuously.
- Press the middle button to save the settings.
- If no buttons are pressed for 5 seconds, the device will exit setting mode automatically.
Specifications
- Power source: 4.5VDC (3x 1.5VDC AA battery ???)
- Working current: <100mA
- Standby current: <30μA
Warranty Information
Warranty Policy
- Consumers are eligible for return, replacement, or repair service within 5 days of purchase for manufacturing-caused performance malfunctions.
- Consumers are eligible for repair service within TWO months of purchase for manufacturing-caused performance malfunctions.
Warranty Exemption
This warranty does not cover:
- Absence of a warranty card or expired warranty period.
- Damages caused by operation and maintenance not in accordance with the product instructions.
- Damages caused by unauthorized dismantling and repairing.
- Damages caused by acts of God.
- Natural fading and wear of the product under normal usage.
User Information Forms
The following sections are for providing user and product information, typically for after-sales service or warranty claims.
For Users
User Information
Name: _________________________
Phone: _________________________
Email: _________________________
Zip Code: _________________________
Address: _________________________
Product Information
Product Name: _________________________
Product Model#: _________________________
Color: _________________________
Packaging#: _________________________
Service Requested
☐ return ☐ replacement ☐ repair
Problem Descriptions: ____________________________________________________
Warranty Request Date: _________________________
Authorized Signature: _________________________
For Manufacturer
User Information
Name: _________________________
Phone: _________________________
Email: _________________________
Zip Code: _________________________
Address: _________________________
Product Information
Product Name: _________________________
Product Model#: _________________________
Color: _________________________
Packaging#: _________________________
Service Requested
☐ return ☐ replacement ☐ repair
Problem Descriptions: ____________________________________________________
Warranty Request Date: _________________________
Authorized Signature: _________________________
