j5create JUPW3515 Qi2 3-in-1 Magnetic Portable Wireless Charging Station

Features

• Certified with advanced Qi2 wireless charging technology, offering iPhone® 12 series or later up to 15W of fast charging.
• Android™ phones, with the ability to attach to the magnetic charging pad, can charge wirelessly with up to 15W fast charging.
• 3-in-1 wireless charging station, charging your smartphones, Apple Watch®, and AirPods® or WPC-compliant wireless charging earbuds at the same time.
• Doubles as a phone stand with adjustable viewing angles for personalized comfort.
• Features a foldable design for convenience, perfect for travelers.
• Compatible with all Qi™, Qi2 and later, Qi2-ready protocol devices.

LED Indicator

• Connected to power: Blue LED lights up for 2 seconds and turns off.
• Standby state: Blue LED light stays off.
• Actively charging device(s): Blue LED lights up.
• Device(s) fully charged: Blue LED lights up.
• Advanced Multi Protection: FOD (Foreign Object Detection) / OVP (Over Voltage Protection) / OCP (Over Current Protection) / SCP (Short Circuit Protection) / OTP (Over Temperature Protection). Blue LED light flashes until the abnormal situation is dismissed (Frequency: 2Hz).

Charging Time Estimates

• iPhone® 15 Pro Max (Approx. 4422mAh): 2 hours 53 minutes
• iPhone® 15 (Approx. 3394mAh): 3 hours 20 minutes
• iPhone® 14 Plus (Approx. 4325mAh): 2 hours 47 minutes
• Samsung S24+ (Approx. 4000mAh): 3 hours 58 minutes

Compatibility

• Phones compatible with Qi2
• iPhone® 15 Series, iPhone® 14 Series, iPhone® 13 Series, iPhone® 12 Series
• Earbuds: AirPods® Pro 2/Pro/3/2, or other earbuds that support wireless charging
• Apple® Watch®: Series 9/Ultra 2/Ultra/8/7/SE/6/5/4/3/2/1

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement

This device complies with Industry Canada licence-exempt RSS standards.

Operation is subject to the following two conditions:

• (1) This device may not cause interference, and
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003(B) / NMB-003(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage; et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Déclaration d'exposition aux radiations: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux radiofréquences. L'appareil peut être utilisé en condition d'exposition portable sans restriction.

Limited Warranty

j5create offers a limited 2-year warranty. User's wear & tear damage is not included. To obtain warranty service, contact j5create customer service with the defect information of the product to get a return authorization number. Users are responsible for one-way return freight cost, and j5create will cover the one-way freight back. Please have the following information ready when contacting service:

• A copy of the original purchase invoice to verify your warranty.
• A product serial number.
• A description of the product and the issue.
• Customer's name, address, and telephone number.

j5create does not warrant that the operation of the product will be uninterrupted or error-free. j5create is not responsible for damage arising from failure to follow instructions relating to the product's use. This warranty does not apply to:

• Consumable parts, unless damage has occurred due to a defect in materials or workmanship.
• Cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports.
• Damage caused by use with non-j5create products.
• Damage caused by natural disasters.
• Damage caused by human misuse (lost, accident, abuse, misuse, or other external causes).
• Damage caused by operating the product outside the permitted or intended uses described by j5create.
• Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of j5create or a j5create Authorized Service Provider.
• A product or part that has been modified to alter functionality or capability without the written permission of j5create.
• If any j5create serial number on the product has been removed or defaced.

If a serial number is removed or defaced, j5create will calculate the cost of materials and repair for your reference.

This warranty is given by j5create in lieu of any other warranties expressed or implied.

Warranty support only applies when the covered product is located within the country in which j5create originally sold the system. If you need support for the product outside of the country of origin (e.g., while traveling, or if the system has been relocated to a new country), j5create may offer other support options for an additional charge.

For more information, please visit http://www.j5create.com.

Copyright © 2024 j5create. All rights reserved. All trade names are registered trademarks of their respective owners. Features and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.

RoHS Compliance

The product contains restricted substances as follows:

Specifications

• Model: JUPW3515
• Qi2 Standard
• Operating Temperature: -10 to +40 °C
• Input: DC 5.0V=3.0A, 9.0V=3.0A (27.0W Max)
• Wireless Output: 5.0W, 7.5W, 10.0W, 15.0W (Max)
• Apple Watch Output: 5.0W (Max)
• Total Output: Varies based on input and device configuration (e.g., 5W+5W+5W, 15W+15W+5W).
• Included Accessories: Charging Cable, Rubber mat.

Technical Support

If you have any problems with this product, please contact our technical support team for assistance.

• Customer Service: 888-988-0488
• Technical Support: 888-689-4088
• Email: service@j5create.com

Kaijet Technology International B.V.

• Address: Zomerdoorn 20, 3068 MZ Rotterdam, The Netherlands
• Email: service@j5create.com