JLab JBuddies Studio Wireless Headphones
User Manual and Setup Guide
Welcome & Brand Promise
We're literally thrilled you're using JLab! We're proud of our products and completely stand behind them.
Warranty Information
[2 Year Limited Warranty] [US-Based Customer Support]
All warranty claims are subject to JLab approval and our sole discretion. To claim warranty, please retain your proof of purchase.
Contact & Registration
CONTACT US: You can contact us via support@jlab.com or visit intl.jlab.com/contact.
REGISTER TODAY: Visit intl.jlab.com/register for product updates, tips & advice, and FAQs.
Initial Setup: Bluetooth Pairing
Step 1: Enable Bluetooth
On your device, turn on Bluetooth.
[Visual: Phone screen showing Bluetooth settings enabled.]
Step 2: Prepare Headphones
With the JBuddies Studio wireless headphones off, press and hold the [Power Button] for approximately 10 seconds. The light indicator will flash red and blue quickly, indicating it is searching for a Bluetooth device.
[Visual: Headphones with power button highlighted. Indicator light flashing red and blue.]
Step 3: Connect Headphones
Connect the headphones by selecting 'JLab JBuddies Studio BT' in your device's settings. When the headphones pair, you will hear two beeps and the light indicator will slowly flash blue.
[Visual: Phone screen showing 'JLab JBuddies Studio BT' selected. Headphones with slow blue flashing light.]
Notes on Bluetooth
- Bluetooth is a wireless radio technology sensitive to objects between the headphones and the connected device.
- The headphones can be used up to 10 meters (33 feet) from the connected device, provided there are no large obstructions (walls, etc.) between the device and the headphones.
- The headphones will remember your device after a successful connection and will automatically pair with it next time. Only one device can be connected at a time. To pair another device, first unpair the current device in Bluetooth settings.
- If the Bluetooth connection is lost for any reason, manually reconnect to Bluetooth on your device.
Charging
Connect the [Micro USB Port] using the included Micro USB cable to a computer or USB 5V 1A (or less) output device.
[Visual: Micro USB cable connecting to headphones and a power source.]
Indicators: [Charging Indicator] / [Fully Charged Indicator]
Controls
Bluetooth Functions
- Power On/Off: Press and hold the [Power Button] for 3 seconds. (Slow blue light indicates power on).
- Play/Pause/Answer/Hang Up Calls: Single press the [Play/Pause/Answer Button].
- Activate Siri (iOS) or 'OK Google' (Android): Double press the [Voice Assistant Button].
- Re-pairing and Additional Devices: With the device off, press and hold the [Power Button] for 10 seconds.
Audio Functions
- Increase/Decrease Volume: Single press the [Volume Up/Down Button].
- Track Forward/Backward: Press and hold the [Volume Up/Down Button] for 2 seconds.
Sharing Mode
Connect the included [AUX Cable] to any side of the headphones and to another pair of JBuddies Studio or any other headphones for sharing mode.
[Visual: Two pairs of headphones connected by an AUX cable.]
Go Wired
Connect the [AUX Cable] to your device for a wired connection.
[Visual: Headphones connected to a tablet or smartphone via an AUX cable.]
Safety Warnings
- Do not allow moisture or liquids to get into the earcups.
- Do not expose headphones to extreme heat, cold, or humidity.
- Be careful not to drop the headphones or expose them to pressure. Do not strain the cable by pulling it quickly or applying extreme force; do not bend the cable at sharp angles.
- Earwax may accumulate in the earcups, which can reduce sound quality. To restore sound quality, carefully remove the wax with a cotton swab or other small tool.
- If you start to feel discomfort or pain, try reducing the volume or stop using the headphones for a while.
- If you regularly experience discomfort while using this product, stop using it and consult your doctor.
- We recommend treating your headphones like quality sunglasses and storing them in a safe place when not in use.
