Televes EasyF 6D 5...2400MHz 11/14dB Splitter

Product Overview

The Televes EasyF 6D is a 6-way splitter with EasyF connectivity, designed for SMATV signals. It features a compact design and efficient electrical performance. While intended for indoor installation, it can also be adapted for outdoor use with a suitable housing (ref. 4163). The product is supplied in packaging of 10 units.

Reference: 5469

Logical Reference: EFV6

EAN13: 8424450118986

Physical Data

Packaging

Key Features and Benefits

• EasyF Connectivity System: Facilitates installation and saves time.
• Durable Construction: Made from Zamak for high shielding.
• High Reliability: Automated manufacturing with the latest generation of microcomponents ensures consistent quality.
• Improved Throughput Loss: Optimized for signal integrity.
• Good Electrical Behavior: Reduces impulse noise for cleaner signals.
• Grounding Screw: Included for proper grounding.
• DC Passthrough: Allows DC power to pass from outputs to the input.

The EasyF Connection: Simplicity and Economy

The EasyF connector is an innovative system for connecting the internal conductor (core) of the coaxial cable directly into the device. This enhances connection reliability. By eliminating traditional 'F' connectors, the chassis size can be reduced, and the connection of two cables can be secured with a single screw.

• Time Savings: Reduces installation time by eliminating the need to terminate coaxial cables and screw on connectors, which can be challenging in tight spaces.
• Connection Reliability: A clamp secures the cables, preventing the coaxial cable from detaching.
• Cost Savings: No additional 'F' or 'CEI' connectors are required.
• Space Optimization: Inputs and outputs are located on the same side of the product, simplifying cable management within cabinets and enclosures.
• Simple Three-Step Installation:
  1. Unscrew the splitter cover to access the connection point.
  2. Insert the pre-stripped coaxial cables.
  3. Close the cover and screw to secure the connection.

With EasyF, coaxial cable connection is achieved through an automated system that inserts the core (internal conductor) via contact, eliminating the need for soldering.

This system also contributes to:

• Increased Device Lifespan: Eliminates solder deterioration over time.
• Reduced Defect Rate: Minimizes defects often caused by cold soldering.
• Optimized Electromagnetic Performance: Ensures excellent performance at high frequencies.
• Environmental Commitment: Eliminates contamination from the soldering process and reduces electricity consumption during production.

Technical Specifications: Ref. 5469