What's in the Box
The box contains the following items:
- Headset
- AC charger
- Earloop
- Eartips
Diagram description: A diagram shows the headset, AC charger, earloop, and eartips.
Headset Overview
The headset features the following components:
- Power button (⏻)
- Call button (?)
- Charge port (?)
- Headset LED (indicator light) (?)
- Volume/Mute button (?/?)
Diagram description: A diagram illustrates the headset with labels pointing to the Power button, Call button, Charge port, Headset LED indicator light, and Volume/Mute button.
Pairing
Pair First Time
The first time you power on your headset, it begins the pairing process.
- Put the headset on and turn it on.
- For iPhone and Android™ Smartphones: Follow the voice-guided pairing instructions.
- For Other phones: Use your phone's menu to activate Bluetooth® on your phone and set it to search for new devices while the headset LEDs are flashing red and white.
- Select "PLT_M165."
- If your phone asks, enter four zeros (0000) for the passcode or accept the connection. The indicator light stops flashing red and white once successfully paired.
Pair Another Phone
Multipoint technology lets you pair a second phone and answer calls from either phone.
- Power on your headset.
- Press and hold the Call button (?) until the indicator light flashes red and white or you hear "pairing."
- While the indicator light flashes red and white, activate Bluetooth on your phone and set it to search for new devices.
- Select "PLT_M165."
- If your phone asks, enter four zeros (0000) for the passcode or accept the connection. The indicator light stops flashing red and white once successfully paired.
Charge
Your new headset has enough power to pair and make a few calls. It takes two hours to fully charge the headset; the indicator light turns off once charging is complete.
Diagram description: A diagram shows the headset connected to an AC charger.
Fit
Adjust the Fit
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear.
- Rotate the eartip on the headset or add the optional clip-on earloop to adjust the fit.
- Replace the gel eartip with one of the two alternate sizes, if it feels loose or tight in your ear.
Diagram description: Two diagrams illustrate adjusting the fit: one shows rotating the eartip or adding an earloop, and the other shows replacing the gel eartip with a different size.
The Basics
Make/Take/End Calls
Answer a call: Tap the Call button (?).
Answer a second call: First, tap the Call button (?) to end the current call, then tap the Call button (?) again to answer the new call.
End a call: Tap the Call button (?) to end the current call.
Reject a call: Say "ignore" after the call is announced, or press and hold the Call button (?) for 2 seconds.
Call back last call: To dial your last number, double-tap the Call button (?).
Voice dial (phone feature): Press the Call button (?) for 2 seconds, wait for the phone prompt, and then tell the phone to dial the name of a stored contact.
Mute
You can mute the microphone during a conversation. During a call, tap the Volume/Mute (?/?) button until you hear "mute on" or "mute off." While the microphone is muted, an alert repeats every 15 minutes.
Adjust the Volume
Tap the Volume/Mute (?/?) button to cycle through preset levels.
Stream Audio
Streaming audio is controlled using your phone. When a call rings, the audio automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the streaming audio is resumed.
More Features
Save Power
If your headset is powered on but out of range of your paired phone for more than 90 minutes, it will conserve battery power by entering a DeepSleep™ mode. Once back in range, tap the Call button (?) to exit DeepSleep mode. If your phone is also ringing, tap the Call button (?) again to answer your call.
Decipher the Lights
Your headset has an indicator light (?) that flashes in response to status changes or after a button press. Examples include:
- Solid red until charging complete, then off.
- Flashing red and white during pairing.
- Triple red flash when less than 10 minutes of talk time remain.
- Triple white flash at incoming call.
Hear it Whisper
Your headset provides voice alerts in English for status changes, such as:
- "Power on"
- "Pairing successful"
- "Talk time (x) hours"
- "Mute on"
- "Lost connection"
- "Recharge headset"
Disable Voice Commands
This headset only speaks and understands English. If you prefer to use the Call button (?) to answer or reject calls, you can disable the voice commands "answer" or "ignore." With the headset powered on, simultaneously press the Call (?) and Volume (↔) buttons until the indicator light flashes white two times. Repeat these steps to reactivate the commands.
Technical Specifications
| Feature | Specification |
|---|---|
| Talk time | Up to 7 hours* |
| Standby time | Up to 11 days* |
| Headset weight | 7 grams |
| DeepSleep technology | Activates when paired headset is out of range for over 90 minutes; Provides up to 180 days* of battery readiness. |
| Multipoint technology | Use one headset to answer calls from either of two paired Bluetooth phones. |
| Charge connector | Micro USB charging |
| Battery type | Rechargeable, non-replaceable lithium-ion polymer |
| Charge time (maximum) | 90 minutes for full charge |
| Headset battery meter | On-screen for iPhone, enabled by Find MyHeadset™. |
| Bluetooth version | v3.0 |
| Bluetooth profiles | Advanced Audio Distribution Profile (A2DP), Wideband Hands Free (HFP) Profile 1.6 and Headset (HSP) Profile 1.2 |
| Operating and storage temperature | 32°F–104°F (0–40°C) |
NOTE: * Performance is dependent upon battery and may vary by device.
Need More Help?
Visit: www.plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
© 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners.
Patents US 5,712,453; Patents Pending
89142-06 (10.12)
