Aldes TO GALVA - D250/125 Galvanized Steel Elbow Tee
Product Reference: 11093225
Category: Rigid Galvanized, Aluminum, and Special Ducts
Product Description
The 45° elbow tee (TE 45°) is designed to connect two branches of a galvanized ductwork system at a 45-degree angle. These elbow tees are recommended over standard 90-degree tees for supply air systems, ensuring a leak-free and efficient connection with minimal pressure loss at the branch point.
Applications
Suitable for residential and collective housing, new construction, renovation projects, and commercial spaces.
Installation
- Easy assembly through push-fit connections: ducts are female, and accessories are male.
- Sealing is achieved using sealant and/or gasket tape.
- Secure fixation to the duct is recommended using self-tapping screws (4 to 6, depending on diameter).
Key Features and Benefits
- Connects two duct branches at a 45° angle, ideal for tertiary and collective ventilation networks.
- Offers superior performance in supply air applications compared to 90° tees.
Technical Specifications
- Type: Oblique Tee
- Material: Galvanized Steel
- Diameter: 250/125 mm
- Available Diameters: 80 mm to 900 mm
- Galvanized Steel Compliance: EN 10346 standard for consistent coating quality.
- Fire Classification: MO
Dimensional Diagram
A diagram illustrates the elbow tee with dimensions labeled as Ø A (250 mm) and Ø B (125 mm).
General Information
| Reference | Main Material |
|---|---|
| 11093225 | Galvanized Steel |
