Product Overview
This document provides assembly instructions for the Mora 5-piece outdoor furniture set. The set typically includes two chairs and a coffee table or two ottomans. Please ensure all parts and hardware are present before beginning assembly. Assembly is recommended to be performed by two people.
Hardware Included
| Label | Description | Quantity |
|---|---|---|
| A | M6x15 mm Screw | 8 |
| B | M6x30 mm Screw | 16 |
| C | M6x40 mm Screw | 20 |
| D | M6x55 mm Screw | 12 |
| E | M6x70 mm Screw | 8 |
| F | Ø14x1 mm Washer | 52 |
| G | Mounting Block / Foot Bracket (45x45x65 mm) | 12 |
| H | 4 mm Hex Key | 2 |
[assembly tool]: A 4 mm Hex Key (H) is provided.
[two people recommended]: Assembly is easier with two people.
Furniture Components
The following numbered components are included in the set (quantities are for the complete set, typically two chairs and two tables/ottomans):
- Part 1: Chair Frame Side Panel (x2)
- Part 2: Chair Frame Back Panel (x2)
- Part 3: Chair Seat Support Frame (x2)
- Part 4: Chair Seat Base (x2)
- Part 5: Chair Seat Cushion (x2)
- Part 6: Chair Back Cushion (x2)
- Part 7: Table/Ottoman Frame Side (x2)
- Part 8: Table/Ottoman Frame Base (x2)
- Part 9: Table/Ottoman Cross Brace (x2)
- Part 10: Table/Ottoman Side Panel (x2)
- Part 11: Tabletop (x2)
- Part 12: Table/Ottoman Base Panel (x2)
- Part 13: Table/Ottoman Side Panel (x2)
- Part 14: Table/Ottoman Frame Support (x2)
- Part 15: Tabletop (x2)
Assembly Steps
Step 1: Chair Frame Assembly (Part 1)
Take two Part 1 (Chair Frame Side Panels). Attach one Part 3 (Chair Seat Support Frame) to the inside of each Part 1 using two screws C and two washers F per side. Ensure the frame is oriented correctly.
[80% complete]
Step 2: Chair Frame Assembly (Part 2)
Attach one Part 4 (Chair Seat Base) to the front of the assembled Part 1 and Part 3 structure from Step 1. Secure it using two screws C and two washers F.
[80% complete]
Step 3: Chair Seat Base Attachment
Attach the second Part 3 (Chair Seat Support Frame) to the other side of the Part 1 panels, securing it with two screws C and two washers F per side. Then, attach the second Part 4 (Chair Seat Base) to the front of this structure using two screws C and two washers F.
[80% complete]
Step 4: Chair Side Panel Attachment
Attach one Part 2 (Chair Frame Back Panel) to the rear of the chair frame assembly. Secure it using two screws E and two washers F. Repeat for the other side of the chair.
[80% complete]
Step 5: Chair Seat Support Attachment
Attach the seat cushion support (Part 11) to the chair frame. Use two screws D and two washers F on each side, screwing into the mounting blocks (Part G) which are pre-attached or integrated into the frame.
[100% complete]
Step 6: Chair Armrest Attachment
Attach the armrests (Part 10) to the chair frame. Use two screws D and two washers F on each side, screwing into the mounting blocks (Part G).
[100% complete]
Step 7: Assembled Chair
The chair frame is now assembled. Ensure all screws are tightened securely.
Step 8: Add Cushions
Place the seat cushion (Part 5) and back cushion (Part 6) onto the assembled chair frame.
Step 9: Table/Ottoman Frame Assembly
Assemble the base frame for the table/ottoman. Take two Part 7 (Table/Ottoman Frame Sides) and one Part 9 (Table/Ottoman Cross Brace). Attach the cross brace between the two side panels using screws C and washers F.
[80% complete]
Step 10: Table/Ottoman Base Attachment
Attach the Part 8 (Table/Ottoman Frame Base) to the bottom of the frame assembly from Step 9. Secure it using screws A and washers F.
[80% complete]
Step 11: Tabletop Attachment (Type 1)
Attach the tabletop (Part 11) to the assembled frame. Use screws D and washers F, screwing into the mounting blocks (Part G) on the frame.
[100% complete]
Step 12: Tabletop Attachment (Type 2)
Attach the second tabletop (Part 15) to the assembled frame. Secure it by inserting screws from the inside of the frame into the pre-drilled holes on the underside of the tabletop. The inset diagram shows a screw being inserted.
[100% complete]
Step 13: Table/Ottoman Side Panel Assembly
Attach one Part 13 (Table/Ottoman Side Panel) to the base frame assembly. Secure it using screws B and washers F.
[80% complete]
Step 14: Table/Ottoman Frame Support Attachment
Attach Part 14 (Table/Ottoman Frame Support) to the frame assembly. Secure it using screws B and washers F.
[80% complete]
Step 15: Table/Ottoman Remaining Side Panel
Attach the second Part 13 (Table/Ottoman Side Panel) to the frame assembly. Secure it using screws B and washers F.
[80% complete]
Step 16: Table/Ottoman Foot Attachment
Attach the feet/leg mounting blocks (Part G) to the bottom corners of the table/ottoman frame assembly. Use screws D to secure each mounting block.
[100% complete]
Step 17: Assembled Table/Ottoman
The table/ottoman frame with feet is now assembled. Ensure all screws are tightened securely.
Step 18: Final Table/Ottoman Assembly
Place the tabletop (Part 15) onto the assembled table/ottoman frame and secure it.
