VIOFO A229 Pro Dashcam

Product Overview

The VIOFO A229 Pro is an advanced dashcam system designed for comprehensive vehicle recording. It offers high-resolution video capture, multiple camera options, and intelligent recording features.

Standard Items Included

• Front Camera
• GPS Mount
• Type-C Data Cable
• Car Charger
• Spare Sticky Pads
• Trim Removal Tool
• Static Stickers (x2)
• Cable Clips
• User Manual

Note: The USB data cable is intended for connecting the camera to a computer for file transfer or firmware upgrades, not for charging the camera.

Optional Accessories

• Rear Camera
• Interior Camera
• Rear Camera Cable (6M)
• Interior Camera Cable (1M)
• Bluetooth Remote Control
• HK4 Hardwire Kit
• CPL Filter
• MicroSD Card

Product Diagrams

Front Camera (Main Unit)

Diagram of the front camera unit:

• 1. Menu / Power On|Off Button: Controls power and navigates menus.
• 2. Menu Up / Recording Start | Stop Button: Moves up in menus or starts/stops recording.
• 3. Menu Confirm / Video Protect / Playback Button: Confirms selections, locks current video, or enters playback mode.
• 4. Menu Down / Microphone On | Off Button: Moves down in menus or toggles audio recording.
• 5. Wi-Fi On | Off Button: Toggles the Wi-Fi connection.
• 6. Memory Card Slot: For inserting the microSD card.
• 7. Interior Camera Port: Connection for an optional interior camera.

Main Unit Rear View

Diagram of the rear view of the main unit:

• 1. Rear Camera Port / Power In / microSD Card Reader Mode: Connects rear camera, receives power, or enables PC connection mode.
• 2. Reset Button: Used to reset the device.
• 3. Power Status Indicator LED: Shows power status.
• 4. Recording Status Indicator LED: Shows recording status.
• 5. GPS Status Indicator LED: Shows GPS signal status.
• 6. Microphone Status Indicator LED: Shows audio recording status.
• 7. Wi-Fi Status Indicator LED: Shows Wi-Fi connection status.

Main Unit Side View

Diagram of the side view of the main unit:

• 1. USB Power Port: For connecting the power cable.
• 2. Mount (GPS Module): Attachment point for the GPS module.
• 3. Lens: Captures video footage.

Rear Camera (Optional)

Diagram of the optional rear camera:

• 1. Bracket: For mounting the camera.
• 2. Power In Port: Receives power.
• 3. Lens: Captures rear view footage.

Interior Camera (Optional)

Diagram of the optional interior camera:

• 1. Bracket: For mounting the camera.
• 2. Power In Port: Receives power.
• 3. Lens: Captures interior view footage.
• 4. Infrared LED: Provides illumination in low light.
• 5. IR Light Sensor: Detects ambient light conditions.

LED Indicators

The dashcam features several LED indicators to show its status:

• PWR LED: Solid Red (Power On), Flashing Red (Updating Firmware), Off (Power Off).
• REC LED: Solid Red (Recording), Flashing Red (Not Recording).
• GPS LED: Flashing Blue (GPS Signal Receiving), Solid Blue (GPS Signal Received), Off (GPS Disabled).
• MIC LED: Solid Blue (Audio Recording On), Off (Audio Recording Off).
• Wi-Fi LED: Flashing Blue (Wi-Fi On and Waiting Connecting), Solid Blue (Wi-Fi Connected), Off (Wi-Fi Disabled).

Buttons and Icons

The dashcam's buttons have different functions depending on the mode:

Recording Mode Buttons

• Click once to stop recording.
• Click once to lock the file being recorded [Video Protect].
• Click once to enable/disable audio recording.
• Long press to enable/disable parking mode.
• Long press to enable/disable Wi-Fi.
• Click once to change live video source.

Standby Mode (Not Recording) Buttons

• Click once to enter the menu.
• Click once to start recording.
• Long press to format the memory card.
• Long press to enter the playlist.
• Click once to enable/disable audio recording.
• Long press to enable/disable parking mode.
• Long press to enable/disable Wi-Fi.
• Click once to change live video source.

Playlist Mode Buttons

• Return to previous menu / Exit playlist.
• Menu up [⬆️] / Change playback speed / Delete the video.
• Select the current video / Play [▶️] / Pause.
• Menu down [⬇️] / Change playback speed / Lock current / Unlock current video.

Setting Menu Mode Buttons

• Exit setting menu / Return to previous menu.
• Menu up [⬆️].
• Enter / Confirm setting options.
• Menu down [⬇️].

Display Overview

The dashcam's LCD screen displays various indicators and information:

• HDR Status Indicator
• Recording Mode Indicator
• Wi-Fi Status Indicator
• Recording Status Indicator
• Emergency Lock Indicator
• Loop Recording Status
• Recording Time Display
• G-sensor Status Indicator
• Video Resolution (e.g., 2160P30)
• Parking Mode Indicator
• GPS Status Indicator
• Parking Motion Detection Indicator
• Voice Control Indicator
• MicroSD Card Status Indicator
• Microphone Status Indicator
• GPS Speed Display (e.g., MPH)
• Date and Time Display

Installation

Insert / Remove the Memory Card

To Insert: Ensure the camera is off. Hold the memory card as shown and slide it into the card slot until it clicks.

To Remove: Ensure the camera is off. Push the edge of the memory card with your fingernail; it will spring out for removal.

Note: The microSD card is sold separately and must be Class-10 or UHS-I rated, up to 512GB. VIOFO recommends its industrial-grade microSD cards. The card must be formatted before first use (exFAT or FAT32). Turn off the camera before inserting or removing the card to prevent data corruption.

Format the Memory Card

Memory cards must be formatted before first use. This can be done via the VIOFO App (Settings > Format) or by long-pressing the [Format Button] on the camera. Alternatively, format the card on a computer using the exFAT or FAT32 file system. A GUIFormat tool is available on the VIOFO website for deep formatting.

Note: Formatting the card erases all data; back up important files first. Periodic formatting is recommended for optimal performance.

Install the Front Camera

1. Select a location on the windshield behind the rear-view mirror that does not obstruct the driver's view.
2. Wipe the installation surface clean and ensure it is grease-free for proper adhesion.
3. Mount the dashcam directly to the windshield with the sticky pad, or attach the static sticker first, then the mount.
4. Peel off the protection film from the sticky pad and camera lens.
5. Fix the camera securely in the chosen location.
6. Adjust the Lens Angle by observing the live view on the LCD screen, tilting up or down as needed.
7. Connect to Power: Insert the car charger's USB Type-C cable into the camera mount's port and plug the adapter into the vehicle's 12V/24V power socket.

Install the Static Sticker (Optional)

1. Clean the windshield surface.
2. Peel the red protective film off the static sticker and attach it to the windshield, pressing to remove air bubbles.
3. Peel the green protective film off the static sticker.
4. Peel the protection film from the mount's sticky pad and attach it to the static sticker, pressing firmly.

Install the Rear Camera (Optional)

1. Select an installation location on the rear windscreen, avoiding defrost grid wires, where the camera can record the entire rear view.
2. Wipe the installation surface clean.
3. Peel the protection film off the sticky pad and camera lens.
4. Fix the rear camera in the selected location.
5. Connect with Rear Camera: Power off the product. Connect the rear camera cable to the front camera (main unit). Route the cable as shown in the diagrams.

Install the Interior Camera (Optional)

1. Select an installation location on the windscreen, avoiding defrost grid wires, for a clear interior view.
2. Wipe the installation surface clean.
3. Peel the protection film off the sticky pad and camera lens.
4. Fix the interior camera in the selected location.
5. Connect with Interior Camera: Power off the product. Connect the interior camera cable to the front camera (main unit). Route the cables using the provided clips for a tidy installation.

Installation Tips

• Do not install the camera in a location that obstructs the driver's visibility or safety.
• Mount the camera close to the rearview mirror for an equal field of view on both sides.
• Position the camera lens within the windshield wiper's sweeping range for a clear view on rainy days.
• Do not install or mount the camera or cables near or within the range of airbag panels. The manufacturer is not liable for injuries caused by airbag deployment.
• Ensure the installation location is not affected by sun control film (window tint) and that no other electronic equipment is placed too close to the camera for optimal performance.

Remove Cameras

To remove the front camera from its bracket, slide the camera to the right and pull it out. Note: Always turn off the camera before plugging or unplugging rear or interior cameras.

Dash Cam Recording Operation

Initial Setup

Upon first activation, the dashcam prompts for initial setup: Language, Time Zone, and Speed Unit. Use the menu buttons [⬆️]/[⬇️] to select options and the OK button [✔️] to confirm.

• Language Setting: Select from available languages (e.g., English, Français, Español, Português).
• Time Zone Setting: Select your current time zone.
• Auto Time and Date Setup: Confirm to automatically set time and date using satellite signal.
• Speed Unit Setting: Choose between MPH and KMH.

Note: These settings can be modified later in the settings menu. Factory resets will trigger the initial setup again.

Format microSD Card

Memory cards must be formatted before first use. Select the format option [Format Button] and confirm. The camera will restart after successful formatting.

Note: Formatting erases all data. Settings can be modified anytime in the settings menu.

Power On / Off

• The camera automatically turns on and starts recording when the engine starts.
• It stops recording and turns off when the engine is turned off or the charging cable is unplugged.
• Short press the [Power Button] to power on.
• Long press the [Power Button] to power off.

Loop Recording

Automatic loop recording begins when the camera detects power with a microSD card inserted. Video files are saved in 1, 2, 3, 5, or 10-minute segments. When the card is full, the oldest files are automatically overwritten. Loop recording files are saved in the DCIM\Movie directory.

Emergency Recording

• Automatic: If the G-sensor detects a collision, the current footage is automatically locked to prevent overwriting.
• Manual: Press the [Lock Button] during recording to manually lock the current file. Locked files are saved in the DCIM\Movie\RO directory.

Note: G-sensor sensitivity can be adjusted in the settings.

Disable / Enable Audio Recording

Press the [Microphone Button] to turn audio recording on or off. The [MIC LED] will be solid blue when audio is on and off when audio is off.

Parking Mode

The dashcam offers three parking mode options for surveillance when the engine is off, typically requiring a hardwire kit for continuous power:

• Auto Event Detection: Records video when motion is detected and stops when no new movement occurs.
• Time Lapse Recording: Records at low frame rates (1-10 fps), conserving memory and allowing continuous recording without audio.
• Low Bitrate Recording: Records video and audio at a low bitrate, using small file sizes for continuous recording.

Note: VIOFO recommends the HK4 ACC hardwire kit for parking mode. In hot weather (above 60°C), consider turning off the dashcam to prevent errors.

Playback and Manage Videos

Playback Video on Dashcam

1. From standby mode, long press the [Playback Button] to enter the playlist.
2. Use the arrow buttons [⬆️]/[⬇️] to select a video and press the [Play Button] [▶️] to play it.
3. Press the [Return Button] to exit.

Playback Video on VIOFO APP

Enable Wi-Fi on the dashcam (long press [Wi-Fi Button]). Connect your smartphone to the dashcam's Wi-Fi network. Open the VIOFO app and select 'Connect your camera' to control the dashcam, play, and manage files.

Playback Video on PC

1. Turn off the dashcam and remove the microSD card.
2. Insert the card into a card reader connected to your PC.
3. Navigate to the DCIM folder and use a video player (like VLC) to playback the files.

Note: If your PC has a microSD slot, you can insert the card directly.

Video File Storage Location

• Loop Recording (Including Motion Detection): DCIM\Movie
• Emergency Recording (Locked Video): DCIM\Movie\RO
• Parking Recording (Auto Event Detection / Time-lapse / Low Bitrate): DCIM\Movie\Parking
• Snapshot: DCIM\Photo

File Format Definition

Files recorded by different cameras are saved separately. The filename format is YYYY_MMDD_HHMMSS_SeqNum.MP4.

• F indicates Front Camera.
• I indicates Interior Camera.
• R indicates Rear Camera.
• P indicates video recorded in Parking Mode.

Example: 2023_0821_180010_062PF.MP4 (Front camera, normal recording).

Review and Control on Smartphone

Connect to Smartphone

The VIOFO app allows remote control, live preview, playback, and video management via smartphone.

• Android Users: Download from Google Play or APK from the VIOFO website (viofo.com).
• iOS Users: Download from the App Store.

Connect VIOFO APP

1. Turn on Wi-Fi in the camera menu or long press the [Wi-Fi Button]. The Wi-Fi name (SSID) and password will appear on the camera screen.
2. On your phone, connect to the dashcam's Wi-Fi network (e.g., VIOFO_A229P_5E8A with password 12345678). The camera's Wi-Fi LED will turn solid blue upon connection.
3. Open the VIOFO app and select 'Connect your camera'.
4. You can now view live feeds from cameras, change settings, and manage files through the app.

APP Layout Overview

The app interface provides access to various functions:

• 1. Menu Button
• 2. Home Page
• 3. Downloaded Video
• 4. VIOFO Official Facebook Page Link
• 5. Official Support Link
• 6. Firmware Update Link
• 7. VPN Connection Status

Preview Video Controls

• 1. Rear Camera Live Video Feed
• 2. Interior Camera Live Video Feed
• 3. Front Camera Live Video Feed
• 4. Audio Recording Status Indicator
• 5. Motion Detection Status Indicator
• 6. Switch Camera Video Source Button
• 7. Take a Video Snapshot Button
• 8. Go to Video File Lists Button
• 9. Start / Stop Recording Button
• 10. Go to Dashcam Settings Button
• 11. Video File Lists Display
• 12. Download Video Files Button
• 13. Delete Video Files Button

Install Accessories

Install CPL

The CPL (Circular Polarizing Lens) reduces reflections and glare from glass and road surfaces, improving image quality. Align the white mark on the CPL with the corresponding mark on the camera during installation.

Install Bluetooth Remote Control (Optional)

Mount the Bluetooth Remote Control in a convenient location. Pressing the remote's video lock button protects important videos by locking the current file and taking a snapshot, without requiring you to take your eyes off the road.

Pairing: Power on the camera. Press and hold the video lock button on the remote for 3 seconds to pair. A successful pairing is indicated by the remote's LED turning blue.

Dashcam Settings

Settings can be adjusted via the camera's menu or the VIOFO App. Stop recording before entering the settings menu.

Video Settings

• Resolution: Options include Front Camera only (e.g., 3840x2160P 30fps), Front + Rear (e.g., 2160P30+1440P30), Front + Interior (e.g., 2160P30+1080P30), and Front + Rear + Interior (e.g., 2160P30+1440P30+1080P30).
• Video Bitrate: Low / Normal / High / Maximum. Higher bitrates improve quality but use more storage.
• Loop Recording: Set file segment length (1 / 2 / 3 / 5 / 10 Minutes).
• Record Audio: Toggle the microphone on/off using the [Microphone Button].
• Exposure Value (EV): Adjust from -2.0 to +2.0 for front, rear, and interior cameras to optimize brightness. Default is 0.0.
• HDR (High Dynamic Range): Off / On / Auto HDR Timer. Helps balance lighting in bright and dark areas.
• G-Sensor: Adjust sensitivity (low to high) to determine the force required to lock a file. Low sensitivity is recommended.
• Stamp: Imprint information on video: Date, GPS Speed, GPS Coordinates, Custom Text, License Plate, Logo, Brand Model.
• Time-lapse Recording: Off / 1 / 2 / 3 / 5 / 10 fps. Records at intervals to save space.
• IR LED: Off / On / Auto. Controls infrared LEDs for interior camera illumination. 'On' results in black and white video; 'Auto' adjusts based on light.
• Parking Recording:
  • Parking Mode: Auto Event Detection, Time Lapse Recording, Low Bitrate Recording.
  • Parking Recording Timer: Set duration before shutdown (Off / 1 Hour).
  • Enter Parking Mode Timer: Delay before entering parking mode (Off / 90 Seconds).
  • Parking G-sensor: High Sensitivity suggested for parking mode event recording.
  • Parking Motion Detection: Adjust sensitivity to avoid false triggers from wind/rain.
• Image Rotate & Mirror: Enable/disable for rear and interior cameras.
• Custom Text Stamp: Imprint custom text on video.
• License Plate Number: Imprint the vehicle's license plate number.
• Live Video Source: Select which camera feed to display (Front, Rear, Interior, or combinations).

System Settings

• Wi-Fi: On / Off / 2.4GHz / 5GHz. 5GHz is recommended. Long press the [Wi-Fi Button] to enable quickly.
• Time Zone: Set current time zone for GPS time synchronization. Manual adjustment for daylight saving is required.
• Date/Time: Manually set the system date and time.
• Boot delay: Set a delay before the camera powers on (Off / 5 Seconds / 10 Seconds).
• LED: Control LED indicators (All Off / All On / Power LED Only).
• Parking Mode LED: Control LEDs specifically during parking mode.
• Beep Sound: Enable/disable button sounds and startup sounds (Off / Only Keytone / Only Boot Sound / All).
• Voice Notification: Turn on/off voice alerts and adjust volume (Low / Medium / High).
• Voice Control: Enable voice commands for camera operation (Take Photo, Turn On Audio, Start Recording, etc.). Voice command language should match system language (English, Chinese, Russian, Japanese). For other system languages, only English voice commands work.
• GPS: Turn on/off the GPS logger. Disabling it stops speed and position logging and time synchronization. Use 'Dashcam Viewer' software to view GPS data.
• Speed Units: Select between KMH and MPH.
• Screen Saver: Set screen to turn off after a period (e.g., 1 minute) while recording.
• Frequency: Adjust to minimize video flickering and banding.
• Language: Change the display language.
• Format: Erase all data on the microSD card. A reminder can be set for periodic formatting (Off / 15 / 30 / 60 Days).
• Default Setting: Restore the device to factory settings.
• Version: Check the current firmware version.

File Lists

• Video: Access recorded video files.
• Photo: Access recorded photo files.

Firmware Upgrade

Firmware can be upgraded by following instructions on the VIOFO website: viofo.com/content/42-help-and-support/.

Note: Format the microSD card in the camera before upgrading for stability. Do not power off or unplug the camera during the upgrade process.

Notice

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation subjects to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Shenzhen VIOFO Technology Co., Ltd, declares that this Radio Frequency peripheral is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Customer Service

Thank you for choosing VIOFO! Products are warranted for 12 months and accessories for 3 months from the purchase date. VIOFO offers lifetime technical support.

Product Registration Program

Register your product at www.viofo.com to extend your warranty by 6 months (total 18 months).

Video Sharing

Share your VIOFO camera videos with VIOFO at share@viofo.com for a chance to receive a gift.

How to Contact Us

• Submit a ticket at support.viofo.com
• Live chat at www.viofo.com
• Email: support@viofo.com
• Facebook: www.facebook.com/viofo.world
• Phone: +86 755 8526 8909 (CN) (Mon-Fri 9am-6pm)