Televes
Derivatore EasyF 6D 5...2400MHz 16dB
The Televes EasyF 6D is a 6-way splitter designed for SMATV signals, featuring the innovative EasyF connection system. It offers a compact design and efficient electronic performance, with a derivation loss of 16dB, making it suitable for first-floor installations. This device is intended for indoor use and is supplied in boxes of 6 units.
Article Number: 5492
Logical Article: EFA616
EAN13: 8424450119020
Packaging
- Box: 6 pcs.
- Tray: 120 pcs.
Physical Data
| Specification | Value |
|---|---|
| Net Weight | 240.00 g |
| Gross Weight | 240.00 g |
| Width | 121.00 mm |
| Height | 59.00 mm |
| Depth | 15.00 mm |
| Product Weight (main) | 241.00 g |
Key Features
- EasyF Connection System: Facilitates installation and saves mounting time.
- Zamak Construction: Provides excellent shielding.
- High Reliability: Manufactured with advanced microcomponents.
- Improved Through-Loss: Reduced signal loss.
- Good Electrical Performance: Minimizes impulse noise.
- Grounding Screw Included: For safety.
- Bi-directional DC Passthrough: Between input and output.
EasyF Connection System: Simplicity and Savings
EasyF is an innovative concept for connecting the internal conductor of the coaxial cable (core) directly into the device, enhancing connection reliability. The absence of "F" connectors allows for a reduced chassis size and enables the connection of two cables with a single screw.
- Real Time Savings: Speeds up installation by eliminating the need to connect coaxial cables and screw connectors into the device, which can be difficult in tight spaces.
- Connection Reliability: A retaining flap prevents coaxial cables from loosening.
- Cost Savings: No additional "F" or "IEC" connectors are required.
- Space Optimization: Inputs and outputs are located on the same side, preventing cable bending and simplifying work within distribution cabinets and boxes.
- Simple Three-Step Assembly: Simply connect and unscrew covers to connect two cables:
- 1. Unscrew the splitter cover to access the connection.
- 2. Insert the pre-stripped coaxial cables.
- 3. Close the cover and screw to secure the connection.
Discover More About EasyF System Reliability
With EasyF, coaxial cable connection is achieved through an automatic system that inserts the cable's internal conductor for contact, eliminating the need for soldering.
- Like New: Device lifespan is extended by eliminating potential solder deterioration over time.
- Reduced Failure Rate: Generally caused by cold solder joints.
- Optimized Electromagnetic Performance: At high frequencies.
- Environmental Commitment: Contamination from soldering is eliminated, and electricity consumption during production is reduced.
Application Example
A diagram illustrates a typical distribution network setup using Televes splitters, showing signal distribution from a MATV + FI input to multiple outputs with varying dB losses (e.g., 4D/25dB, 4D/20dB, 2D). The diagram indicates different levels of signal distribution across floors or zones.
Technical Characteristics: Ref. 5492
| Specification | Unit | Value (TERR) | Value (SAT) |
|---|---|---|---|
| Frequency Range | MHz | 5... 2400 | 5... 2400 |
| Number of Outputs | 6 | 6 | |
| Plates | 1 | 1 | |
| Inputs/Bands | TERR | SAT | |
| Through-Loss | dB | 5 | 5 |
| Derivation Loss | dB | 16 | 16 |
| Isolation Between Derivations | dB | > 30 | > 30 |
| Connectors | Type "EasyF" | Type "EasyF" | |
| Maximum Voltage | V | 40 | 40 |
| Maximum Current | mA | 300 | 300 |
| DC Passthrough | Usc. Ing. | Usc. Ing. |
