J.Burrows Stilford Desk Assembly Instructions

Product: STILFORD DESKTOP and S2V1 DESK FRAME

Available Sizes: 1200x750mm, 1500x750mm, 1800x750mm

Available Finishes: WHITE, WHITE/BLACK, WHITE/OAK, OAK, WALNUT

Before You Begin

Tools Required: Screwdriver [screwdriver]

Assembly Assistance: Need Two Or More People To Complete [two-people-icon]

Assembly Environment: Assemble Item On a Clean Flat Surface [caution-icon]

Important Notes:

Please check you have all hardware before assembling.
If you think you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item and hardware part required and quantity.
Please retain your receipt for proof of purchase to validate warranty. Enjoy your new purchase.

Supplier: Officeworks Ltd., 236-262 East Boundary Road, East Bentleigh, 3165, AUSTRALIA

Assembly Steps

Step 1: Prepare Frame Components

This step involves connecting the desk frame components. You will use parts labeled '1' (desk legs) and '2' (crossbars). Hardware 'A', 'C', and 'D' are used in this stage.

Hardware Provided for Initial Assembly:

A x8
B x1
C x4
D x8

Diagram Description (Page 3): The diagram shows two desk legs (labeled '1') being connected by two horizontal crossbars (labeled '2'). Screws 'A' are shown attaching these parts. Hardware 'C' and 'D' are also indicated for connections.

Step 2: Connect Crossbars to Legs

Slide the crossbars (part '2') into the desk legs (part '1'). Ensure the crossbars reach the correct length for your desktop size.

Diagram Description (Page 4): This diagram illustrates the process of sliding the crossbars into the legs. Arrows indicate the direction of movement. Close-up views show how screws 'A' secure the crossbars to the legs. The length 'L' of the assembled frame is critical.

Fastening Instructions: Fasten the screws 'A' after part '2' reaches your desired length.

Required Frame Length (L) for Desktop Sizes:

L = 1190mm for 1200mm desktop
L = 1490mm for 1500mm desktop
L = 1790mm for 1800mm desktop

Hardware Used in this Step:

A x8
B x1

Step 3: Attach Desktop to Frame

Place the desktop (part '3') onto the assembled desk frame. Secure the desktop using the provided hardware.

Diagram Description (Page 5): The diagram shows the desktop being lowered onto the frame. Screws 'C' and 'D' are used to fasten the desktop to the frame from underneath.