HULTARP Dish Drainer
Assembly Instructions
Product by IKEA
Product Overview
This document provides assembly instructions for the IKEA HULTARP dish drainer. The product is designed for organizing and drying dishes.
Brand: IKEA
Product Name: HULTARP Dish Drainer
Included Components:
- Main dish drainer rack structure
- Drip tray
- Hanging frame with hooks
- Fasteners (Part 10047265) - 4 pieces
- Protective caps (Part 10048928) - 2 pieces
Assembly requires careful attention to diagrams and part orientation.
Assembly Steps
Step 1: Attach Feet/Fasteners
Locate the main dish drainer rack. Attach the four (4) fasteners (Part 10047265) to the bottom corners of the rack. These act as feet. The diagram indicates a correct upward insertion method and shows incorrect methods with a cross symbol ❌.
Parts used: 4x Part 10047265
Step 2: Insert Drip Tray
Take the drip tray. Slide it into the designated channel at the bottom of the main dish drainer rack. A rightward arrow indicates the direction of movement.
Parts used: Drip tray
Step 3: Prepare Hanging Frame
Take the hanging frame. Attach the two (2) protective caps (Part 10048928) to the ends of the frame's hooks. A downward arrow indicates the cap placement.
Parts used: 2x Part 10048928
Step 4: Mount Hanging Frame
Align the prepared hanging frame with the top of the dish drainer rack. The frame is attached by hooking its ends into the side slots of the rack. The process involves three distinct actions:
- Hook the frame's ends into the upper part of the side slots.
- Gently rotate the frame downwards.
- Push the frame upwards to secure it into the lower part of the slots, ensuring it clicks into place.
Diagrams illustrate these three sub-steps for secure attachment.
Step 5: Final Assembly and Use
The HULTARP dish drainer is now fully assembled. It can be hung from a kitchen rail using the frame or placed on a countertop, with the drip tray collecting water.
The final diagram shows the completed dish drainer unit.
