Mora Furniture Assembly Instructions (Model HW72144)

Before You Start

⚠️ Please read all instructions carefully.

Retain instructions for future reference.

Separate and count all parts and hardware.

Read through each step carefully and follow the proper order.

We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.

Always place the product on a flat, steady and stable surface.

Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Parts List (Total for Two Units)

Components:

• A: 2 total
• B: 2 total
• C: 2 total
• D: 2 total
• E: 2 total
• F: 2 total
• G: 2 total
• H: 2 total
• J: 2 total
• K: 2 total
• L: 2 total
• M: 2 total
• N: 2 total
• P: 1 total
• Q: 1 total (455x455x5 mm)

Hardware:

• 1: M6x15 mm screws (8 total)
• 2: M6x30 mm screws (16 total)
• 3: M6x40 mm screws (20 total)
• 4: M6x55 mm screws (12 total)
• 5: M6x70 mm screws (8 total)
• 6: Ø6x14x1mm screws (52 total)
• 7: Cam lock fittings (12 total)
• 8: 4x98 mm Allen Key (2 total)

Assembly Steps

Step 1

For each unit, attach part C to part D using two screws (3) and two screws (6). Part A is also involved in this sub-assembly.

Step 2

For each unit, attach part A to the assembly from Step 1 using two screws (3) and two screws (6).

Step 3

For each unit, attach part A to part B using two screws (5) and four screws (6).

Step 4

For each unit, attach part B to the assembly from Step 3 using two screws (5) and two screws (6).

Step 5

For each unit, attach part Q to the frame assembly using four screws (4) and four cam lock fittings (7). Insert cam lock fittings (7) into designated holes before tightening screws (4).

Step 6

For each unit, attach part E to the frame assembly using four screws (4) and four cam lock fittings (7).

Step 7

For each unit, attach part F to the frame assembly using four screws (4) and four cam lock fittings (7).

Step 8

For each unit, assemble side panel components. Attach part H to part K using two screws (1), two screws (3), and four screws (6). Part J is also incorporated into this assembly.

Step 9

For each unit, attach part I to the assembly from Step 8 using two screws (1), two screws (3), and four screws (6).

Step 10

For each unit, attach part L to the assembly from Step 9 using two screws (1), two screws (3), and four screws (6).

Step 11

For each unit, assemble the drawer base. Attach two parts N to part P using four screws (2) and four screws (6).

Step 12

For each unit, attach two parts M to the drawer base assembly using six screws (2) and six screws (6).

Step 13

For each unit, attach the side panel assembly (from Step 8-10) to the main frame assembly (from Step 5-7) using six screws (2) and six screws (6).

Step 14

For each unit, attach the second side panel assembly to the main frame using six screws (2) and six screws (6).

Step 15

For each unit, attach part Q (base panel) to the bottom of the assembled unit using four screws (4) and four cam lock fittings (7). Insert cam lock fittings (7) into designated holes before tightening screws (4).

Step 16

For each unit, attach two parts M to the top of the unit using four screws (4) and four cam lock fittings (7).

Step 17 (Finish)

The assembly of both units is now complete. The final units are shown.