J.Burrows

BUTTON FUNCTION

The clock features a digital display showing time, date, temperature, and humidity. On the top of the clock, there are three buttons labeled 1, 2, and 3.

1. Alarm button: Press briefly to turn the alarm on or off. Press and hold to adjust alarm settings.
2. Time button: Press and hold to enter time settings.
3. Volume button: Press briefly to adjust the volume. Press and hold to switch between temperature units.

FUNCTION INTRODUCTION

1. Time (tolerance +/-0.5 seconds/day) and calendar (range from January 1, 2020 to December 31, 2099) display.
2. Alarm time display on the screen.
3. When alarm is snoozed, it will repeat 2 more times at 5-minute intervals.
4. Temperature (range -10°C to 50°C, tolerance ±1°C) and humidity (range 10% to 95%) display. Test period: 20 seconds.
5. The clock has 5 buttons: alarm button, time button, volume button, SNOOZE.LIGHT button, and a rotary knob.
6. LED backlight.
7. Requires 2x AA batteries (not included).
8. To use the alarm clock: Insert the 2x AA batteries into the battery compartment at the back of the clock. Ensure the batteries are correctly placed according to their positive (+) and negative (-) terminals.

BASIC OPERATION

1. Upon turning on, the LCD display shows all symbols for 2 seconds, then switches to the default display mode with:
   • Time set to 0:00 (24-hour format)
   • Date set to January 1, 2021
2. All alarms are initially off. Default alarm times are:
   • Alarm 1: 6:00 am
   • Alarm 2: 7:00 am
   • Alarm 3: 8:00 am
3. Press and hold the volume button for 3 seconds to toggle the temperature unit.

TIME SETTING

1. Press and hold the time button for 3 seconds. The year digits will start flashing. Use the rotary knob to adjust the year. Rotate it forward to increase the value and backward to decrease it. Press the knob to confirm the desired value. Follow the same process for setting the month, day, hour, and minute (rotate the knob to adjust and press the knob to confirm each step).
2. Press the time button briefly to toggle between 12-hour and 24-hour display formats.

ALARM SETTING

1. Switch between alarms: Press the alarm button to toggle between alarm 2 and alarm 3. The alarm time displayed will change accordingly. When viewing the alarm time, press the rotary knob to turn the alarm on or off.
2. Set alarm times: In the normal alarm time display mode, press and hold the alarm button for 3 seconds to enter the alarm setting mode. First, set the hour. Rotate the knob to adjust, then press the knob to confirm. Next, set the minute in the same way: rotate to adjust, then press to confirm. After confirming the minute, exit the setting mode. To set alarm 2 or alarm 3, press the alarm button to switch, then repeat the above process to adjust the alarm time.

SNOOZE FUNCTION

When the alarm is ringing, press the SNOOZE.LIGHT button to activate snooze mode. The alarm will snooze for 5 minutes, with a maximum of 3 snooze cycles. To stop the alarm and snooze for the day, press the SNOOZE.LIGHT button for more than 2 seconds. This will also turn off the alarm sound every second. If the alarm rings without any action, it will automatically snooze for 1 minute. The alarm will continue to ring the following day at the set time.

ALARM FORMAT

1. The alarm will sound for 1 minute in a progressive pattern: A single 'DI' beep every second for 15 seconds. Two quick 'DIDI' beeps every second for the next 15 seconds. Three quick 'DIDIDI' beeps every second for another 15 seconds. Four quick 'DIDIDIDI' beeps every second for the last 15 seconds.
2. The alarm will only activate if it is turned on. When the alarm is on, a small digit will appear to the left of the alarm symbol on the display to indicate which alarm is active.

Alarm on: ?

Alarm off: ?

VOLUME OF ALARM

1. Press the volume button to adjust the alarm volume. An alarm symbol will appear at the top right of the display. Rotate the knob forward to increase the volume or backward to decrease it.

LED BACKLIGHT

1. In normal display mode, press the SNOOZE.LIGHT button to turn on the backlight for 5 seconds.
2. The backlight does not work when adjusting the alarm volume.
3. When the backlight is on, the light bulb icon (?) appears on screen. Press and hold the SNOOZE.LIGHT button for 3 seconds to adjust the backlight's brightness.
4. Note: If the display appears dim, replace the batteries.

PRODUCT WARRANTY— VALID FOR AUSTRALIAN CUSTOMERS ONLY

Officeworks Ltd warrants that this product will be free from defects and work as intended for 1 year from the date of purchase by the original customer. If the product has any defects or does not work as specified during the Warranty Period, Officeworks will, at its discretion and at its expense, repair or replace the product.

This warranty does not apply:

• to cosmetic damage;
• to damage caused by consumables used in connection with the product (such as batteries);
• where the product has not been used in accordance with all provided instructions;
• to damage arising from fair wear and tear;
• where the product has not been subject to reasonable use;
• where the product has not been intentionally or negligently damaged and/or;
• if the customer has attempted to repair the product.

To make a claim under this warranty, return your product with your receipt or proof of purchase to your nearest Officeworks store or contact 1300 633 423.

This warranty is provided in addition to any rights you may be entitled to under the Competition and Consumer Act 2010. Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.