Aldes TO GALVA D160/125 Galvanized Steel 45° Tee Connector
The Aldes TO GALVA D160/125 is a galvanized steel tee connector designed for rigid galvanized, aluminum, and special ductwork systems. It facilitates the connection of two branches of a galvanized ductwork system at a 45° angle.
Product Description
The 45° tee connector allows for the connection of two galvanized ductwork branches at a 45° angle. These tee connectors are recommended over 90° tees for supply air systems, ensuring a leak-free and efficient installation with minimal pressure loss at the branch connection.
Applications
This product is suitable for:
- Residential collective housing
- New construction
- Renovations
- Commercial premises
Installation
- Easy assembly through push-fit connections: ducts are female, and connectors are male.
- Sealing is achieved using sealant and/or perforated tape.
- Fixing to the ductwork is done with self-tapping screws (4 to 6, depending on diameter).
Reference Argument
Application:
- Connection of two ductwork branches at a 45° angle in tertiary and collective systems.
- Particularly effective in supply air applications compared to a 90° tee.
Description:
- Oblique tee made of galvanized steel with diameters 160/125 mm.
Key Features:
- Available in diameters ranging from 80 mm to 900 mm.
- Made of galvanized steel conforming to EN 10346 standard, ensuring coating regularity.
- Fire classification: MO.
General Data
| References | Main Material |
|---|---|
| 11093212 | Galvanized Steel |
Dimensional Data
| References | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093212 | 160 | 125 |
Diagram showing the dimensions of the 45° Oblique Tee.
Regulatory Data
| References | Fire Classification |
|---|---|
| 11093212 | MO |
