BH SERIES EVAPORATOR COILS
LIGHT COMMERCIAL SLAB HORIZONTAL
SINGLE CIRCUIT COIL
A diagram shows a single circuit evaporator coil with dimensions labeled W, H, D, and B, and openings labeled C.
DOUBLE CIRCUIT COIL
A diagram shows a double circuit evaporator coil with dimensions labeled W, H, D, and B, and openings labeled C.
Representative image only. Some models may vary in appearance.
STANDARD FEATURES
- Riffled copper tubing, enhanced aluminum fins.
- Single circuit. Dual circuitry available. Dual circuit coils can be split top-to-bottom or interfaced.
- Immersion tested at 500 psi, followed by nitrogen pressurization and factory sealed to ensure optimal system integrity and long-term reliability.
- Standard refrigerant and plumbing connections:
- Liquid line: 3/8" ODS
- Suction line: 3/4" ODS on 1-1/2-ton to 3-ton; 7/8" ODS on 3-1/2-ton to 5-ton
- Condensate Drains: 3/4" NPT
- Powder-painted galvanized steel drain pans.
- Front access panel for easy service.
- Heavy gauge embossed galvanized cabinets fully lined with 1/2" faced insulation.
- Factory installed 20% bleed port TXV(s) standard.
- A2L refrigerants require a Refrigerant Detection System (RDS) for compliance.
- ETL listed for R22 and R410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS).
WARRANTY
- Five-year limited warranty with registration.
BH SERIES PERFORMANCE & DIMENSIONAL DATA (In.)
| COIL MODEL | CONNECTIONS | DIMENSIONS | SHIPPING WEIGHT (LBS) | # OF ROWS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LIQ. LINE OD | SUCT. LINE OD | HEIGHT H" | DEPTH D" | WIDTH W" | OPENINGS C" | OPENINGS B" | 2 | 3 | 4 | ||
| SINGLE CIRCUIT COILS | |||||||||||
| BHA24 36+X* | 3/8 | 3/4 | 23-1/2 | 10 | 29-1/2 | 21 | 24 | 29 | 43 | - | |
| BHA40 48+X* | 3/8 | 7/8 | 23-1/2 | 10 | 34-1/2 | 21 | 29 | 35 | 49 | - | |
| BHA40 60+X* | 3/8 | 7/8 | 25 | 10 | 34-1/2 | 21 | 29 | 45 | 54 | - | |
| BH132 72+X* | 3/8 | 7/8 | 25-1/2 | 10 | 41-1/2 | 21 | 36 | 44 | 58 | - | |
| BH332 72+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH132 90+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH332 90+X* | 3/8 | 7/8 | 25-1/2 | 10 | 50-1/2 | 21 | 45 | - | 73 | 87 | |
| BH132 120+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH332 120+X* | 3/8 | 7/8 | 25-1/2 | 10 | 50-1/2 | 21 | 45 | - | 73 | 87 | |
| DOUBLE CIRCUIT COILS | |||||||||||
| BHA24 36+X* | 3/8 | 3/4 | 23-1/2 | 10 | 29-1/2 | 21 | 24 | 29 | 43 | - | |
| BHA40 48+X* | 3/8 | 7/8 | 23-1/2 | 10 | 34-1/2 | 21 | 29 | 35 | 49 | - | |
| BHA40 60+X* | 3/8 | 7/8 | 25 | 10 | 34-1/2 | 21 | 29 | 45 | 54 | - | |
| BH140 72+X* | 3/8 | 7/8 | 25-1/2 | 10 | 41-1/2 | 21 | 36 | 44 | 58 | - | |
| BH340 72+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH140 90+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH340 90+X* | 3/8 | 7/8 | 25-1/2 | 10 | 50-1/2 | 21 | 45 | - | 73 | 87 | |
| BH140 120+X* | 3/8 | 7/8 | 25-1/2 | 10 | 47-1/2 | 21 | 42 | - | 68 | 82 | |
| BH340 120+X* | 3/8 | 7/8 | 25-1/2 | 10 | 50-1/2 | 21 | 45 | - | 73 | 87 | |
TXV offering (factory installed): Order X4 for R410 XXX: TTB = Top to Bottom; INT = Interfaced
Notes: Slabs are oriented with delta plates facing the side walls of the cabinet. Refrigerant and plumbing connections exit cabinet front. Top duct opening size can be obtained by subtracting 1x from width or depth. Bottom duct opening size can be obtained by subtracting 3/4 from width or depth. CC120D coil available only in 50-1/2" width, but can fit multiple furnace dimensions with supplied block off plates. (*) = 50/50 circuit split; 1 = intertwined circuits)
| DUAL CIRCUIT COMMERCIAL COILS | SINGLE CIRCUIT R410A TXV | DUAL CIRCUIT USE 2 R410A TXV |
| BH72**(*) | (4) 4202 | (4) 4200 |
| BH90**(*) | (4) 3947+3948 | (4) 4202 |
| BH120**(*) | (4) 3947+3948 | (4) 4202 |
| DRAIN PAN TEMPERATURE TABLE | |
| DRAIN PAN TYPE | TEMPERATURE LIMITS |
| Plastic - Standard | 290° |
| Plastic - High Temp | 425° |
| Metal - High Temp | 600° |
HELPFUL LINKS
VIEW PRODUCT ONLINE
For full warranty terms and conditions, please refer to the Warranty Information section on Aspen's official website.
AHRI QUICK MATCH TOOL
Identify the correct AHRI-certified match for any Aspen coil, air handler, or Aspen PRO air handler. Available on the Resources page.
In keeping with its commitment to continuous improvement, Aspen Manufacturing reserves the right to make changes without notice and incurring obligation. To stay up-to-date with this product and Aspen's trusted line of coils, air handlers, and more, visit the Aspen Manufacturing website.
© 2025 Aspen Manufacturing. All Rights Reserved
Contact Information:
Phone: 281.441.6500
Toll Free: 800.423.9007
Fax: 281.441.6510
Customer Service: info@aspenmfg.com
Warranty Team: warranty@aspenmfg.com
Visit us at: www.aspenmfg.com
