J.Burrows Stilford Desk Assembly Guide
This guide provides essential assembly instructions for the J.Burrows Stilford Desktop and S2V3 Desk Frame. Ensure you have all parts and tools before beginning.
Tools and Preparation
Tools Required: A screwdriver is needed for assembly.
Assembly Environment: Assemble the item on a clean, flat surface to prevent damage.
Assistance: It is recommended that two or more people complete the assembly.
Important Notes:
- Verify all hardware is present before starting.
- If any hardware is missing, contact the store of purchase.
- Confirm the item name and required hardware quantities.
- Keep your receipt for warranty validation.
Parts List
Refer to the diagrams for identification of parts labeled 1, 2, and 3, and hardware components A through G.
Assembly Steps
Follow the diagrams to connect the desk frame components. Pay attention to the screw lengths and placement as indicated for different desktop sizes (1200mm, 1500mm, 1800mm). Ensure correct orientation of parts, especially when attaching side screens.
Secure the desktop (part 3) to the assembled frame using the provided brackets (part B) and screws (part F). Ensure all connections are firm and stable.
For further assistance or inquiries, please contact Officeworks Ltd. at 236-262 East Boundary Road, East Bentleigh, 3165, AUSTRALIA.
