VIOFO A229 Pro Dashcam

Device Overview and Indicators

The VIOFO A229 Pro is an advanced dashcam system. Key indicators and status lights include:

• REC LED: Indicates recording status (e.g., solid red for recording, flashing red for error).
• GPS LED: Shows GPS signal status (e.g., solid blue for acquired signal, flashing blue for searching).
• MIC LED: Indicates microphone status.
• Wi-Fi LED: Shows Wi-Fi connectivity status (e.g., solid green for connected, flashing green for connecting).
• PWR LED: Indicates power status.

The dashcam display shows real-time information such as time, date, recording resolution (e.g., 4K 2160P30), speed unit (MPH or KMH), Wi-Fi status, G-sensor status, GPS status, and HDR status.

Key Features and Specifications

The A229 Pro supports high-end features and specifications:

• High Endurance Storage: Supports microSD cards up to 512GB, recommended UHS-I U1/U3.
• File System: Requires FAT32 format for cards larger than 32GB.
• Power Input: USB Type-C, supporting 12V/24V vehicle power.
• Optional Accessories: Supports CPL filter (Circular Polarizing Filter) for glare reduction.
• GUIFormat Tool: Available for download at https://viofo.com/download/guiformat.exe.

Device Layout

Front View: Features the primary camera lens, designed to accommodate an optional CPL filter.

Side Ports: Includes a USB Type-C port for power, a dedicated port for the GPS module, and a port for an optional microphone.

SD Card Slot: For inserting the microSD card.

Installation and Setup

1. Mounting: Securely attach the dashcam to the vehicle's windshield using the provided mount.
2. GPS Module Connection: Connect the GPS module to its designated port.
3. Power Connection: Connect the USB Type-C cable to the dashcam and the vehicle's power source.
4. MicroSD Card: Insert a compatible microSD card. Format the card using the dashcam's menu or the GUIFormat tool.

Settings Menu

Access and configure various settings through the dashcam interface or the VIOFO mobile app.

Language Selection

Choose from available languages including English, Français, Español, and Português.

Time Zone and Time Display

Set the correct time zone (e.g., GMT-2, GMT-1, GMT+0, GMT+1, GMT+2, GMT+3) for accurate video timestamps. Time can be synchronized via GPS.

Speed Unit

Select the preferred speed display unit: MPH (Miles Per Hour) or KMH (Kilometers Per Hour).

Video Recording Settings

• Loop Recording: Configure segment lengths (e.g., 1, 2, 3, 5, 10 minutes, or longer intervals like 15, 30, 60 minutes).
• Resolution and Frame Rate:
  • Single Channel: 3840x2160P 30fps, 2560x1440P 30fps, 1920x1080P 30fps.
  • Dual Channel (Front + Rear): Options include 2160P30+1440P30, 1440P30+1440P30, 1080P30+1080P30.
  • Triple Channel (Front + Rear + Interior): Various combinations of 2160P30, 1440P30, and 1080P30 are supported.
• HDR: Enable or disable High Dynamic Range for improved video quality in challenging lighting conditions.
• G-Sensor: Adjust sensitivity (e.g., Off, Low, Medium, High) to detect impacts and protect recordings.
• Parking Mode: Configure recording behavior when the vehicle is parked, with options for motion detection or time-lapse recording at various frame rates (e.g., 1, 2, 3, 5, 10 fps).

VIOFO Mobile App

Manage your dashcam wirelessly using the VIOFO mobile app.

Connecting to Wi-Fi

Enable Wi-Fi on the dashcam. Download the "VIOFO" app from your smartphone's app store. Connect your smartphone to the dashcam's Wi-Fi network (SSID example: VIOFO_A229P_5E68, Password example: 12345678).

App Features

• Live View: Stream video from the dashcam in real-time.
• Playback: Review recorded footage directly on your mobile device.
• Download: Save video files from the dashcam to your smartphone.
• Settings Adjustment: Configure dashcam settings remotely.
• Firmware Updates: Update the dashcam's software via the app.

File Management

Video files are typically stored in folders like DCIM\Movie and DCIM\Photo on the microSD card. Parking mode recordings may be in a DCIM\Movie\Parking folder.

Sample filenames may appear as 2023_0821_180010_062PF.MP4, indicating date, time, and file type (e.g., PF for Primary Front, PI for Primary Interior, PR for Primary Rear).

For playback on a computer, you can use media players like VLC or the VIOFO Dashcam Viewer software.

Technical Details

• Wi-Fi Bands: Supports both 2.4GHz and 5GHz Wi-Fi.
• GPS: Records location and speed data, viewable in compatible software or the VIOFO app.
• Operating Temperature: Recommended range is typically up to 60°C (140°F) for the device, with specific accessory ratings like VIOFO HK4 mentioned.
• Power Consumption: Varies based on operation, typically around 5V/2A.
• Frame Rate Options: Includes standard rates like 30fps and specific rates for parking modes (e.g., 1, 2, 3, 5, 10 fps).
• Frequency: May support 50Hz or 60Hz frequency settings for power line flicker reduction.

Support and Resources

For further assistance, troubleshooting, or to download the latest firmware and software, please visit the official VIOFO websites:

• Main Website: https://www.viofo.cn/
• Support & Downloads: https://www.viofo.com/

Contact Information:

• Email: support@viofo.com, share@viofo.com
• Phone: +86-755-8526 8909
• Customer Service QQ: 893968675, 759600594