Momcozy V1 Pro Breast Pump

Cleaning and Sterilization

Non-washable Parts

Pump Motor
Tubing

Washable Parts

Valve
Breast Shield
Milk Collection Cup

Cleaning and Sterilizing Washable Parts

1. Clean with soapy water (40-60°C) for 3-5 minutes.

2. Use boiling water/steam/sterilizer pot for sterilization. 100°C (212°F) is required for 5-10 minutes.

⚠️ Important Note: It is not recommended to sterilize pump parts in a microwave or UV sterilizer. High temperatures (>110°C) can shorten the lifespan and cause safety risks.

Tips ?

The expected lifespan of washable parts is 1-3 months. It is recommended to replace washable parts after long-term storage or before pumping for your next child.
The breast pump will automatically shut off after 30 minutes of pumping.
If irritation or discomfort occurs, use your finger to break the seal between the breast shield and breast tissue. Stop use and consult a healthcare provider.

Product Operation and Features

Power On/Off: Long press (2 seconds).

Unlock and Keys On/Off: Short press.

Modes: Choice of 3 modes:

Stimulation Mode
Expression Mode
Mixed Mode

Auto-Lock Screen: If no operation for 30 seconds, the lock screen is enabled. Short press to unlock.

Cycle Selection: H/M/L

Suction Levels: 01-15 levels. Briefly press the -/+ button to adjust vacuum.

Timer: Briefly press the -/+ button to adjust.

Pause / Continue Pumping: ▶️ / ⏸️

For questions, please contact us by email: support@momcozy.com

Installation Guidelines

✋ Ensure your hands are clean before installation.

Gently push the valve into the milk collection cup. Check for any gaps.
First align the milk collection cup with the top of the breast shield and then press firmly for a secure connection.
Attach the milk collection cup and secure the lid for a good seal.
Connect the long end of the tubing to the breast pump motor.

Scan the QR code above to access the user manual video for further solutions.

For your convenience, refer to the video in the user manual for further solutions.