User Manual
Product Overview
The Tuya ZigBee intelligent on-off device is a new intelligent switch designed based on the ZigBee 3.0 protocol. Users can match it with other intelligent devices to achieve whole-house intelligence according to their needs. It offers advantages such as simple operation, high stability, strong anti-interference ability, and small power loss.
Diagram description: A circular button is depicted with an indicator light in the center. The button is labeled 'Button' and the light is labeled 'Indicator Light'.
Product Specifications
- Input: AC 100-240V 50/60Hz 10A/16A Max
- Output: AC 100-240V 50/60Hz 10A/16A Max
- Wireless Tape: Zigbee 3.0
- Material: PC VO
- Product Size: 41x41x20mm
Installation Method
Please wire the device according to the marking on the cover.
ON/OFF Operating Principle: The connected appliances work or stop through the live wire power being switched on or off. The device must be powered by L (Live) and N (Neutral).
Wiring Diagram Description: A diagram shows terminal connections labeled Lout, Nout, L, N, S1, S2. It illustrates the device connected to L and N for power, and to Lout and Nout for the load. A switch is shown connected to terminals S1 and S2.
Warning: S1 and S2 can only be connected to the two ends of the wall switch and cannot be connected to a strong current such as a zero live wire.
Wiring Diagrams
The wiring for 1 way control
Diagram description: Shows a single-way switch connected to S1 and S2 of the device. The device's L and N terminals are connected to the power supply, and Lout and Nout are connected to the load (represented by a light bulb symbol).
The wiring for other home appliances
Diagram description: Shows the device connected to L and N for power. Lout and Nout are connected to an appliance (represented by a fan symbol). The device's S1 and S2 terminals are connected to a switch.
The wiring for 2 way control
Diagram description: Illustrates two 2-way switches connected to the device's S1 and S2 terminals. The device is powered by L and N, and its Lout and Nout terminals are connected to the load (represented by a light bulb symbol).
Installation Method Access Settings
Note: Before adding this device, you need to add a ZigBee intelligent gateway.
- Connect the equipment to the power supply and connect the wires according to the wiring diagram.
- Long press the on-off switch button. The indicator light flashes and enters the network distribution mode. After the network is successfully configured, the network distribution indicator goes out.
- Open the "Tuyasmart" App, click the "+" sign in the upper right corner of the homepage, click to add a sub-device on the Zigbee gateway, and select the Zigbee switch. Follow the prompts to complete the addition.
