90-105 WATT MEDICAL POWER SUPPLIES
PMP105 SERIES
DESCRIPTION
The PMP105 series of AC/DC switching power supplies provide 90-105 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case and feature an IEC320/C14, C6, C18, or C8 inlet for interchangeable cords, supporting world-wide use. All models meet EN55011 class B emission limits and are designed for medical applications. The product displays CE and RoHS compliance marks.
FEATURES
- Low safety ground leakage current
- Wide input range 90 to 264 VAC
- Optional output connectors
- 100% burn-in at full load
- Overvoltage protection
- Over temperature protection
- Overcurrent protection
- Compliant with CEC and Energy Star Efficiency level V requirements
- No load power consumption less than 0.5 W
- Average active efficiency greater than 87%
- Compliant with RoHS requirements
SAFETY STANDARD APPROVALS
- UL ES 60601-1, CSA C22.2 No. 60601-1 (File No. E178020)
- TÜV EN 60601-1
INPUT SPECIFICATIONS
| Input voltage: | 90-264 VAC |
| Input frequency: | 47-63 Hz |
| Input current: | 1.4 A (rms) for 115 VAC 0.7 A (rms) for 230 VAC |
| Earth leakage current: | 200 μA max. @ 264 VAC, 63 Hz |
| Touch current: | 100 μA max. @ 264 VAC, 63 Hz |
OUTPUT SPECIFICATIONS
- Output voltage/current: See rating chart.
- Maximum output power: See rating chart.
- Ripple and noise: 1% peak to peak maximum at the full load.
- Over voltage protection: Provided and set at 115-140% of its nominal output voltage, latching by recycle input to reset.
- Short circuit protection: Automatic recovery.
- Over temperature protection: Latching by recycle input to reset.
- Temperature coefficient: ±0.04%/°C maximum.
- Transient response: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 µs after a 25% step load change.
ENVIRONMENTAL SPECIFICATIONS
- Operating temperature: 0°C to +60°C
- Storage temperature: -40°C to +85°C
- Relative humidity: 5% to 95% non-condensing
- Temperature derating: Derate from 100% at +40°C linearly to 50% at +60°C.
GENERAL SPECIFICATIONS
- Switching frequency: 70-140 KHz
- Power factor: 0.98 Typical at 115 VAC
- Efficiency: 87% min. at full load
- Hold-up time: 10 ms minimum at 110 VAC
- Line regulation: ±0.5% maximum at full load
- Inrush current: 80 A @ 115 VAC or 120 A @ 230 VAC, at 25°C cold start
- Withstand voltage: 5600 VDC from input to output (2 MOPP), 2100 VDC from input to ground (1 MOPP), 700 VDC from output to ground. For Class II models, 4000 VAC from input to output.
- MTBF: 150,000 hours at full load at 25°C ambient, calculated per MIL-HDBK-217F.
EMC PERFORMANCE
- EN55011: Class B conducted, class B radiated
- EN61000-3-2: Harmonic distortion, class A and D
- EN61000-3-3: Line flicker
- EN60601-1-2
- EN61000-4-2: ESD, ±15 KV air and ±8 KV contact
- EN61000-4-3: Radiated immunity, 9-28 V/m
- EN61000-4-4: Fast transient/burst, ±2 KV
- EN61000-4-5: Surge, ±1 KV diff., ±2 KV com
- EN61000-4-6: Conducted immunity, 10 Vrms
- EN61000-4-8: Magnetic field immunity, 30 A/m
- EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms
UNIVERSAL INPUT PMP105 MEDICAL SERIES
OUTPUT VOLTAGE/CURRENT RATING CHART
| Model | Class I(1) | Class II(2) | V1 | Imin. | Imax. | Output Peak Current(3) | Tol. | Ripple & Noise(4) | Max. Power | Average Active Efficiency (typical) @115/230 Vac |
|---|---|---|---|---|---|---|---|---|---|---|
| PMP105-12 | PMP105SF-12 | 12 V | 0 A | 7.50 A | 15.00 A | ±5% | 120 mV | 90 W | 87/87% | |
| PMP105-12-1 | PMP105SF-12-1 | 13 V | 0 A | 6.93 A | 13.80 A | ±5% | 130 mV | 90 W | 87/87% | |
| PMP105-13 | PMP105SF-13 | 14-16 V | 0 A | 6.79 A | 13.58 A | ±5% | 150 mV | 95 W | 87/88% | |
| PMP105-13-1 | PMP105SF-13-1 | 18-19 V | 0 A | 5.84 A | 11.60 A | ±5% | 180 mV | 105 W | 88/88% | |
| PMP105-13-3 | PMP105SF-13-3 | 20-21 V | 0 A | 5.25 A | 10.50 A | ±5% | 200 mV | 105 W | 88/89% | |
| PMP105-14 | PMP105SF-14 | 24-25 V | 0 A | 4.38 A | 8.70 A | ±5% | 240 mV | 105 W | 88/89% | |
| PMP105-15 | PMP105SF-15 | 28-29 V | 0 A | 3.75 A | 4.50 A | ±5% | 280 mV | 105 W | 88/89% | |
| PMP105-16 | PMP105SF-16 | 30-32 V | 0 A | 3.50 A | 4.20 A | ±5% | 300 mV | 105 W | 88/89% | |
| PMP105-17 | PMP105SF-17 | 36-38 V | 0 A | 2.92 A | 3.50 A | ±5% | 360 mV | 105 W | 89/90% | |
| PMP105-18 | PMP105SF-18 | 46-50 V | 0 A | 2.29 A | 2.70 A | ±5% | 480 mV | 105 W | 90/91% |
NOTES:
- Class I models are equipped with IEC320/C14 inlet. To order a model with C6 inlet, add "S" to the prefix, PMP105, of model number, e.g. PMP105S-12.
- Class II models are equipped with IEC320/C8 inlet. To order a model with C18 inlet, change "SF" in the prefix of model number to "F", e.g. PMP105F-12.
- For 10 seconds maximum, average power not to exceed maximum power rating.
- Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.
MECHANICAL SPECIFICATIONS
The power supply is enclosed in a 94V-0 rated polycarbonate case. Dimensions are approximately 5.76 inches [146.2 mm] in length, 2.96 inches [75.2 mm] in width, and 1.54 inches [39.0 mm] in height. It features rubber feet for stability.
AC Input Connectors:
- IEC320/C14 inlet (Class I) or IEC320/C6 inlet (Class I).
- For Class II models, IEC320/C8 inlet or IEC320/C18 inlet is used.
DC Output: A standard DC output connector is present.
Indicators: Includes a Power ON Indicator.
NOTES:
- Dimensions shown in inches [mm], tolerance 0.02 [0.5] maximum.
- Weight: 681 grams (1.505 lbs.) approx.
- Refer to Section titled "OPTIONAL OUTPUT CONNECTORS". Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP105-14-B1, for ordering.
- Output cable length of PMP105-12, PMP105-12-1, and PMP105-13 is 37.4 inches [950mm].
PIN CHART
| PIN | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| Function | V1 Return | +V1 | V1 Return | +V1 |
OUTPUT POWER DERATING CURVE
The output power derating curve illustrates that the output power decreases linearly from 100% at 40°C ambient temperature to 50% at 60°C ambient temperature.
